kernel.git/arch/arm64/kvm/debug.c, branch linux-5.13.y

Merge branch 'kvm-arm64/debug-5.13' into kvmarm-master/next

2021-04-13T14:34:15Z

Signed-off-by: Marc Zyngier

KVM: arm64: Initialize VCPU mdcr_el2 before loading it

2021-04-07T15:40:03Z

When a VCPU is created, the kvm_vcpu struct is initialized to zero in kvm_vm_ioctl_create_vcpu(). On VHE systems, the first time vcpu.arch.mdcr_el2 is loaded on hardware is in vcpu_load(), before it is set to a sensible value in kvm_arm_setup_debug() later in the run loop. The result is that KVM executes for a short time with MDCR_EL2 set to zero. This has several unintended consequences: * Setting MDCR_EL2.HPMN to 0 is constrained unpredictable according to ARM DDI 0487G.a, page D13-3820. The behavior specified by the architecture in this case is for the PE to behave as if MDCR_EL2.HPMN is set to a value less than or equal to PMCR_EL0.N, which means that an unknown number of counters are now disabled by MDCR_EL2.HPME, which is zero. * The host configuration for the other debug features controlled by MDCR_EL2 is temporarily lost. This has been harmless so far, as Linux doesn't use the other fields, but that might change in the future. Let's avoid both issues by initializing the VCPU's mdcr_el2 field in kvm_vcpu_vcpu_first_run_init(), thus making sure that the MDCR_EL2 register has a consistent value after each vcpu_load(). Fixes: d5a21bcc2995 ("KVM: arm64: Move common VHE/non-VHE trap config in separate functions") Signed-off-by: Alexandru Elisei Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210407144857.199746-3-alexandru.elisei@arm.com

arm64: KVM: Enable access to TRBE support for host

2021-04-06T22:05:28Z

For a nvhe host, the EL2 must allow the EL1&0 translation regime for TraceBuffer (MDCR_EL2.E2TB == 0b11). This must be saved/restored over a trip to the guest. Also, before entering the guest, we must flush any trace data if the TRBE was enabled. And we must prohibit the generation of trace while we are in EL1 by clearing the TRFCR_EL1. For vhe, the EL2 must prevent the EL1 access to the Trace Buffer. The MDCR_EL2 bit definitions for TRBE are available here : https://developer.arm.com/documentation/ddi0601/2020-12/AArch64-Registers/ Cc: Will Deacon Cc: Catalin Marinas Cc: Marc Zyngier Cc: Mark Rutland Cc: Anshuman Khandual Signed-off-by: Suzuki K Poulose Acked-by: Marc Zyngier Link: https://lore.kernel.org/r/20210405164307.1720226-8-suzuki.poulose@arm.com Signed-off-by: Mathieu Poirier

KVM: arm64: Move SPE availability check to VCPU load

2021-04-06T22:05:20Z

At the moment, we check the availability of SPE on the given CPU (i.e, SPE is implemented and is allowed at the host) during every guest entry. This can be optimized a bit by moving the check to vcpu_load time and recording the availability of the feature on the current CPU via a new flag. This will also be useful for adding the TRBE support. Cc: Marc Zyngier Cc: Will Deacon Cc: Alexandru Elisei Cc: James Morse Signed-off-by: Suzuki K Poulose Acked-by: Marc Zyngier Link: https://lore.kernel.org/r/20210405164307.1720226-7-suzuki.poulose@arm.com Signed-off-by: Mathieu Poirier

KVM: arm64: Disable guest access to trace filter controls

2021-03-24T17:26:38Z

Disable guest access to the Trace Filter control registers. We do not advertise the Trace filter feature to the guest (ID_AA64DFR0_EL1: TRACE_FILT is cleared) already, but the guest can still access the TRFCR_EL1 unless we trap it. This will also make sure that the guest cannot fiddle with the filtering controls set by a nvhe host. Cc: Marc Zyngier Cc: Will Deacon Cc: Mark Rutland Cc: Catalin Marinas Signed-off-by: Suzuki K Poulose Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210323120647.454211-3-suzuki.poulose@arm.com

KVM: arm64: Write arch.mdcr_el2 changes since last vcpu_load on VHE

2020-01-22T18:38:04Z

On VHE systems arch.mdcr_el2 is written to mdcr_el2 at vcpu_load time to set options for self-hosted debug and the performance monitors extension. Unfortunately the value of arch.mdcr_el2 is not calculated until kvm_arm_setup_debug() in the run loop after the vcpu has been loaded. This means that the initial brief iterations of the run loop use a zero value of mdcr_el2 - until the vcpu is preempted. This also results in a delay between changes to vcpu->guest_debug taking effect. Fix this by writing to mdcr_el2 in kvm_arm_setup_debug() on VHE systems when a change to arch.mdcr_el2 has been detected. Fixes: d5a21bcc2995 ("KVM: arm64: Move common VHE/non-VHE trap config in separate functions") Cc: # 4.17.x- Suggested-by: James Morse Acked-by: Will Deacon Reviewed-by: Marc Zyngier Signed-off-by: Andrew Murray Signed-off-by: Catalin Marinas

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234

2019-06-19T15:09:07Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Reviewed-by: Enrico Weigelt Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman

arm/arm64: KVM: Introduce kvm_call_hyp_ret()

2019-02-19T21:05:24Z

Until now, we haven't differentiated between HYP calls that have a return value and those who don't. As we're about to change this, introduce kvm_call_hyp_ret(), and change all call sites that actually make use of a return value. Signed-off-by: Marc Zyngier Acked-by: Christoffer Dall Signed-off-by: Christoffer Dall

arm64: KVM: Consistently advance singlestep when emulating instructions

2018-12-18T14:11:37Z

When we emulate a guest instruction, we don't advance the hardware singlestep state machine, and thus the guest will receive a software step exception after a next instruction which is not emulated by the host. We bodge around this in an ad-hoc fashion. Sometimes we explicitly check whether userspace requested a single step, and fake a debug exception from within the kernel. Other times, we advance the HW singlestep state rely on the HW to generate the exception for us. Thus, the observed step behaviour differs for host and guest. Let's make this simpler and consistent by always advancing the HW singlestep state machine when we skip an instruction. Thus we can rely on the hardware to generate the singlestep exception for us, and never need to explicitly check for an active-pending step, nor do we need to fake a debug exception from the guest. Cc: Peter Maydell Reviewed-by: Alex Bennée Reviewed-by: Christoffer Dall Signed-off-by: Mark Rutland Signed-off-by: Marc Zyngier

KVM: arm64: Repurpose vcpu_arch.debug_flags for general-purpose flags

2018-05-25T11:28:13Z

In struct vcpu_arch, the debug_flags field is used to store debug-related flags about the vcpu state. Since we are about to add some more flags related to FPSIMD and SVE, it makes sense to add them to the existing flags field rather than adding new fields. Since there is only one debug_flags flag defined so far, there is plenty of free space for expansion. In preparation for adding more flags, this patch renames the debug_flags field to simply "flags", and updates comments appropriately. The flag definitions are also moved to , since their presence in was for purely historical reasons: these definitions are not used from asm any more, and not very likely to be as more Hyp asm is migrated to C. KVM_ARM64_DEBUG_DIRTY_SHIFT has not been used since commit 1ea66d27e7b0 ("arm64: KVM: Move away from the assembly version of the world switch"), so this patch gets rid of that too. No functional change. Signed-off-by: Dave Martin Reviewed-by: Marc Zyngier Reviewed-by: Alex Bennée Acked-by: Christoffer Dall [maz: fixed minor conflict] Signed-off-by: Marc Zyngier