kernel.git/arch/arm64/kvm/Makefile, branch master

KVM: arm64: gic-v5: Probe for GICv5

2025-07-08T21:41:06Z

Add in a probe function for GICv5 which enables support for GICv3 guests on a GICv5 host, if FEAT_GCIE_LEGACY is supported by the hardware. Co-authored-by: Timothy Hayes Signed-off-by: Timothy Hayes Signed-off-by: Sascha Bischoff Link: https://lore.kernel.org/r/20250627100847.1022515-6-sascha.bischoff@arm.com Signed-off-by: Oliver Upton

KVM: arm64: Switch to table-driven FGU configuration

2025-05-10T10:04:35Z

Defining the FGU behaviour is extremely tedious. It relies on matching each set of bits from FGT registers with am architectural feature, and adding them to the FGU list if the corresponding feature isn't advertised to the guest. It is however relatively easy to dump most of that information from the architecture JSON description, and use that to control the FGU bits. Let's introduce a new set of tables descripbing the mapping between FGT bits and features. Most of the time, this is only a lookup in an idreg field, with a few more complex exceptions. While this is obviously many more lines in a new file, this is mostly generated, and is pretty easy to maintain. Reviewed-by: Joey Gouly Signed-off-by: Marc Zyngier

KVM: arm64: nv: Plumb handling of GICv3 EL2 accesses

2025-03-03T22:55:10Z

Wire the handling of all GICv3 EL2 registers, and provide emulation for all the non memory-backed registers (ICC_SRE_EL2, ICH_VTR_EL2, ICH_MISR_EL2, ICH_ELRSR_EL2, and ICH_EISR_EL2). Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20250225172930.1850838-7-maz@kernel.org Signed-off-by: Oliver Upton

Merge branch kvm-arm64/s2-ptdump into kvmarm-master/next

2024-09-12T07:38:02Z

* kvm-arm64/s2-ptdump: : . : Stage-2 page table dumper, reusing the main ptdump infrastructure, : courtesy of Sebastian Ene. From the cover letter: : : "This series extends the ptdump support to allow dumping the guest : stage-2 pagetables. When CONFIG_PTDUMP_STAGE2_DEBUGFS is enabled, ptdump : registers the new following files under debugfs: : - /sys/debug/kvm//stage2_page_tables : - /sys/debug/kvm//stage2_levels : - /sys/debug/kvm//ipa_range : : This allows userspace tools (eg. cat) to dump the stage-2 pagetables by : reading the 'stage2_page_tables' file. : [...]" : . KVM: arm64: Register ptdump with debugfs on guest creation arm64: ptdump: Don't override the level when operating on the stage-2 tables arm64: ptdump: Use the ptdump description from a local context arm64: ptdump: Expose the attribute parsing functionality KVM: arm64: Move pagetable definitions to common header Signed-off-by: Marc Zyngier

Merge branch kvm-arm64/nv-at-pan into kvmarm-master/next

2024-09-12T07:37:47Z

* kvm-arm64/nv-at-pan: : . : Add NV support for the AT family of instructions, which mostly results : in adding a page table walker that deals with most of the complexity : of the architecture. : : From the cover letter: : : "Another task that a hypervisor supporting NV on arm64 has to deal with : is to emulate the AT instruction, because we multiplex all the S1 : translations on a single set of registers, and the guest S2 is never : truly resident on the CPU. : : So given that we lie about page tables, we also have to lie about : translation instructions, hence the emulation. Things are made : complicated by the fact that guest S1 page tables can be swapped out, : and that our shadow S2 is likely to be incomplete. So while using AT : to emulate AT is tempting (and useful), it is not going to always : work, and we thus need a fallback in the shape of a SW S1 walker." : . KVM: arm64: nv: Add support for FEAT_ATS1A KVM: arm64: nv: Plumb handling of AT S1* traps from EL2 KVM: arm64: nv: Make AT+PAN instructions aware of FEAT_PAN3 KVM: arm64: nv: Sanitise SCTLR_EL1.EPAN according to VM configuration KVM: arm64: nv: Add SW walker for AT S1 emulation KVM: arm64: nv: Make ps_to_output_size() generally available KVM: arm64: nv: Add emulation of AT S12E{0,1}{R,W} KVM: arm64: nv: Add basic emulation of AT S1E2{R,W} KVM: arm64: nv: Add basic emulation of AT S1E1{R,W}P KVM: arm64: nv: Add basic emulation of AT S1E{0,1}{R,W} KVM: arm64: nv: Honor absence of FEAT_PAN2 KVM: arm64: nv: Turn upper_attr for S2 walk into the full descriptor KVM: arm64: nv: Enforce S2 alignment when contiguous bit is set arm64: Add ESR_ELx_FSC_ADDRSZ_L() helper arm64: Add system register encoding for PSTATE.PAN arm64: Add PAR_EL1 field description arm64: Add missing APTable and TCR_ELx.HPD masks KVM: arm64: Make kvm_at() take an OP_AT_* Signed-off-by: Marc Zyngier # Conflicts: # arch/arm64/kvm/nested.c

KVM: arm64: Register ptdump with debugfs on guest creation

2024-09-10T20:32:51Z

While arch/*/mem/ptdump handles the kernel pagetable dumping code, introduce KVM/ptdump to show the guest stage-2 pagetables. The separation is necessary because most of the definitions from the stage-2 pagetable reside in the KVM path and we will be invoking functionality specific to KVM. Introduce the PTDUMP_STAGE2_DEBUGFS config. When a guest is created, register a new file entry under the guest debugfs dir which allows userspace to show the contents of the guest stage-2 pagetables when accessed. [maz: moved function prototypes from kvm_host.h to kvm_mmu.h] Signed-off-by: Sebastian Ene Reviewed-by: Vincent Donnefort Link: https://lore.kernel.org/r/20240909124721.1672199-6-sebastianene@google.com Signed-off-by: Marc Zyngier

KVM: arm64: nv: Add basic emulation of AT S1E{0,1}{R,W}

2024-08-30T11:04:20Z

Emulating AT instructions is one the tasks devolved to the host hypervisor when NV is on. Here, we take the basic approach of emulating AT S1E{0,1}{R,W} using the AT instructions themselves. While this mostly work, it doesn't *always* work: - S1 page tables can be swapped out - shadow S2 can be incomplete and not contain mappings for the S1 page tables We are not trying to handle these case here, and defer it to a later patch. Suitable comments indicate where we are in dire need of better handling. Co-developed-by: Jintack Lim Signed-off-by: Jintack Lim Signed-off-by: Marc Zyngier

KVM: arm64: fix override-init warnings in W=1 builds

2024-08-02T18:58:03Z

Add -Wno-override-init to the build flags for sys_regs.c, handle_exit.c, and switch.c to fix warnings like the following: arch/arm64/kvm/hyp/vhe/switch.c:271:43: warning: initialized field overwritten [-Woverride-init] 271 | [ESR_ELx_EC_CP15_32] = kvm_hyp_handle_cp15_32, | Signed-off-by: Sebastian Ott Reviewed-by: Marc Zyngier Link: https://lore.kernel.org/r/20240723101204.7356-2-sebott@redhat.com Signed-off-by: Oliver Upton

Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2024-05-18T19:39:20Z

Pull Kbuild updates from Masahiro Yamada: - Avoid 'constexpr', which is a keyword in C23 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of 'dt_binding_check' - Fix weak references to avoid GOT entries in position-independent code generation - Convert the last use of 'optional' property in arch/sh/Kconfig - Remove support for the 'optional' property in Kconfig - Remove support for Clang's ThinLTO caching, which does not work with the .incbin directive - Change the semantics of $(src) so it always points to the source directory, which fixes Makefile inconsistencies between upstream and downstream - Fix 'make tar-pkg' for RISC-V to produce a consistent package - Provide reasonable default coverage for objtool, sanitizers, and profilers - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc. - Remove the last use of tristate choice in drivers/rapidio/Kconfig - Various cleanups and fixes in Kconfig * tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits) kconfig: use sym_get_choice_menu() in sym_check_prop() rapidio: remove choice for enumeration kconfig: lxdialog: remove initialization with A_NORMAL kconfig: m/nconf: merge two item_add_str() calls kconfig: m/nconf: remove dead code to display value of bool choice kconfig: m/nconf: remove dead code to display children of choice members kconfig: gconf: show checkbox for choice correctly kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal Makefile: remove redundant tool coverage variables kbuild: provide reasonable defaults for tool coverage modules: Drop the .export_symbol section from the final modules kconfig: use menu_list_for_each_sym() in sym_check_choice_deps() kconfig: use sym_get_choice_menu() in conf_write_defconfig() kconfig: add sym_get_choice_menu() helper kconfig: turn defaults and additional prompt for choice members into error kconfig: turn missing prompt for choice members into error kconfig: turn conf_choice() into void function kconfig: use linked list in sym_set_changed() kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED kconfig: gconf: remove debug code ...

kbuild: use $(src) instead of $(srctree)/$(src) for source directory

2024-05-09T19:34:52Z

Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for checked-in source files. It is merely a convention without any functional difference. In fact, $(obj) and $(src) are exactly the same, as defined in scripts/Makefile.build: src := $(obj) When the kernel is built in a separate output directory, $(src) does not accurately reflect the source directory location. While Kbuild resolves this discrepancy by specifying VPATH=$(srctree) to search for source files, it does not cover all cases. For example, when adding a header search path for local headers, -I$(srctree)/$(src) is typically passed to the compiler. This introduces inconsistency between upstream and downstream Makefiles because $(src) is used instead of $(srctree)/$(src) for the latter. To address this inconsistency, this commit changes the semantics of $(src) so that it always points to the directory in the source tree. Going forward, the variables used in Makefiles will have the following meanings: $(obj) - directory in the object tree $(src) - directory in the source tree (changed by this commit) $(objtree) - the top of the kernel object tree $(srctree) - the top of the kernel source tree Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced with $(src). Signed-off-by: Masahiro Yamada Reviewed-by: Nicolas Schier