kernel.git/arch/arm64/kernel/traps.c, branch linux-5.18.y

Merge tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

2022-03-24T01:03:08Z

Pull asm-generic updates from Arnd Bergmann: "There are three sets of updates for 5.18 in the asm-generic tree: - The set_fs()/get_fs() infrastructure gets removed for good. This was already gone from all major architectures, but now we can finally remove it everywhere, which loses some particularly tricky and error-prone code. There is a small merge conflict against a parisc cleanup, the solution is to use their new version. - The nds32 architecture ends its tenure in the Linux kernel. The hardware is still used and the code is in reasonable shape, but the mainline port is not actively maintained any more, as all remaining users are thought to run vendor kernels that would never be updated to a future release. - A series from Masahiro Yamada cleans up some of the uapi header files to pass the compile-time checks" * tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits) nds32: Remove the architecture uaccess: remove CONFIG_SET_FS ia64: remove CONFIG_SET_FS support sh: remove CONFIG_SET_FS support sparc64: remove CONFIG_SET_FS support lib/test_lockup: fix kernel pointer check for separate address spaces uaccess: generalize access_ok() uaccess: fix type mismatch warnings from access_ok() arm64: simplify access_ok() m68k: fix access_ok for coldfire MIPS: use simpler access_ok() MIPS: Handle address errors for accesses above CPU max virtual user address uaccess: add generic __{get,put}_kernel_nofault nios2: drop access_ok() check from __put_user() x86: use more conventional access_ok() definition x86: remove __range_not_ok() sparc64: add __{get,put}_kernel_nofault() nds32: fix access_ok() checks in get/put_user uaccess: fix nios2 and microblaze get_user_8() sparc64: fix building assembly files ...

arm64: drop unused includes of

2022-03-08T10:23:42Z

Drop several includes of which are not used. git-blame indicates they were used at some point, but they're not needed anymore. Signed-off-by: Sagar Patel Link: https://lore.kernel.org/r/20220307222412.146506-1-sagarmp@cs.unc.edu Signed-off-by: Will Deacon

uaccess: remove CONFIG_SET_FS

2022-02-25T08:36:06Z

There are no remaining callers of set_fs(), so CONFIG_SET_FS can be removed globally, along with the thread_info field and any references to it. This turns access_ok() into a cheaper check against TASK_SIZE_MAX. As CONFIG_SET_FS is now gone, drop all remaining references to set_fs()/get_fs(), mm_segment_t, user_addr_max() and uaccess_kernel(). Acked-by: Sam Ravnborg # for sparc32 changes Acked-by: "Eric W. Biederman" Tested-by: Sergey Matyukevich # for arc changes Acked-by: Stafford Horne # [openrisc, asm-generic] Acked-by: Dinh Nguyen Signed-off-by: Arnd Bergmann

Merge branch 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2022-01-17T03:49:30Z

Pull signal/exit/ptrace updates from Eric Biederman: "This set of changes deletes some dead code, makes a lot of cleanups which hopefully make the code easier to follow, and fixes bugs found along the way. The end-game which I have not yet reached yet is for fatal signals that generate coredumps to be short-circuit deliverable from complete_signal, for force_siginfo_to_task not to require changing userspace configured signal delivery state, and for the ptrace stops to always happen in locations where we can guarantee on all architectures that the all of the registers are saved and available on the stack. Removal of profile_task_ext, profile_munmap, and profile_handoff_task are the big successes for dead code removal this round. A bunch of small bug fixes are included, as most of the issues reported were small enough that they would not affect bisection so I simply added the fixes and did not fold the fixes into the changes they were fixing. There was a bug that broke coredumps piped to systemd-coredump. I dropped the change that caused that bug and replaced it entirely with something much more restrained. Unfortunately that required some rebasing. Some successes after this set of changes: There are few enough calls to do_exit to audit in a reasonable amount of time. The lifetime of struct kthread now matches the lifetime of struct task, and the pointer to struct kthread is no longer stored in set_child_tid. The flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is removed. Issues where task->exit_code was examined with signal->group_exit_code should been examined were fixed. There are several loosely related changes included because I am cleaning up and if I don't include them they will probably get lost. The original postings of these changes can be found at: https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org I trimmed back the last set of changes to only the obviously correct once. Simply because there was less time for review than I had hoped" * 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits) ptrace/m68k: Stop open coding ptrace_report_syscall ptrace: Remove unused regs argument from ptrace_report_syscall ptrace: Remove second setting of PT_SEIZED in ptrace_attach taskstats: Cleanup the use of task->exit_code exit: Use the correct exit_code in /proc//stat exit: Fix the exit_code for wait_task_zombie exit: Coredumps reach do_group_exit exit: Remove profile_handoff_task exit: Remove profile_task_exit & profile_munmap signal: clean up kernel-doc comments signal: Remove the helper signal_group_exit signal: Rename group_exit_task group_exec_task coredump: Stop setting signal->group_exit_task signal: Remove SIGNAL_GROUP_COREDUMP signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process signal: Make coredump handling explicit in complete_signal signal: Have prepare_signal detect coredumps using signal->core_state signal: Have the oom killer detect coredumps using signal->core_state exit: Move force_uaccess back into do_exit exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit ...

exit: Add and use make_task_dead.

2021-12-13T18:04:45Z

There are two big uses of do_exit. The first is it's design use to be the guts of the exit(2) system call. The second use is to terminate a task after something catastrophic has happened like a NULL pointer in kernel code. Add a function make_task_dead that is initialy exactly the same as do_exit to cover the cases where do_exit is called to handle catastrophic failure. In time this can probably be reduced to just a light wrapper around do_task_dead. For now keep it exactly the same so that there will be no behavioral differences introducing this new concept. Replace all of the uses of do_exit that use it for catastraphic task cleanup with make_task_dead to make it clear what the code is doing. As part of this rename rewind_stack_do_exit rewind_stack_and_make_dead. Signed-off-by: "Eric W. Biederman"

arm64/bpf: Remove 128MB limit for BPF JIT programs

2021-11-08T21:16:26Z

Commit 91fc957c9b1d ("arm64/bpf: don't allocate BPF JIT programs in module memory") restricts BPF JIT program allocation to a 128MB region to ensure BPF programs are still in branching range of each other. However this restriction should not apply to the aarch64 JIT, since BPF_JMP | BPF_CALL are implemented as a 64-bit move into a register and then a BLR instruction - which has the effect of being able to call anything without proximity limitation. The practical reason to relax this restriction on JIT memory is that 128MB of JIT memory can be quickly exhausted, especially where PAGE_SIZE is 64KB - one page is needed per program. In cases where seccomp filters are applied to multiple VMs on VM launch - such filters are classic BPF but converted to BPF - this can severely limit the number of VMs that can be launched. In a world where we support BPF JIT always on, turning off the JIT isn't always an option either. Fixes: 91fc957c9b1d ("arm64/bpf: don't allocate BPF JIT programs in module memory") Suggested-by: Ard Biesheuvel Signed-off-by: Russell King Signed-off-by: Daniel Borkmann Tested-by: Alan Maguire Link: https://lore.kernel.org/bpf/1636131046-5982-2-git-send-email-alan.maguire@oracle.com

Merge branch 'for-next/misc' into for-next/core

2021-10-29T11:24:59Z

* for-next/misc: arm64: Select POSIX_CPU_TIMERS_TASK_WORK arm64: Document boot requirements for FEAT_SME_FA64 arm64: ftrace: use function_nocfi for _mcount as well arm64: asm: setup.h: export common variables arm64/traps: Avoid unnecessary kernel/user pointer conversion

Merge branch 'for-next/extable' into for-next/core

2021-10-29T11:24:37Z

* for-next/extable: arm64: vmlinux.lds.S: remove `.fixup` section arm64: extable: add load_unaligned_zeropad() handler arm64: extable: add a dedicated uaccess handler arm64: extable: add `type` and `data` fields arm64: extable: use `ex` for `exception_table_entry` arm64: extable: make fixup_exception() return bool arm64: extable: consolidate definitions arm64: gpr-num: support W registers arm64: factor out GPR numbering helpers arm64: kvm: use kvm_exception_table_entry arm64: lib: __arch_copy_to_user(): fold fixups into body arm64: lib: __arch_copy_from_user(): fold fixups into body arm64: lib: __arch_clear_user(): fold fixups into body

arm64: extable: add a dedicated uaccess handler

2021-10-21T09:45:22Z

For inline assembly, we place exception fixups out-of-line in the `.fixup` section such that these are out of the way of the fast path. This has a few drawbacks: * Since the fixup code is anonymous, backtraces will symbolize fixups as offsets from the nearest prior symbol, currently `__entry_tramp_text_end`. This is confusing, and painful to debug without access to the relevant vmlinux. * Since the exception handler adjusts the PC to execute the fixup, and the fixup uses a direct branch back into the function it fixes, backtraces of fixups miss the original function. This is confusing, and violates requirements for RELIABLE_STACKTRACE (and therefore LIVEPATCH). * Inline assembly and associated fixups are generated from templates, and we have many copies of logically identical fixups which only differ in which specific registers are written to and which address is branched to at the end of the fixup. This is potentially wasteful of I-cache resources, and makes it hard to add additional logic to fixups without significant bloat. This patch address all three concerns for inline uaccess fixups by adding a dedicated exception handler which updates registers in exception context and subsequent returns back into the function which faulted, removing the need for fixups specialized to each faulting instruction. Other than backtracing, there should be no functional change as a result of this patch. Signed-off-by: Mark Rutland Reviewed-by: Ard Biesheuvel Cc: Catalin Marinas Cc: James Morse Cc: Robin Murphy Cc: Will Deacon Link: https://lore.kernel.org/r/20211019160219.5202-12-mark.rutland@arm.com Signed-off-by: Will Deacon

arm64: Add handling of CNTVCTSS traps

2021-10-19T09:56:20Z

Since CNTVCTSS obey the same control bits as CNTVCT, add the necessary decoding to the hook table. Note that there is no known user of this at the moment. Acked-by: Will Deacon Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20211017124225.3018098-17-maz@kernel.org Signed-off-by: Will Deacon