kernel.git/arch/arm64/kernel/suspend.c, branch linux-4.14.y

arm64: ssbd: Restore mitigation status on CPU resume

2018-07-22T12:28:51Z

commit 647d0519b53f440a55df163de21c52a8205431cc upstream. On a system where firmware can dynamically change the state of the mitigation, the CPU will always come up with the mitigation enabled, including when coming back from suspend. If the user has requested "no mitigation" via a command line option, let's enforce it by calling into the firmware again to disable it. Similarily, for a resume from hibernate, the mitigation could have been disabled by the boot kernel. Let's ensure that it is set back on in that case. Acked-by: Will Deacon Reviewed-by: Mark Rutland Signed-off-by: Marc Zyngier Signed-off-by: Catalin Marinas Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

arm64: move sp_el0 and tpidr_el1 into cpu_suspend_ctx

2016-11-11T18:25:44Z

When returning from idle, we rely on the fact that thread_info lives at the end of the kernel stack, and restore this by masking the saved stack pointer. Subsequent patches will sever the relationship between the stack and thread_info, and to cater for this we must save/restore sp_el0 explicitly, storing it in cpu_suspend_ctx. As cpu_suspend_ctx must be doubleword aligned, this leaves us with an extra slot in cpu_suspend_ctx. We can use this to save/restore tpidr_el1 in the same way, which simplifies the code, avoiding pointer chasing on the restore path (as we no longer need to load thread_info::cpu followed by the relevant slot in __per_cpu_offset based on this). This patch stashes both registers in cpu_suspend_ctx. Signed-off-by: Mark Rutland Tested-by: Laura Abbott Cc: James Morse Cc: Lorenzo Pieralisi Cc: Will Deacon Signed-off-by: Catalin Marinas

arm64: suspend: Reconfigure PSTATE after resume from idle

2016-10-20T08:50:54Z

The suspend/resume path in kernel/sleep.S, as used by cpu-idle, does not save/restore PSTATE. As a result of this cpufeatures that were detected and have bits in PSTATE get lost when we resume from idle. UAO gets set appropriately on the next context switch. PAN will be re-enabled next time we return from user-space, but on a preemptible kernel we may run work accessing user space before this point. Add code to re-enable theses two features in __cpu_suspend_exit(). We re-use uao_thread_switch() passing current. Signed-off-by: James Morse Cc: Lorenzo Pieralisi Signed-off-by: Will Deacon

arm64: hw_breakpoint: convert CPU hotplug notifier to new infrastructure

2016-09-01T12:45:51Z

The arm64 hw_breakpoint implementation uses a CPU hotplug notifier to reset the {break,watch}point registers when CPUs come online. This patch converts the code to the new hotplug mechanism, whilst moving the invocation earlier to remove the need to disable IRQs explicitly in the driver (which could cause havok if we trip a watchpoint in an IRQ handler whilst restoring the debug register state). Cc: Sebastian Andrzej Siewior Reviewed-by: Lorenzo Pieralisi Signed-off-by: Will Deacon

arm64: Change cpu_resume() to enable mmu early then access sleep_sp by va

2016-04-28T11:05:46Z

By enabling the MMU early in cpu_resume(), the sleep_save_sp and stack can be accessed by VA, which avoids the need to convert-addresses and clean to PoC on the suspend path. MMU setup is shared with the boot path, meaning the swapper_pg_dir is restored directly: ttbr1_el1 is no longer saved/restored. struct sleep_save_sp is removed, replacing it with a single array of pointers. cpu_do_{suspend,resume} could be further reduced to not restore: cpacr_el1, mdscr_el1, tcr_el1, vbar_el1 and sctlr_el1, all of which are set by __cpu_setup(). However these values all contain res0 bits that may be used to enable future features. Signed-off-by: James Morse Reviewed-by: Lorenzo Pieralisi Reviewed-by: Catalin Marinas Signed-off-by: Will Deacon

arm64: kernel: Rework finisher callback out of __cpu_suspend_enter()

2016-04-28T11:05:46Z

Hibernate could make use of the cpu_suspend() code to save/restore cpu state, however it needs to be able to return '0' from the 'finisher'. Rework cpu_suspend() so that the finisher is called from C code, independently from the save/restore of cpu state. Space to save the context in is allocated in the caller's stack frame, and passed into __cpu_suspend_enter(). Hibernate's use of this API will look like a copy of the cpu_suspend() function. Signed-off-by: James Morse Acked-by: Lorenzo Pieralisi Reviewed-by: Catalin Marinas Signed-off-by: Will Deacon

arm64: unify idmap removal

2016-02-16T15:10:44Z

We currently open-code the removal of the idmap and restoration of the current task's MMU state in a few places. Before introducing yet more copies of this sequence, unify these to call a new helper, cpu_uninstall_idmap. Signed-off-by: Mark Rutland Reviewed-by: Catalin Marinas Tested-by: Ard Biesheuvel Reviewed-by: Ard Biesheuvel Tested-by: Jeremy Linton Cc: Laura Abbott Cc: Lorenzo Pieralisi Cc: Will Deacon Signed-off-by: Catalin Marinas

arm64: kernel: pause/unpause function graph tracer in cpu_suspend()

2015-11-17T17:11:45Z

The function graph tracer adds instrumentation that is required to trace both entry and exit of a function. In particular the function graph tracer updates the "return address" of a function in order to insert a trace callback on function exit. Kernel power management functions like cpu_suspend() are called upon power down entry with functions called "finishers" that are in turn called to trigger the power down sequence but they may not return to the kernel through the normal return path. When the core resumes from low-power it returns to the cpu_suspend() function through the cpu_resume path, which leaves the trace stack frame set-up by the function tracer in an incosistent state upon return to the kernel when tracing is enabled. This patch fixes the issue by pausing/resuming the function graph tracer on the thread executing cpu_suspend() (ie the function call that subsequently triggers the "suspend finishers"), so that the function graph tracer state is kept consistent across functions that enter power down states and never return by effectively disabling graph tracer while they are executing. Fixes: 819e50e25d0c ("arm64: Add ftrace support") Signed-off-by: Lorenzo Pieralisi Reported-by: Catalin Marinas Reported-by: AKASHI Takahiro Suggested-by: Steven Rostedt Acked-by: Steven Rostedt Cc: Will Deacon Cc: # 3.16+ Signed-off-by: Catalin Marinas

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

2015-11-12T23:33:11Z

Pull arm64 fixes and clean-ups from Catalin Marinas: "Here's a second pull request for this merging window with some fixes/clean-ups: - __cmpxchg_double*() return type fix to avoid truncation of a long to int and subsequent logical "not" in cmpxchg_double() misinterpreting the operation success/failure - BPF fixes for mod and div by zero - Fix compilation with STRICT_MM_TYPECHECKS enabled - VDSO build fix without libgcov - Some static and __maybe_unused annotations - Kconfig clean-up (FRAME_POINTER) - defconfig update for CRYPTO_CRC32_ARM64" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: suspend: make hw_breakpoint_restore static arm64: mmu: make split_pud and fixup_executable static arm64: smp: make of_parse_and_init_cpus static arm64: use linux/types.h in kvm.h arm64: build vdso without libgcov arm64: mark cpus_have_hwcap as __maybe_unused arm64: remove redundant FRAME_POINTER kconfig option and force to select it arm64: fix R/O permissions of FDT mapping arm64: fix STRICT_MM_TYPECHECKS issue in PTE_CONT manipulation arm64: bpf: fix mod-by-zero case arm64: bpf: fix div-by-zero case arm64: Enable CRYPTO_CRC32_ARM64 in defconfig arm64: cmpxchg_dbl: fix return value type