kernel.git/arch/arm64/kernel/smp.c, branch linux-5.6.y

arm64: smp: fix crash_smp_send_stop() behaviour

2020-03-17T22:51:19Z

On a system configured to trigger a crash_kexec() reboot, when only one CPU is online and another CPU panics while starting-up, crash_smp_send_stop() will fail to send any STOP message to the other already online core, resulting in fail to freeze and registers not properly saved. Moreover even if the proper messages are sent (case CPUs > 2) it will similarly fail to account for the booting CPU when executing the final stop wait-loop, so potentially resulting in some CPU not been waited for shutdown before rebooting. A tangible effect of this behaviour can be observed when, after a panic with kexec enabled and loaded, on the following reboot triggered by kexec, the cpu that could not be successfully stopped fails to come back online: [ 362.291022] ------------[ cut here ]------------ [ 362.291525] kernel BUG at arch/arm64/kernel/cpufeature.c:886! [ 362.292023] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 362.292400] Modules linked in: [ 362.292970] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.6.0-rc4-00003-gc780b890948a #105 [ 362.293136] Hardware name: Foundation-v8A (DT) [ 362.293382] pstate: 200001c5 (nzCv dAIF -PAN -UAO) [ 362.294063] pc : has_cpuid_feature+0xf0/0x348 [ 362.294177] lr : verify_local_elf_hwcaps+0x84/0xe8 [ 362.294280] sp : ffff800011b1bf60 [ 362.294362] x29: ffff800011b1bf60 x28: 0000000000000000 [ 362.294534] x27: 0000000000000000 x26: 0000000000000000 [ 362.294631] x25: 0000000000000000 x24: ffff80001189a25c [ 362.294718] x23: 0000000000000000 x22: 0000000000000000 [ 362.294803] x21: ffff8000114aa018 x20: ffff800011156a00 [ 362.294897] x19: ffff800010c944a0 x18: 0000000000000004 [ 362.294987] x17: 0000000000000000 x16: 0000000000000000 [ 362.295073] x15: 00004e53b831ae3c x14: 00004e53b831ae3c [ 362.295165] x13: 0000000000000384 x12: 0000000000000000 [ 362.295251] x11: 0000000000000000 x10: 00400032b5503510 [ 362.295334] x9 : 0000000000000000 x8 : ffff800010c7e204 [ 362.295426] x7 : 00000000410fd0f0 x6 : 0000000000000001 [ 362.295508] x5 : 00000000410fd0f0 x4 : 0000000000000000 [ 362.295592] x3 : 0000000000000000 x2 : ffff8000100939d8 [ 362.295683] x1 : 0000000000180420 x0 : 0000000000180480 [ 362.296011] Call trace: [ 362.296257] has_cpuid_feature+0xf0/0x348 [ 362.296350] verify_local_elf_hwcaps+0x84/0xe8 [ 362.296424] check_local_cpu_capabilities+0x44/0x128 [ 362.296497] secondary_start_kernel+0xf4/0x188 [ 362.296998] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000) [ 362.298652] SMP: stopping secondary CPUs [ 362.300615] Starting crashdump kernel... [ 362.301168] Bye! [ 0.000000] Booting Linux on physical CPU 0x0000000003 [0x410fd0f0] [ 0.000000] Linux version 5.6.0-rc4-00003-gc780b890948a (crimar01@e120937-lin) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #105 SMP PREEMPT Fri Mar 6 17:00:42 GMT 2020 [ 0.000000] Machine model: Foundation-v8A [ 0.000000] earlycon: pl11 at MMIO 0x000000001c090000 (options '') [ 0.000000] printk: bootconsole [pl11] enabled ..... [ 0.138024] rcu: Hierarchical SRCU implementation. [ 0.153472] its@2f020000: unable to locate ITS domain [ 0.154078] its@2f020000: Unable to locate ITS domain [ 0.157541] EFI services will not be available. [ 0.175395] smp: Bringing up secondary CPUs ... [ 0.209182] psci: failed to boot CPU1 (-22) [ 0.209377] CPU1: failed to boot: -22 [ 0.274598] Detected PIPT I-cache on CPU2 [ 0.278707] GICv3: CPU2: found redistributor 1 region 0:0x000000002f120000 [ 0.285212] CPU2: Booted secondary processor 0x0000000001 [0x410fd0f0] [ 0.369053] Detected PIPT I-cache on CPU3 [ 0.372947] GICv3: CPU3: found redistributor 2 region 0:0x000000002f140000 [ 0.378664] CPU3: Booted secondary processor 0x0000000002 [0x410fd0f0] [ 0.401707] smp: Brought up 1 node, 3 CPUs [ 0.404057] SMP: Total of 3 processors activated. Make crash_smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way the right number of STOPs is sent and all other stopped-cores's registers are properly saved. Fixes: 78fd584cdec05 ("arm64: kdump: implement machine_crash_shutdown()") Acked-by: Mark Rutland Signed-off-by: Cristian Marussi Signed-off-by: Will Deacon

arm64: smp: fix smp_send_stop() behaviour

2020-03-17T22:51:18Z

On a system with only one CPU online, when another one CPU panics while starting-up, smp_send_stop() will fail to send any STOP message to the other already online core, resulting in a system still responsive and alive at the end of the panic procedure. [ 186.700083] CPU3: shutdown [ 187.075462] CPU2: shutdown [ 187.162869] CPU1: shutdown [ 188.689998] ------------[ cut here ]------------ [ 188.691645] kernel BUG at arch/arm64/kernel/cpufeature.c:886! [ 188.692079] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 188.692444] Modules linked in: [ 188.693031] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.6.0-rc4-00001-g338d25c35a98 #104 [ 188.693175] Hardware name: Foundation-v8A (DT) [ 188.693492] pstate: 200001c5 (nzCv dAIF -PAN -UAO) [ 188.694183] pc : has_cpuid_feature+0xf0/0x348 [ 188.694311] lr : verify_local_elf_hwcaps+0x84/0xe8 [ 188.694410] sp : ffff800011b1bf60 [ 188.694536] x29: ffff800011b1bf60 x28: 0000000000000000 [ 188.694707] x27: 0000000000000000 x26: 0000000000000000 [ 188.694801] x25: 0000000000000000 x24: ffff80001189a25c [ 188.694905] x23: 0000000000000000 x22: 0000000000000000 [ 188.694996] x21: ffff8000114aa018 x20: ffff800011156a38 [ 188.695089] x19: ffff800010c944a0 x18: 0000000000000004 [ 188.695187] x17: 0000000000000000 x16: 0000000000000000 [ 188.695280] x15: 0000249dbde5431e x14: 0262cbe497efa1fa [ 188.695371] x13: 0000000000000002 x12: 0000000000002592 [ 188.695472] x11: 0000000000000080 x10: 00400032b5503510 [ 188.695572] x9 : 0000000000000000 x8 : ffff800010c80204 [ 188.695659] x7 : 00000000410fd0f0 x6 : 0000000000000001 [ 188.695750] x5 : 00000000410fd0f0 x4 : 0000000000000000 [ 188.695836] x3 : 0000000000000000 x2 : ffff8000100939d8 [ 188.695919] x1 : 0000000000180420 x0 : 0000000000180480 [ 188.696253] Call trace: [ 188.696410] has_cpuid_feature+0xf0/0x348 [ 188.696504] verify_local_elf_hwcaps+0x84/0xe8 [ 188.696591] check_local_cpu_capabilities+0x44/0x128 [ 188.696666] secondary_start_kernel+0xf4/0x188 [ 188.697150] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000) [ 188.698639] ---[ end trace 3f12ca47652f7b72 ]--- [ 188.699160] Kernel panic - not syncing: Attempted to kill the idle task! [ 188.699546] Kernel Offset: disabled [ 188.699828] CPU features: 0x00004,20c02008 [ 188.700012] Memory Limit: none [ 188.700538] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- [root@arch ~]# echo Helo Helo [root@arch ~]# cat /proc/cpuinfo | grep proce processor : 0 Make smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way, the right number of STOPs is sent, so enforcing a proper freeze of the system at the end of panic even under the above conditions. Fixes: 08e875c16a16c ("arm64: SMP support") Reported-by: Dave Martin Acked-by: Mark Rutland Signed-off-by: Cristian Marussi Signed-off-by: Will Deacon

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

2019-12-06T22:18:01Z

Pull arm64 fixes from Catalin Marinas: - ZONE_DMA32 initialisation fix when memblocks fall entirely within the first GB (used by ZONE_DMA in 5.5 for Raspberry Pi 4). - Couple of ftrace fixes following the FTRACE_WITH_REGS patchset. - access_ok() fix for the Tagged Address ABI when called from from a kernel thread (asynchronous I/O): the kthread does not have the TIF flags of the mm owner, so untag the user address unconditionally. - KVM compute_layout() called before the alternatives code patching. - Minor clean-ups. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: entry: refine comment of stack overflow check arm64: ftrace: fix ifdeffery arm64: KVM: Invoke compute_layout() before alternatives are applied arm64: Validate tagged addresses in access_ok() called from kernel threads arm64: mm: Fix column alignment for UXN in kernel_page_tables arm64: insn: consistently handle exit text arm64: mm: Fix initialisation of DMA zones on non-NUMA systems

arm64: KVM: Invoke compute_layout() before alternatives are applied

2019-12-06T12:14:45Z

compute_layout() is invoked as part of an alternative fixup under stop_machine(). This function invokes get_random_long() which acquires a sleeping lock on -RT which can not be acquired in this context. Rename compute_layout() to kvm_compute_layout() and invoke it before stop_machine() applies the alternatives. Add a __init prefix to kvm_compute_layout() because the caller has it, too (and so the code can be discarded after boot). Reviewed-by: James Morse Acked-by: Marc Zyngier Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Catalin Marinas

Merge tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk

2019-11-26T03:40:40Z

Pull printk updates from Petr Mladek: - Allow to print symbolic error names via new %pe modifier. - Use pr_warn() instead of the remaining pr_warning() calls. Fix formatting of the related lines. - Add VSPRINTF entry to MAINTAINERS. * tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits) checkpatch: don't warn about new vsprintf pointer extension '%pe' MAINTAINERS: Add VSPRINTF tools lib api: Renaming pr_warning to pr_warn ASoC: samsung: Use pr_warn instead of pr_warning lib: cpu_rmap: Use pr_warn instead of pr_warning trace: Use pr_warn instead of pr_warning dma-debug: Use pr_warn instead of pr_warning vgacon: Use pr_warn instead of pr_warning fs: afs: Use pr_warn instead of pr_warning sh/intc: Use pr_warn instead of pr_warning scsi: Use pr_warn instead of pr_warning platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning platform/x86: asus-laptop: Use pr_warn instead of pr_warning platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning oprofile: Use pr_warn instead of pr_warning of: Use pr_warn instead of pr_warning macintosh: Use pr_warn instead of pr_warning idsn: Use pr_warn instead of pr_warning ide: Use pr_warn instead of pr_warning crypto: n2: Use pr_warn instead of pr_warning ...

arm64: Use pr_warn instead of pr_warning

2019-10-18T08:28:33Z

As said in commit f2c2cbcc35d4 ("powerpc: Use pr_warn instead of pr_warning"), removing pr_warning so all logging messages use a consistent _warn style. Let's do it. Link: http://lkml.kernel.org/r/20191018031850.48498-2-wangkefeng.wang@huawei.com To: linux-kernel@vger.kernel.org Cc: Mark Rutland Cc: Catalin Marinas Signed-off-by: Kefeng Wang Acked-by: Will Deacon Reviewed-by: Sergey Senozhatsky Signed-off-by: Petr Mladek

arm64: smp: Treat unknown boot failures as being 'stuck in kernel'

2019-08-27T16:37:05Z

When we fail to bring a secondary CPU online and it fails in an unknown state, we should assume the worst and increment 'cpus_stuck_in_kernel' so that things like kexec() are disabled. Reviewed-by: Mark Rutland Signed-off-by: Will Deacon

arm64: smp: Don't enter kernel with NULL stack pointer or task struct

2019-08-27T16:37:02Z

Although SMP bringup is inherently racy, we can significantly reduce the window during which secondary CPUs can unexpectedly enter the kernel by sanity checking the 'stack' and 'task' fields of the 'secondary_data' structure. If the booting CPU gave up waiting for us, then they will have been cleared to NULL and we should spin in a WFE; WFI loop instead. Reviewed-by: Mark Rutland Signed-off-by: Will Deacon

arm64: smp: Increase secondary CPU boot timeout value

2019-08-27T16:36:50Z

When many debug options are enabled simultaneously (e.g. PROVE_LOCKING, KMEMLEAK, DEBUG_PAGE_ALLOC, KASAN etc), it is possible for us to timeout when attempting to boot a secondary CPU and give up. Unfortunately, the CPU will /eventually/ appear, and sit in the background happily stuck in a recursive exception due to a NULL stack pointer. Increase the timeout to 5s, which will of course be enough for anybody. Reviewed-by: Mark Rutland Signed-off-by: Will Deacon

arm64: smp: Mark expected switch fall-through

2019-07-29T10:59:30Z

When fall-through warnings was enabled by default the following warning was starting to show up: In file included from ../include/linux/kernel.h:15, from ../include/linux/list.h:9, from ../include/linux/kobject.h:19, from ../include/linux/of.h:17, from ../include/linux/irqdomain.h:35, from ../include/linux/acpi.h:13, from ../arch/arm64/kernel/smp.c:9: ../arch/arm64/kernel/smp.c: In function ‘__cpu_up’: ../include/linux/printk.h:302:2: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../arch/arm64/kernel/smp.c:156:4: note: in expansion of macro ‘pr_crit’ pr_crit("CPU%u: may not have shut down cleanly\n", cpu); ^~~~~~~ ../arch/arm64/kernel/smp.c:157:3: note: here case CPU_STUCK_IN_KERNEL: ^~~~ Rework so that the compiler doesn't warn about fall-through. Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning") Signed-off-by: Anders Roxell Signed-off-by: Will Deacon