kernel.git/arch/arm64/kernel/asm-offsets.c, branch linux-4.7.y

arm64: kernel: Save and restore UAO and addr_limit on exception entry

2016-07-07T14:55:37Z

If we take an exception while at EL1, the exception handler inherits the original context's addr_limit and PSTATE.UAO values. To be consistent always reset addr_limit and PSTATE.UAO on (re-)entry to EL1. This prevents accidental re-use of the original context's addr_limit. Based on a similar patch for arm from Russell King. Cc: # 4.6- Acked-by: Will Deacon Reviewed-by: Mark Rutland Signed-off-by: James Morse Signed-off-by: Will Deacon

arm64: kernel: Add support for hibernate/suspend-to-disk

2016-04-28T12:36:22Z

Add support for hibernate/suspend-to-disk. Suspend borrows code from cpu_suspend() to write cpu state onto the stack, before calling swsusp_save() to save the memory image. Restore creates a set of temporary page tables, covering only the linear map, copies the restore code to a 'safe' page, then uses the copy to restore the memory image. The copied code executes in the lower half of the address space, and once complete, restores the original kernel's page tables. It then calls into cpu_resume(), and follows the normal cpu_suspend() path back into the suspend code. To restore a kernel using KASLR, the address of the page tables, and cpu_resume() are stored in the hibernate arch-header and the el2 vectors are pivotted via the 'safe' page in low memory. Reviewed-by: Catalin Marinas Tested-by: Kevin Hilman # Tested on Juno R2 Signed-off-by: James Morse Signed-off-by: Will Deacon

arm64: Change cpu_resume() to enable mmu early then access sleep_sp by va

2016-04-28T11:05:46Z

By enabling the MMU early in cpu_resume(), the sleep_save_sp and stack can be accessed by VA, which avoids the need to convert-addresses and clean to PoC on the suspend path. MMU setup is shared with the boot path, meaning the swapper_pg_dir is restored directly: ttbr1_el1 is no longer saved/restored. struct sleep_save_sp is removed, replacing it with a single array of pointers. cpu_do_{suspend,resume} could be further reduced to not restore: cpacr_el1, mdscr_el1, tcr_el1, vbar_el1 and sctlr_el1, all of which are set by __cpu_setup(). However these values all contain res0 bits that may be used to enable future features. Signed-off-by: James Morse Reviewed-by: Lorenzo Pieralisi Reviewed-by: Catalin Marinas Signed-off-by: Will Deacon

arm64: kernel: Rework finisher callback out of __cpu_suspend_enter()

2016-04-28T11:05:46Z

Hibernate could make use of the cpu_suspend() code to save/restore cpu state, however it needs to be able to return '0' from the 'finisher'. Rework cpu_suspend() so that the finisher is called from C code, independently from the save/restore of cpu state. Space to save the context in is allocated in the caller's stack frame, and passed into __cpu_suspend_enter(). Hibernate's use of this API will look like a copy of the cpu_suspend() function. Signed-off-by: James Morse Acked-by: Lorenzo Pieralisi Reviewed-by: Catalin Marinas Signed-off-by: Will Deacon

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

2016-03-18T03:03:47Z

Pull arm64 updates from Catalin Marinas: "Here are the main arm64 updates for 4.6. There are some relatively intrusive changes to support KASLR, the reworking of the kernel virtual memory layout and initial page table creation. Summary: - Initial page table creation reworked to avoid breaking large block mappings (huge pages) into smaller ones. The ARM architecture requires break-before-make in such cases to avoid TLB conflicts but that's not always possible on live page tables - Kernel virtual memory layout: the kernel image is no longer linked to the bottom of the linear mapping (PAGE_OFFSET) but at the bottom of the vmalloc space, allowing the kernel to be loaded (nearly) anywhere in physical RAM - Kernel ASLR: position independent kernel Image and modules being randomly mapped in the vmalloc space with the randomness is provided by UEFI (efi_get_random_bytes() patches merged via the arm64 tree, acked by Matt Fleming) - Implement relative exception tables for arm64, required by KASLR (initial code for ARCH_HAS_RELATIVE_EXTABLE added to lib/extable.c but actual x86 conversion to deferred to 4.7 because of the merge dependencies) - Support for the User Access Override feature of ARMv8.2: this allows uaccess functions (get_user etc.) to be implemented using LDTR/STTR instructions. Such instructions, when run by the kernel, perform unprivileged accesses adding an extra level of protection. The set_fs() macro is used to "upgrade" such instruction to privileged accesses via the UAO bit - Half-precision floating point support (part of ARMv8.2) - Optimisations for CPUs with or without a hardware prefetcher (using run-time code patching) - copy_page performance improvement to deal with 128 bytes at a time - Sanity checks on the CPU capabilities (via CPUID) to prevent incompatible secondary CPUs from being brought up (e.g. weird big.LITTLE configurations) - valid_user_regs() reworked for better sanity check of the sigcontext information (restored pstate information) - ACPI parking protocol implementation - CONFIG_DEBUG_RODATA enabled by default - VDSO code marked as read-only - DEBUG_PAGEALLOC support - ARCH_HAS_UBSAN_SANITIZE_ALL enabled - Erratum workaround Cavium ThunderX SoC - set_pte_at() fix for PROT_NONE mappings - Code clean-ups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (99 commits) arm64: kasan: Fix zero shadow mapping overriding kernel image shadow arm64: kasan: Use actual memory node when populating the kernel image shadow arm64: Update PTE_RDONLY in set_pte_at() for PROT_NONE permission arm64: Fix misspellings in comments. arm64: efi: add missing frame pointer assignment arm64: make mrs_s prefixing implicit in read_cpuid arm64: enable CONFIG_DEBUG_RODATA by default arm64: Rework valid_user_regs arm64: mm: check at build time that PAGE_OFFSET divides the VA space evenly arm64: KVM: Move kvm_call_hyp back to its original localtion arm64: mm: treat memstart_addr as a signed quantity arm64: mm: list kernel sections in order arm64: lse: deal with clobbered IP registers after branch via PLT arm64: mm: dump: Use VA_START directly instead of private LOWEST_ADDR arm64: kconfig: add submenu for 8.2 architectural features arm64: kernel: acpi: fix ioremap in ACPI parking protocol cpu_postboot arm64: Add support for Half precision floating point arm64: Remove fixmap include fragility arm64: Add workaround for Cavium erratum 27456 arm64: mm: Mark .rodata as RO ...

arm64: KVM: Move most of the fault decoding to C

2016-02-29T18:34:18Z

The fault decoding process (including computing the IPA in the case of a permission fault) would be much better done in C code, as we have a reasonable infrastructure to deal with the VHE/non-VHE differences. Let's move the whole thing to C, including the workaround for erratum 834220, and just patch the odd ESR_EL2 access remaining in hyp-entry.S. Reviewed-by: Christoffer Dall Acked-by: Catalin Marinas Signed-off-by: Marc Zyngier

arm64: Handle early CPU boot failures

2016-02-25T10:32:23Z

A secondary CPU could fail to come online due to insufficient capabilities and could simply die or loop in the kernel. e.g, a CPU with no support for the selected kernel PAGE_SIZE loops in kernel with MMU turned off. or a hotplugged CPU which doesn't have one of the advertised system capability will die during the activation. There is no way to synchronise the status of the failing CPU back to the master. This patch solves the issue by adding a field to the secondary_data which can be updated by the failing CPU. If the secondary CPU fails even before turning the MMU on, it updates the status in a special variable reserved in the head.txt section to make sure that the update can be cache invalidated safely without possible sharing of cache write back granule. Here are the possible states : -1. CPU_MMU_OFF - Initial value set by the master CPU, this value indicates that the CPU could not turn the MMU on, hence the status could not be reliably updated in the secondary_data. Instead, the CPU has updated the status @ __early_cpu_boot_status. 0. CPU_BOOT_SUCCESS - CPU has booted successfully. 1. CPU_KILL_ME - CPU has invoked cpu_ops->die, indicating the master CPU to synchronise by issuing a cpu_ops->cpu_kill. 2. CPU_STUCK_IN_KERNEL - CPU couldn't invoke die(), instead is looping in the kernel. This information could be used by say, kexec to check if it is really safe to do a kexec reboot. 3. CPU_PANIC_KERNEL - CPU detected some serious issues which requires kernel to crash immediately. The secondary CPU cannot call panic() until it has initialised the GIC. This flag can be used to instruct the master to do so. Cc: Mark Rutland Acked-by: Will Deacon Signed-off-by: Suzuki K Poulose [catalin.marinas@arm.com: conflict resolution] [catalin.marinas@arm.com: converted "status" from int to long] [catalin.marinas@arm.com: updated update_early_cpu_boot_status to use str_l] Signed-off-by: Catalin Marinas

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2016-01-12T21:22:12Z

Pull KVM updates from Paolo Bonzini: "PPC changes will come next week. - s390: Support for runtime instrumentation within guests, support of 248 VCPUs. - ARM: rewrite of the arm64 world switch in C, support for 16-bit VM identifiers. Performance counter virtualization missed the boat. - x86: Support for more Hyper-V features (synthetic interrupt controller), MMU cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (115 commits) kvm: x86: Fix vmwrite to SECONDARY_VM_EXEC_CONTROL kvm/x86: Hyper-V SynIC timers tracepoints kvm/x86: Hyper-V SynIC tracepoints kvm/x86: Update SynIC timers on guest entry only kvm/x86: Skip SynIC vector check for QEMU side kvm/x86: Hyper-V fix SynIC timer disabling condition kvm/x86: Reorg stimer_expiration() to better control timer restart kvm/x86: Hyper-V unify stimer_start() and stimer_restart() kvm/x86: Drop stimer_stop() function kvm/x86: Hyper-V timers fix incorrect logical operation KVM: move architecture-dependent requests to arch/ KVM: renumber vcpu->request bits KVM: document which architecture uses each request bit KVM: Remove unused KVM_REQ_KICK to save a bit in vcpu->requests kvm: x86: Check kvm_write_guest return value in kvm_write_wall_clock KVM: s390: implement the RI support of guest kvm/s390: drop unpaired smp_mb kvm: x86: fix comment about {mmu,nested_mmu}.gva_to_gpa KVM: x86: MMU: Use clear_page() instead of init_shadow_page_table() arm/arm64: KVM: Detect vGIC presence at runtime ...

ARM: 8480/2: arm64: add implementation for arm-smccc

2016-01-04T16:24:45Z

Adds implementation for arm-smccc and enables CONFIG_HAVE_SMCCC. Acked-by: Will Deacon Signed-off-by: Jens Wiklander Signed-off-by: Russell King

arm64: KVM: Cleanup asm-offset.c

2015-12-14T11:30:43Z

As we've now rewritten most of our code-base in C, most of the KVM-specific code in asm-offset.c is useless. Delete-time again! Signed-off-by: Marc Zyngier Acked-by: Christoffer Dall