kernel.git/arch/arm64/include/asm/pgtable.h, branch linux-3.19.y

arm64: mm: Add pgd_page to support RCU fast_gup

2014-12-23T16:39:17Z

This patch adds pgd_page definition in order to keep supporting HAVE_GENERIC_RCU_GUP configuration. In addition, it changes pud_page expression to align with pmd_page for readability. An introduction of pgd_page resolves the following build breakage under 4KB + 4Level memory management combo. mm/gup.c: In function 'gup_huge_pgd': mm/gup.c:889:2: error: implicit declaration of function 'pgd_page' [-Werror=implicit-function-declaration] head = pgd_page(orig); ^ mm/gup.c:889:7: warning: assignment makes pointer from integer without a cast head = pgd_page(orig); Cc: Will Deacon Cc: Steve Capper Signed-off-by: Jungseok Lee [catalin.marinas@arm.com: remove duplicate pmd_page definition] Signed-off-by: Catalin Marinas

mm: fix huge zero page accounting in smaps report

2014-12-11T01:41:08Z

As a small zero page, huge zero page should not be accounted in smaps report as normal page. For small pages we rely on vm_normal_page() to filter out zero page, but vm_normal_page() is not designed to handle pmds. We only get here due hackish cast pmd to pte in smaps_pte_range() -- pte and pmd format is not necessary compatible on each and every architecture. Let's add separate codepath to handle pmds. follow_trans_huge_pmd() will detect huge zero page for us. We would need pmd_dirty() helper to do this properly. The patch adds it to THP-enabled architectures which don't yet have one. [akpm@linux-foundation.org: use do_div to fix 32-bit build] Signed-off-by: "Kirill A. Shutemov" Reported-by: Fengguang Wu Tested-by: Fengwei Yin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'kvm-arm-for-3.18-take-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm

2014-10-18T21:32:31Z

Pull second batch of changes for KVM/{arm,arm64} from Marc Zyngier: "The most obvious thing is the sizeable MMU changes to support 48bit VAs on arm64. Summary: - support for 48bit IPA and VA (EL2) - a number of fixes for devices mapped into guests - yet another VGIC fix for BE - a fix for CPU hotplug - a few compile fixes (disabled VGIC, strict mm checks)" [ I'm pulling directly from Marc at the request of Paolo Bonzini, whose backpack was stolen at Düsseldorf airport and will do new keys and rebuild his web of trust. - Linus ] * tag 'kvm-arm-for-3.18-take-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm: arm/arm64: KVM: Fix BE accesses to GICv2 EISR and ELRSR regs arm: kvm: STRICT_MM_TYPECHECKS fix for user_mem_abort arm/arm64: KVM: Ensure memslots are within KVM_PHYS_SIZE arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2 arm/arm64: KVM: map MMIO regions at creation time arm64: kvm: define PAGE_S2_DEVICE as read-only by default ARM: kvm: define PAGE_S2_DEVICE as read-only by default arm/arm64: KVM: add 'writable' parameter to kvm_phys_addr_ioremap arm/arm64: KVM: fix potential NULL dereference in user_mem_abort() arm/arm64: KVM: use __GFP_ZERO not memset() to get zeroed pages ARM: KVM: fix vgic-disabled build arm: kvm: fix CPU hotplug

arm64: kvm: define PAGE_S2_DEVICE as read-only by default

2014-10-10T11:07:38Z

Now that we support read-only memslots, we need to make sure that pass-through device mappings are not mapped writable if the guest has requested them to be read-only. The existing implementation already honours this by calling kvm_set_s2pte_writable() on the new pte in case of writable mappings, so all we need to do is define the default pgprot_t value used for devices to be PTE_S2_RDONLY. Acked-by: Marc Zyngier Signed-off-by: Ard Biesheuvel Signed-off-by: Christoffer Dall

Merge branch 'akpm' (fixes from Andrew Morton)

2014-10-10T02:26:14Z

Merge patch-bomb from Andrew Morton: - part of OCFS2 (review is laggy again) - procfs - slab - all of MM - zram, zbud - various other random things: arch, filesystems. * emailed patches from Andrew Morton : (164 commits) nosave: consolidate __nosave_{begin,end} in include/linux/screen_info.h: remove unused ORIG_* macros kernel/sys.c: compat sysinfo syscall: fix undefined behavior kernel/sys.c: whitespace fixes acct: eliminate compile warning kernel/async.c: switch to pr_foo() include/linux/blkdev.h: use NULL instead of zero include/linux/kernel.h: deduplicate code implementing clamp* macros include/linux/kernel.h: rewrite min3, max3 and clamp using min and max alpha: use Kbuild logic to include frv: remove deprecated IRQF_DISABLED frv: remove unused cpuinfo_frv and friends to fix future build error zbud: avoid accessing last unused freelist zsmalloc: simplify init_zspage free obj linking mm/zsmalloc.c: correct comment for fullness group computation zram: use notify_free to account all free notifications zram: report maximum used memory zram: zram memory size limitation zsmalloc: change return value unit of zs_get_total_size_bytes zsmalloc: move pages_allocated to zs_pool ...

arm64: mm: enable RCU fast_gup

2014-10-10T02:26:01Z

Activate the RCU fast_gup for ARM64. We also need to force THP splits to broadcast an IPI s.t. we block in the fast_gup page walker. As THP splits are comparatively rare, this should not lead to a noticeable performance degradation. Some pre-requisite functions pud_write and pud_page are also added. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Steve Capper Tested-by: Dann Frazier Acked-by: Catalin Marinas Cc: Hugh Dickins Cc: Russell King Cc: Mark Rutland Cc: Mel Gorman Cc: Will Deacon Cc: Christoffer Dall Cc: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2014-10-09T19:03:49Z

Pull PCI updates from Bjorn Helgaas: "The interesting things here are: - Turn on Config Request Retry Status Software Visibility. This caused hangs last time, but we included a fix this time. - Rework PCI device configuration to use _HPP/_HPX more aggressively - Allow PCI devices to be put into D3cold during system suspend - Add arm64 PCI support - Add APM X-Gene host bridge driver - Add TI Keystone host bridge driver - Add Xilinx AXI host bridge driver More detailed summary: Enumeration - Check Vendor ID only for Config Request Retry Status (Rajat Jain) - Enable Config Request Retry Status when supported (Rajat Jain) - Add generic domain handling (Catalin Marinas) - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado) Resource management - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu) - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr) PCI device hotplug - Prevent NULL dereference during pciehp probe (Andreas Noever) - Move _HPP & _HPX handling into core (Bjorn Helgaas) - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas) - Apply _HPP/_HPX to display devices (Bjorn Helgaas) - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas) - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas) - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas) - Fix wait time in pciehp timeout message (Yinghai Lu) - Add more pciehp Slot Control debug output (Yinghai Lu) - Stop disabling pciehp notifications during init (Yinghai Lu) MSI - Remove arch_msi_check_device() (Alexander Gordeev) - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev) - Move D0 check into pci_msi_check_device() (Alexander Gordeev) - Remove unused kobject from struct msi_desc (Yijing Wang) - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang) - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang) - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang) - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang) - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang) Power management - Drop unused runtime PM support code for PCIe ports (Rafael J. Wysocki) - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki) AER - Add additional AER error strings (Gong Chen) - Make standalone includable (Thierry Reding) Virtualization - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson) - Add ACS quirk for Intel 10G NICs (Alex Williamson) - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp) - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson) - Add device flag helpers (Ethan Zhao) - Assume all Mellanox devices have broken INTx masking (Gavin Shan) Generic host bridge driver - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau) - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau) - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau) - Fix the conversion of IO ranges into IO resources (Liviu Dudau) - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau) - Add support for parsing PCI host bridge resources from DT (Liviu Dudau) - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau) - Add arm64 architectural support for PCI (Liviu Dudau) APM X-Gene - Add APM X-Gene PCIe driver (Tanmay Inamdar) - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar) Freescale i.MX6 - Probe in module_init(), not fs_initcall() (Lucas Stach) - Delay enabling reference clock for SS until it stabilizes (Tim Harvey) Marvell MVEBU - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni) NVIDIA Tegra - Make sure the PCIe PLL is really reset (Eric Yuen) - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang) - Fix extended configuration space mapping (Peter Daifuku) - Implement resource hierarchy (Thierry Reding) - Clear CLKREQ# enable on port disable (Thierry Reding) - Add Tegra124 support (Thierry Reding) ST Microelectronics SPEAr13xx - Pass config resource through reg property (Pratyush Anand) Synopsys DesignWare - Use NULL instead of false (Fabio Estevam) - Parse bus-range property from devicetree (Lucas Stach) - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach) - Remove pci_assign_unassigned_resources() (Lucas Stach) - Check private_data validity in single place (Lucas Stach) - Setup and clear exactly one MSI at a time (Lucas Stach) - Remove open-coded bitmap operations (Lucas Stach) - Fix configuration base address when using 'reg' (Minghuan Lian) - Fix IO resource end address calculation (Minghuan Lian) - Rename get_msi_data() to get_msi_addr() (Minghuan Lian) - Add get_msi_data() to pcie_host_ops (Minghuan Lian) - Add support for v3.65 hardware (Murali Karicheri) - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand) TI Keystone - Add TI Keystone PCIe driver (Murali Karicheri) - Limit MRSS for all downstream devices (Murali Karicheri) - Assume controller is already in RC mode (Murali Karicheri) - Set device ID based on SoC to support multiple ports (Murali Karicheri) Xilinx AXI - Add Xilinx AXI PCIe driver (Srikanth Thokala) - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter) Miscellaneous - Clean up whitespace (Quentin Lambert) - Remove assignments from "if" conditions (Quentin Lambert) - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri) - x86: Mark DMI tables as initialization data (Mathias Krause) - x86: Move __init annotation to the correct place (Mathias Krause) - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause) - x86: Constify pci_mmcfg_probes[] array (Mathias Krause) - x86: Mark PCI BIOS initialization code as such (Mathias Krause) - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya) - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)" * tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (109 commits) arm64: dts: Add APM X-Gene PCIe device tree nodes PCI: Add ACS quirk for AMD A88X southbridge devices PCI: xgene: Add APM X-Gene PCIe driver PCI: designware: Remove open-coded bitmap operations PCI/MSI: Remove unnecessary temporary variable PCI/MSI: Use __write_msi_msg() instead of write_msi_msg() MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg() PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg() PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib PCI/MSI: Remove unused kobject from struct msi_desc PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported() PCI/MSI: Move D0 check into pci_msi_check_device() PCI/MSI: Remove arch_msi_check_device() irqchip: armada-370-xp: Remove arch_msi_check_device() PCI/MSI/PPC: Remove arch_msi_check_device() arm64: Add architectural support for PCI PCI: Add pci_remap_iospace() to map bus I/O resources of/pci: Add support for parsing PCI host bridge resources from DT of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr() ... Conflicts: arch/arm64/boot/dts/apm-storm.dtsi

arm64: Add architectural support for PCI

2014-09-30T23:08:57Z

Use the generic PCI domain and OF functions to provide support for PCI on arm64. [bhelgaas: Change comments to use generic PCI, not just PCIe. Nothing at this level is PCIe-specific.] Signed-off-by: Liviu Dudau Signed-off-by: Bjorn Helgaas Acked-by: Catalin Marinas

arm64: Introduce {set,clear}_pte_bit

2014-09-08T13:39:18Z

It's useful to be able to change individual bits in ptes at times. Introduce functions for this and update existing pte_mk* functions to use these primatives. Acked-by: Will Deacon Signed-off-by: Laura Abbott [will: added missing inline keyword for new header functions] Signed-off-by: Will Deacon

arm64: Fix barriers used for page table modifications

2014-07-24T09:25:42Z

The architecture specification states that both DSB and ISB are required between page table modifications and subsequent memory accesses using the corresponding virtual address. When TLB invalidation takes place, the tlb_flush_* functions already have the necessary barriers. However, there are other functions like create_mapping() for which this is not the case. The patch adds the DSB+ISB instructions in the set_pte() function for valid kernel mappings. The invalid pte case is handled by tlb_flush_* and the user mappings in general have a corresponding update_mmu_cache() call containing a DSB. Even when update_mmu_cache() isn't called, the kernel can still cope with an unlikely spurious page fault by re-executing the instruction. In addition, the set_pmd, set_pud() functions gain an ISB for architecture compliance when block mappings are created. Signed-off-by: Catalin Marinas Reported-by: Leif Lindholm Acked-by: Steve Capper Cc: Will Deacon Cc: