kernel.git/arch/arm64/configs, branch linux-5.10.y

arm64: defconfig: build imx-sdma as a module

2022-04-08T12:40:34Z

[ Upstream commit e95622289f263662240544a9f0009b25c19e64d4 ] This avoids firmware load error and sysfs fallback reported as follows: [ 0.199448] imx-sdma 302c0000.dma-controller: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2 [ 0.199487] imx-sdma 302c0000.dma-controller: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin Signed-off-by: Marcel Ziswiler Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

arm64: defconfig: Build in CONFIG_GPIO_MXC by default

2020-10-26T07:48:58Z

i.MX SoC GPIO driver provides the basic functions of GPIO pin operations and IRQ operations, it is now changed from "def_bool y" to "tristate", so it should be explicitly enabled to make sure all consumers work normally. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo

Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-10-24T17:53:04Z

Pull ARM SoC defconfig updates from Olof Johansson: "We keep this in a separate branch to avoid cross-branch conflicts, but most of the material here is fairly boring -- some new drivers turned on for hardware since they were merged, and some refreshed files due to time having moved a lot of entries around" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (33 commits) ARM: multi_v7_defconfig: add FMC2 EBI controller support arm64: defconfig: enable Qualcomm ASoC modules arm64: defconfig: qcom: enable GPU clock controller for SM8[12]50 arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets arm64: defconfig: enable the sl28cpld board management controller arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers arm64: defconfig: Enable Qcom SNPS Femto PHY ARM: configs: Update Realview defconfig ARM: configs: Update Versatile defconfig ARM: config: aspeed_g5: Enable IBM OP Panel driver ARM: config: aspeed-g5: Enable I2C GPIO mux driver ARM: config: aspeed: Fix selection of media drivers arm64: defconfig: Enable Samsung S3FWRN5 NFC driver ARM: omap2plus_defconfig: enable generic net options ARM: omap2plus_defconfig: enable twl4030_madc as a loadable module arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC arm64: defconfig: Build ADMA and ACONNECT driver arm64: defconfig: Build AHUB component drivers arm64: defconfig: Enable Lontium LT9611 driver arm64: defcondfig: Enable USB ACM and FTDI drivers ...

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-10-24T17:44:18Z

Pull ARM Devicetree updates from Olof Johansson: "As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits) ARM: dts: nspire: Fix SP804 users arm64: dts: lg: Fix SP804 users arm64: dts: lg: Fix SP805 clocks ARM: mstar: Fix up the fallout from moving the dts/dtsi files ARM: mstar: Add mstar prefix to all of the dtsi/dts files ARM: mstar: Add interrupt to pm_uart ARM: mstar: Add interrupt controller to base dtsi ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml ...

Merge tag 'qcom-arm64-defconfig-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig

2020-10-03T20:19:47Z

Qualcomm ARM64defconfig updates for v5.10 Enable Qualcomm related drivers for Lontium LT9611 HDMI bridge, SNPS high-speed USB PHY, various Interconnect providers, GPU clock controllers for SM8150 and SM8250 and audio driver for MSM8996 and APQ8016. Then enable ACM and FTDI host drivers, which are useful when working with various development boards using ARM64 hosts. * tag 'qcom-arm64-defconfig-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: enable Qualcomm ASoC modules arm64: defconfig: qcom: enable GPU clock controller for SM8[12]50 arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets arm64: defconfig: Enable Qcom SNPS Femto PHY arm64: defconfig: Enable Lontium LT9611 driver arm64: defcondfig: Enable USB ACM and FTDI drivers Link: https://lore.kernel.org/r/20200924040708.180352-1-bjorn.andersson@linaro.org Signed-off-by: Olof Johansson

Merge tag 'imx-defconfig-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig

2020-10-03T20:18:19Z

i.MX defconfig update for 5.10: - Enable i.MX6SLL, i.MX7ULP SoC and CAAM crypto driver support in multi_v7_defconfig. - Enable the eLCDIF and Raydium RM67191 driver in arm64 defconfig to support MIPI DSI on imx8mq-evk. - Enable NWL DSI host controller, dphy and SITRONIX ST7703 panel driver in arm64 defconfig to support display on imx8mq-librem5-devkit. - Enable sl28cpld board management controller driver support in arm64 defconfig. - Enable i.MX8M SoCs support in imx_v6_v7_defconfig as they can run in AArch32 mode. * tag 'imx-defconfig-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: defconfig: enable the sl28cpld board management controller arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers arm64: defconfig: Enable imx8mq-librem5-devkit display stack arm64: defconfig: re-sync DRM related defconfig bits ARM: imx_v6_v7_defconfig: Support i.MX8MN/P/Q ARM: multi_v7_defconfig: Enable i.MX7ULP SoC ARM: multi_v7_defconfig: Enable i.MX6SLL SoC ARM: multi_v7_defconfig: enable caam crypto module Link: https://lore.kernel.org/r/20200923073009.23678-6-shawnguo@kernel.org Signed-off-by: Olof Johansson

Merge tag 'samsung-defconfig-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig

2020-09-26T19:44:11Z

Samsung defconfig changes for v5.10 1. Re-enable platform media drivers as new dependency on MEDIA_PLATFORM_SUPPORT appeared. 2. Enable ROHM BD718x7 PMIC present on some of boards with i.MX 8 SoCs. 3. Enable Samsung S3FWRN5 NFC driver present on TM2/TM2E boards. * tag 'samsung-defconfig-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: defconfig: Enable Samsung S3FWRN5 NFC driver arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC ARM: exynos_defconfig: enable platform media drivers Link: https://lore.kernel.org/r/20200920160705.9651-2-krzk@kernel.org Signed-off-by: Olof Johansson

Merge tag 'tegra-for-5.10-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig

2020-09-26T19:43:29Z

arm64: tegra: Default configuration updates for v5.10-rc1 This pair of patches enable the ADMA, ACONNECT and AHUB drivers that are required for audio support on Tegra210 and later. * tag 'tegra-for-5.10-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: defconfig: Build ADMA and ACONNECT driver arm64: defconfig: Build AHUB component drivers Link: https://lore.kernel.org/r/20200918150303.3938852-6-thierry.reding@gmail.com Signed-off-by: Olof Johansson

arm64: defconfig: enable Qualcomm ASoC modules

2020-09-24T03:04:52Z

Enable CONFIG_SND_SOC_QCOM and several platform drivers to be built as modules. Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20200917203913.3250205-3-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson

arm64: defconfig: qcom: enable GPU clock controller for SM8[12]50

2020-09-24T03:04:33Z

Enable GPU Clock Controller for SM8150 and SM8250 to allow using Adreon GPU on these SoCs. Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20200917203913.3250205-2-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson