<feed xmlns='http://www.w3.org/2005/Atom'>
<title>kernel.git/arch/arm64/boot, branch linux-4.13.y</title>
<subtitle>Hosts the 0x221E linux distro kernel.
</subtitle>
<id>https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-4.13.y</id>
<link rel='self' href='https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-4.13.y'/>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/'/>
<updated>2017-10-27T08:39:15Z</updated>
<entry>
<title>arm64: dts: rockchip: correct vqmmc voltage for rk3399 platforms</title>
<updated>2017-10-27T08:39:15Z</updated>
<author>
<name>Shawn Lin</name>
</author>
<published>2017-10-17T03:38:04Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=1aacf045279a55f7d2b2ab72e19925e8ca4c596b'/>
<id>urn:sha1:1aacf045279a55f7d2b2ab72e19925e8ca4c596b</id>
<content type='text'>
commit b31ce3041787b61f2dad39d2dcda5c4a81d10e2b upstream.

The vcc_sd or vcc_sdio used for IO voltage for sdmmc and sdio
interface on rk3399 platform have a limitation that it can't be
larger than 3.0v, otherwise it has a potential risk for the chip.
Correct all of them.

Fixes: 171582e00db1 ("arm64: dts: rockchip: add support for firefly-rk3399 board")
Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Fixes: 8164a84cca12 ("arm64: dts: rockchip: Add support for rk3399 sapphire SOM")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Lin &lt;shawn.lin@rock-chips.com&gt;
Tested-by: Klaus Goger &lt;klaus.goger@theobroma-systems.com&gt;
Signed-off-by: Heiko Stuebner &lt;heiko@sntech.de&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
</entry>
<entry>
<title>arm64: dt marvell: Fix AP806 system controller size</title>
<updated>2017-10-12T09:56:16Z</updated>
<author>
<name>Baruch Siach</name>
</author>
<published>2017-09-15T07:50:07Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=a075264bbafe43bda0f9ffcacf3f1b2fadae2226'/>
<id>urn:sha1:a075264bbafe43bda0f9ffcacf3f1b2fadae2226</id>
<content type='text'>
commit 9e7460fc325dad06d2066abdbc1f4dd49456f9a4 upstream.

Extend the container size to 0x2000 to include the gpio controller at
offset 0x1040.

While at it, add start address notation to the gpio node name to match
its 'offset' property.

Fixes: 63dac0f4924b ("arm64: dts: marvell: add gpio support for Armada
7K/8K")
Signed-off-by: Baruch Siach &lt;baruch@tkos.co.il&gt;
Signed-off-by: Gregory CLEMENT &lt;gregory.clement@free-electrons.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
</entry>
<entry>
<title>ARM64: dts: marvell: armada-37xx: Fix GIC maintenance interrupt</title>
<updated>2017-09-13T21:20:54Z</updated>
<author>
<name>Marc Zyngier</name>
</author>
<published>2017-07-01T14:16:34Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=2f6eba3f72f008766a42a5fe0719f0c8385e337c'/>
<id>urn:sha1:2f6eba3f72f008766a42a5fe0719f0c8385e337c</id>
<content type='text'>
commit 95696d292e204073433ed2ef3ff4d3d8f42a8248 upstream.

The GIC-500 integrated in the Armada-37xx SoCs is compliant with
the GICv3 architecture, and thus provides a maintenance interrupt
that is required for hypervisors to function correctly.

With the interrupt provided in the DT, KVM now works as it should.
Tested on an Espressobin system.

Fixes: adbc3695d9e4 ("arm64: dts: add the Marvell Armada 3700 family and a development board")
Signed-off-by: Marc Zyngier &lt;marc.zyngier@arm.com&gt;
Signed-off-by: Gregory CLEMENT &lt;gregory.clement@free-electrons.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
</entry>
<entry>
<title>Merge tag 'mvebu-fixes-4.13-3' of git://git.infradead.org/linux-mvebu into fixes</title>
<updated>2017-09-01T23:37:02Z</updated>
<author>
<name>Olof Johansson</name>
</author>
<published>2017-09-01T23:37:02Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=6f71a925761e7843965a704eb6682ea337abb4a5'/>
<id>urn:sha1:6f71a925761e7843965a704eb6682ea337abb4a5</id>
<content type='text'>
mvebu fixes for 4.13 (part 3)

Fix number of GPIOs in AP806 description for Armada 7K/8K

* tag 'mvebu-fixes-4.13-3' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: fix number of GPIOs in Armada AP806 description

Signed-off-by: Olof Johansson &lt;olof@lixom.net&gt;
</content>
</entry>
<entry>
<title>arm64: dts: marvell: fix number of GPIOs in Armada AP806 description</title>
<updated>2017-08-30T13:50:13Z</updated>
<author>
<name>Thomas Petazzoni</name>
</author>
<published>2017-08-30T10:15:37Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=a0ac89b57207ccc87d76f4e6aa9a83026743861b'/>
<id>urn:sha1:a0ac89b57207ccc87d76f4e6aa9a83026743861b</id>
<content type='text'>
The Armada AP806 has 20 pins, and therefore 20 GPIOs (from 0 to 19
included) and not 19 pins. Therefore, we fix the Device Tree
description for the GPIO controller.

Before this patch:

$ cat /sys/kernel/debug/pinctrl/f06f4000.system-controller:pinctrl/gpio-ranges
GPIO ranges handled:
0: mvebu-gpio GPIOS [0 - 19] PINS [0 - 19]
0: f06f4000.system-controller:gpio GPIOS [0 - 18] PINS [0 - 18]

After this patch:

$ cat /sys/kernel/debug/pinctrl/f06f4000.system-controller:pinctrl/gpio-ranges
GPIO ranges handled:
0: mvebu-gpio GPIOS [0 - 19] PINS [0 - 19]
0: f06f4000.system-controller:gpio GPIOS [0 - 19] PINS [0 - 19]

Fixes: 63dac0f4924b9 ("arm64: dts: marvell: add gpio support for Armada 7K/8K")
Signed-off-by: Thomas Petazzoni &lt;thomas.petazzoni@free-electrons.com&gt;
Signed-off-by: Gregory CLEMENT &lt;gregory.clement@free-electrons.com&gt;
</content>
</entry>
<entry>
<title>Merge tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes</title>
<updated>2017-08-30T05:39:18Z</updated>
<author>
<name>Olof Johansson</name>
</author>
<published>2017-08-30T05:39:18Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=fabed5ad230a5ff8320b2928ec20a52e59a9bf60'/>
<id>urn:sha1:fabed5ad230a5ff8320b2928ec20a52e59a9bf60</id>
<content type='text'>
Allwinner fixes for 4.13, take 3

This is a revert of the EMAC bindings. The discussion has not settled down
yet on a proper representation of the PHY, and therefore we cannot commit
to a binding yet

* tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm: dts: sunxi: Revert EMAC changes
  arm64: dts: allwinner: Revert EMAC changes
  dt-bindings: net: Revert sun8i dwmac binding

Signed-off-by: Olof Johansson &lt;olof@lixom.net&gt;
</content>
</entry>
<entry>
<title>arm64: dts: allwinner: Revert EMAC changes</title>
<updated>2017-08-28T09:11:20Z</updated>
<author>
<name>Maxime Ripard</name>
</author>
<published>2017-08-25T18:36:48Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=87e1f5e8bb4bd584de0a8f3b1e42196dca221d02'/>
<id>urn:sha1:87e1f5e8bb4bd584de0a8f3b1e42196dca221d02</id>
<content type='text'>
Since the discussion is not settled yet for the EMAC, and that the release
in getting really close, let's revert the changes for now, and we'll
reintroduce them later.

Acked-by: Chen-Yu Tsai &lt;wens@csie.org&gt;
Signed-off-by: Maxime Ripard &lt;maxime.ripard@free-electrons.com&gt;
</content>
</entry>
<entry>
<title>Merge tag 'sunxi-fixes-for-4.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes</title>
<updated>2017-08-18T09:55:44Z</updated>
<author>
<name>Arnd Bergmann</name>
</author>
<published>2017-08-18T09:55:44Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=552c497c406e49261e6bee6236dd9a3f8fdd7ab5'/>
<id>urn:sha1:552c497c406e49261e6bee6236dd9a3f8fdd7ab5</id>
<content type='text'>
Pull "Allwinner fixes for 4.13, round 2" from Chen-Yu Tsai:

Three fixes adding a missing alias for the Ethernet controller on A64
boards. One adding a missing interrupt for the pin controller.

* tag 'sunxi-fixes-for-4.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: allwinner: h5: fix pinctrl IRQs
  arm64: allwinner: a64: sopine: add missing ethernet0 alias
  arm64: allwinner: a64: pine64: add missing ethernet0 alias
  arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias
</content>
</entry>
<entry>
<title>Merge tag 'renesas-fixes4-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes</title>
<updated>2017-08-17T09:00:26Z</updated>
<author>
<name>Arnd Bergmann</name>
</author>
<published>2017-08-17T09:00:26Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=872784bffbe4217611922bc0f929dbd9cad65528'/>
<id>urn:sha1:872784bffbe4217611922bc0f929dbd9cad65528</id>
<content type='text'>
Pull "Fourth Round of Renesas ARM Based SoC Fixes for v4.13" from Simon Horman:

* Avoid audio_clkout naming conflict for salvator boards using
  Renesas R-Car Gen 3 SoCs

  Morimoto-san says "The clock name of "audio_clkout" is used by the
  Renesas sound driver.  This duplicated naming breaks its clock
  registering/unregistering.  Especially when unbind/bind it can't handle
  clkout correctly.  This patch renames "audio_clkout" to "audio-clkout" to
  avoid the naming conflict."

* tag 'renesas-fixes4-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: renesas: salvator-common: avoid audio_clkout naming conflict
</content>
</entry>
<entry>
<title>arm64: allwinner: h5: fix pinctrl IRQs</title>
<updated>2017-08-14T06:18:21Z</updated>
<author>
<name>Icenowy Zheng</name>
</author>
<published>2017-08-11T14:27:35Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=d86e63e1f0b7868c55c8d4a54854b85e2bac690b'/>
<id>urn:sha1:d86e63e1f0b7868c55c8d4a54854b85e2bac690b</id>
<content type='text'>
The pin controller of H5 has three IRQs at the chip's GIC, which
represents three banks of pinctrl IRQs. However, the device tree used to
miss the third IRQ of the pin controller, which makes the PG bank IRQ
not usable.

Add the missing IRQ to the pinctrl node.

Fixes: 4e36de179f27 ("arm64: allwinner: h5: add Allwinner H5 .dtsi")
Signed-off-by: Icenowy Zheng &lt;icenowy@aosc.io&gt;
Signed-off-by: Chen-Yu Tsai &lt;wens@csie.org&gt;
</content>
</entry>
</feed>
