kernel.git/arch/arm64/boot/dts/nvidia, branch linux-4.9.y

arm64: tegra: Add power-domain for Tegra210 HDA

2021-03-03T16:44:31Z

commit 1e0ca5467445bc1f41a9e403d6161a22f313dae7 upstream. HDA initialization is failing occasionally on Tegra210 and following print is observed in the boot log. Because of this probe() fails and no sound card is registered. [16.800802] tegra-hda 70030000.hda: no codecs found! Codecs request a state change and enumeration by the controller. In failure cases this does not seem to happen as STATETS register reads 0. The problem seems to be related to the HDA codec dependency on SOR power domain. If it is gated during HDA probe then the failure is observed. Building Tegra HDA driver into kernel image avoids this failure but does not completely address the dependency part. Fix this problem by adding 'power-domains' DT property for Tegra210 HDA. Note that Tegra186 and Tegra194 HDA do this already. Fixes: 742af7e7a0a1 ("arm64: tegra: Add Tegra210 support") Depends-on: 96d1f078ff0 ("arm64: tegra: Add SOR power-domain for Tegra210") Cc: Signed-off-by: Sameer Pujar Acked-by: Jon Hunter Signed-off-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman

arm64: tegra: Fix 'active-low' warning for Jetson TX1 regulator

2019-12-21T09:40:43Z

commit 1e5e929c009559bd7e898ac8e17a5d01037cb057 upstream. Commit 34993594181d ("arm64: tegra: Enable HDMI on Jetson TX1") added a regulator for HDMI on the Jetson TX1 platform. This regulator has an active high enable, but the GPIO specifier for enabling the regulator incorrectly defines it as active-low. This causes the following warning to occur on boot ... WARNING KERN regulator@10 GPIO handle specifies active low - ignored The fixed-regulator binding does not use the active-low flag from the gpio specifier and purely relies of the presence of the 'enable-active-high' property to determine if it is active high or low (if this property is omitted). Fix this warning by setting the GPIO to active-high in the GPIO specifier which aligns with the presense of the 'enable-active-high' property. Fixes: 34993594181d ("arm64: tegra: Enable HDMI on Jetson TX1") Signed-off-by: Jon Hunter Signed-off-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman

arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply

2019-11-25T08:52:00Z

[ Upstream commit 6ff7705da8806de45ca1490194f0b4eb07725804 ] On p2180 sdmmc4 is powered from a fixed 1.8 V regulator. Signed-off-by: Aapo Vienamo Reviewed-by: Mikko Perttunen Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

arm64: tegra: Fix AGIC register range

2019-08-04T07:33:28Z

commit ba24eee6686f6ed3738602b54d959253316a9541 upstream. The Tegra AGIC interrupt controller is an ARM GIC400 interrupt controller. Per the ARM GIC device-tree binding, the first address region is for the GIC distributor registers and the second address region is for the GIC CPU interface registers. The address space for the distributor registers is 4kB, but currently this is incorrectly defined as 8kB for the Tegra AGIC and overlaps with the CPU interface registers. Correct the address space for the distributor to be 4kB. Cc: stable@vger.kernel.org Signed-off-by: Jon Hunter Fixes: bcdbde433542 ("arm64: tegra: Add AGIC node for Tegra210") Signed-off-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman

arm64: tegra: Update Jetson TX1 GPU regulator timings

2019-08-04T07:33:26Z

commit ece6031ece2dd64d63708cfe1088016cee5b10c0 upstream. The GPU regulator enable ramp delay for Jetson TX1 is set to 1ms which not sufficient because the enable ramp delay has been measured to be greater than 1ms. Furthermore, the downstream kernels released by NVIDIA for Jetson TX1 are using a enable ramp delay 2ms and a settling delay of 160us. Update the GPU regulator enable ramp delay for Jetson TX1 to be 2ms and add a settling delay of 160us. Cc: stable@vger.kernel.org Signed-off-by: Jon Hunter Fixes: 5e6b9a89afce ("arm64: tegra: Add VDD_GPU regulator to Jetson TX1") Signed-off-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman

arm64: tegra: Add VDD_GPU regulator to Jetson TX1

2017-01-09T07:32:18Z

commit 5e6b9a89afceadb1ee45472098f7d20af260335c upstream. Add the VDD_GPU regulator (a GPIO-enabled PWM regulator) to the Jetson TX1 board. This addition allows the GPU to be used provided the bootloader properly enabled the GPU node. Signed-off-by: Alexandre Courbot Signed-off-by: Thierry Reding [as pointed out by Thierry on IRC, nobody has reported a bug in the field, but using a new bootloader with a .dtb that has the incorrect data, it will crash on boot] Fixes: 336f79c7b6d7 ("arm64: tegra: Add NVIDIA Jetson TX1 Developer Kit support") Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

2016-10-12T18:05:23Z

Pull thermal managament updates from Zhang Rui: - Enhance thermal "userspace" governor to export the reason when a thermal event is triggered and delivered to user space. From Srinivas Pandruvada - Introduce a single TSENS thermal driver for the different versions of the TSENS IP that exist, on different qcom msm/apq SoCs'. Support for msm8916, msm8960, msm8974 and msm8996 families is also added. From Rajendra Nayak - Introduce hardware-tracked trip points support to the device tree thermal sensor framework. The framework supports an arbitrary number of trip points. Whenever the current temperature is changed, the trip points immediately below and above the current temperature are found, driver callback is invoked to program the hardware to get notified when either of the two trip points are triggered. Hardware-tracked trip points support for rockchip thermal driver is also added at the same time. From Sascha Hauer, Caesar Wang - Introduce a new thermal driver, which enables TMU (Thermal Monitor Unit) on QorIQ platform. From Jia Hongtao - Introduce a new thermal driver for Maxim MAX77620. From Laxman Dewangan - Introduce a new thermal driver for Intel platforms using WhiskeyCove PMIC. From Bin Gao - Add mt2701 chip support to MTK thermal driver. From Dawei Chien - Enhance Tegra thermal driver to enable soctherm node and set "critical", "hot" trips, for Tegra124, Tegra132, Tegra210. From Wei Ni - Add resume support for tango thermal driver. From Marc Gonzalez - several small fixes and improvements for rockchip, qcom, imx, rcar, mtk thermal drivers and thermal core code. From Caesar Wang, Keerthy, Rocky Hao, Wei Yongjun, Peter Robinson, Bui Duc Phuc, Axel Lin, Hugh Kang * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (48 commits) thermal: int3403: Process trip change notification thermal: int340x: New Interface to read trip and notify thermal: user_space gov: Add additional information in uevent thermal: Enhance thermal_zone_device_update for events arm64: tegra: set hot trips for Tegra210 arm64: tegra: set critical trips for Tegra210 arm64: tegra: add soctherm node for Tegra210 arm64: tegra: set hot trips for Tegra132 arm64: tegra: set critical trips for Tegra132 arm64: tegra: use tegra132-soctherm for Tegra132 arm: tegra: set hot trips for Tegra124 arm: tegra: set critical trips for Tegra124 thermal: tegra: add hw-throttle for Tegra132 thermal: tegra: add hw-throttle function of: Add bindings of hw throttle for Tegra soctherm thermal: mtk_thermal: Check return value of devm_thermal_zone_of_sensor_register thermal: Add Mediatek thermal driver for mt2701. dt-bindings: thermal: Add binding document for Mediatek thermal controller thermal: max77620: Add thermal driver for reporting junction temp thermal: max77620: Add DT binding doc for thermal driver ...

arm64: tegra: set hot trips for Tegra210

2016-09-27T06:02:32Z

Enable throttle function for SOC_THERM. Set "hot" trips for cpu and gpu thermal zones, which can trigger the SOC_THERM hardware throttle. Signed-off-by: Wei Ni Signed-off-by: Zhang Rui

arm64: tegra: set critical trips for Tegra210

2016-09-27T06:02:32Z

Set general "critical" trip temperatures for cpu, gpu, mem and pllx thermal zones on Tegra210, these trips can trigger shut down or reset. Signed-off-by: Wei Ni Signed-off-by: Zhang Rui

arm64: tegra: add soctherm node for Tegra210

2016-09-27T06:02:32Z

Adds soctherm node for Tegra210, and add cpu, gpu, mem, pllx as thermal-zones. Set critical trip temperatures for them. Signed-off-by: Wei Ni Signed-off-by: Zhang Rui