kernel.git/arch/arm64/boot/dts/broadcom, branch linux-5.13.yHosts the 0x221E linux distro kernel.
https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-5.13.y2021-07-25T12:37:23ZARM: dts: BCM5301X: Fix NAND nodes names2021-07-25T12:37:23ZRafał Miłecki2021-04-16T13:37:48Zurn:sha1:ca57a034e8464b0581727455f04d8f2923802800
[ Upstream commit b660269cba748dfd07eb5551a88ff34d5ea0b86e ]
This matches nand-controller.yaml requirements.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
arm64: dts: broadcom: bcm4908: add Ethernet MAC addr2021-03-29T18:44:31ZRafał Miłecki2021-03-29T15:45:14Zurn:sha1:9f01f5cdb548352418b34ce77db02a560fe2913b
On most BCM4908 devices MAC address can be read from the bootloader
binary section containing device settings. Use NVMEM to describe that.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
arm64: dts: broadcom: bcm4908: add Ethernet TX irq2021-03-18T03:43:45ZRafał Miłecki2021-03-17T08:16:31Zurn:sha1:5337af7918bedde9713cd223ce5df74b3d6c7d7a
This hardware supports two interrupts, one per DMA channel (RX and TX).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
arm64: dts: broadcom: bcm4908: set Asus GT-AC5300 port 7 PHY mode2021-03-13T17:49:57ZRafał Miłecki2021-03-12T11:01:20Zurn:sha1:5ccb9f9cf05bbd729430c6d6d30d40c96a15c56a
Port 7 is connected to the external BCM53134S switch using RGMII.
Fixes: 527a3ac9bdf8 ("arm64: dts: broadcom: bcm4908: describe internal switch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V12021-03-13T17:49:50ZRafał Miłecki2021-03-10T07:46:03Zurn:sha1:6a30934a5470a0ce7ea32b0c6b600accfae94b1a
Archer C2300 V1 is a home router based on the BCM4906 (2 CPU cores). It
has 512 MiB of RAM, NAND flash, USB 2.0 and USB 3.0 ports, 4 LAN ports,
1 WAN port.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
arm64: dts: broadcom: bcm4908: fix switch parent node name2021-03-10T19:10:39ZRafał Miłecki2021-03-09T18:44:09Zurn:sha1:a348ff97ffb840b9d74b0e64b3e0e6002187d224
Ethernet switch and MDIO are grouped using "simple-bus". It's not
allowed to use "ethernet-switch" node name as it isn't a switch. Replace
it with "bus".
Fixes: 527a3ac9bdf8 ("arm64: dts: broadcom: bcm4908: describe internal switch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
arm64: dts: broadcom: bcm4908: describe firmware partitions2021-03-10T19:10:39ZRafał Miłecki2021-02-19T05:50:30Zurn:sha1:cbaca2c467dc25a163107e14a53b7925214eab17
BCM4908 bootloader supports multiple firmware partitions and has its own
bindings defined for them.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs2021-03-10T19:10:39ZRafał Miłecki2021-02-19T05:50:29Zurn:sha1:6224415c0389ba6661825746312163a64ece8f3a
There are a few more GPIO connected LEDs there didn't get described
initially.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch2021-03-09T23:06:31ZRafał Miłecki2021-02-19T05:50:28Zurn:sha1:406e98afffe975982f63ea5d21bf9a47a81b56ee
R8000P model has 4 LAN ports and 1 WAN port.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
arm64: dts: broadcom: bcm4908: describe Ethernet controller2021-03-09T23:06:31ZRafał Miłecki2021-02-19T05:50:27Zurn:sha1:b1bbe48eec190b6a35f400c5a3ec6b0fc8fc3fe6
BCM4908 SoCs have an integrated Ethernet controller.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>