kernel.git/arch/arm/include/asm/kvm_host.h, branch linux-5.1.y

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2019-03-15T22:00:28Z

Pull KVM updates from Paolo Bonzini: "ARM: - some cleanups - direct physical timer assignment - cache sanitization for 32-bit guests s390: - interrupt cleanup - introduction of the Guest Information Block - preparation for processor subfunctions in cpu models PPC: - bug fixes and improvements, especially related to machine checks and protection keys x86: - many, many cleanups, including removing a bunch of MMU code for unnecessary optimizations - AVIC fixes Generic: - memcg accounting" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits) kvm: vmx: fix formatting of a comment KVM: doc: Document the life cycle of a VM and its resources MAINTAINERS: Add KVM selftests to existing KVM entry Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()" KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char() KVM: PPC: Fix compilation when KVM is not enabled KVM: Minor cleanups for kvm_main.c KVM: s390: add debug logging for cpu model subfunctions KVM: s390: implement subfunction processor calls arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2 KVM: arm/arm64: Remove unused timer variable KVM: PPC: Book3S: Improve KVM reference counting KVM: PPC: Book3S HV: Fix build failure without IOMMU support Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()" x86: kvmguest: use TSC clocksource if invariant TSC is exposed KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes() KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children ...

KVM: arm/arm64: Factor out VMID into struct kvm_vmid

2019-02-19T21:05:35Z

In preparation for nested virtualization where we are going to have more than a single VMID per VM, let's factor out the VMID data into a separate VMID data structure and change the VMID allocator to operate on this new structure instead of using a struct kvm. This also means that udate_vttbr now becomes update_vmid, and that the vttbr itself is generated on the fly based on the stage 2 page table base address and the vmid. We cache the physical address of the pgd when allocating the pgd to avoid doing the calculation on every entry to the guest and to avoid calling into potentially non-hyp-mapped code from hyp/EL2. If we wanted to merge the VMID allocator with the arm64 ASID allocator at some point in the future, it should actually become easier to do that after this patch. Note that to avoid mapping the kvm_vmid_bits variable into hyp, we simply forego the masking of the vmid value in kvm_get_vttbr and rely on update_vmid to always assign a valid vmid value (within the supported range). Reviewed-by: Marc Zyngier [maz: minor cleanups] Reviewed-by: Julien Thierry Signed-off-by: Christoffer Dall Signed-off-by: Marc Zyngier

arm/arm64: KVM: Statically configure the host's view of MPIDR

2019-02-19T21:05:35Z

We currently eagerly save/restore MPIDR. It turns out to be slightly pointless: - On the host, this value is known as soon as we're scheduled on a physical CPU - In the guest, this value cannot change, as it is set by KVM (and this is a read-only register) The result of the above is that we can perfectly avoid the eager saving of MPIDR_EL1, and only keep the restore. We just have to setup the host contexts appropriately at boot time. Signed-off-by: Marc Zyngier Acked-by: Christoffer Dall Signed-off-by: Christoffer Dall

ARM: KVM: Teach some form of type-safety to kvm_call_hyp

2019-02-19T21:05:34Z

Just like on arm64, and for the same reasons, kvm_call_hyp removes any form of type safety when calling into HYP. But we can still try to tell the compiler what we're trying to achieve. Here, we can add code that would do the function call if it wasn't guarded by an always-false predicate. Hopefully, the compiler is dumb enough to do the type checking and clever enough to not emit the corresponding code... Signed-off-by: Marc Zyngier Acked-by: Christoffer Dall Signed-off-by: Christoffer Dall

arm/arm64: KVM: Introduce kvm_call_hyp_ret()

2019-02-19T21:05:24Z

Until now, we haven't differentiated between HYP calls that have a return value and those who don't. As we're about to change this, introduce kvm_call_hyp_ret(), and change all call sites that actually make use of a return value. Signed-off-by: Marc Zyngier Acked-by: Christoffer Dall Signed-off-by: Christoffer Dall

arm/arm64: KVM: Allow a VCPU to fully reset itself

2019-02-07T11:44:13Z

The current kvm_psci_vcpu_on implementation will directly try to manipulate the state of the VCPU to reset it. However, since this is not done on the thread that runs the VCPU, we can end up in a strangely corrupted state when the source and target VCPUs are running at the same time. Fix this by factoring out all reset logic from the PSCI implementation and forwarding the required information along with a request to the target VCPU. Reviewed-by: Andrew Jones Signed-off-by: Marc Zyngier Signed-off-by: Christoffer Dall

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2018-12-26T19:46:28Z

Pull KVM updates from Paolo Bonzini: "ARM: - selftests improvements - large PUD support for HugeTLB - single-stepping fixes - improved tracing - various timer and vGIC fixes x86: - Processor Tracing virtualization - STIBP support - some correctness fixes - refactorings and splitting of vmx.c - use the Hyper-V range TLB flush hypercall - reduce order of vcpu struct - WBNOINVD support - do not use -ftrace for __noclone functions - nested guest support for PAUSE filtering on AMD - more Hyper-V enlightenments (direct mode for synthetic timers) PPC: - nested VFIO s390: - bugfixes only this time" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits) KVM: x86: Add CPUID support for new instruction WBNOINVD kvm: selftests: ucall: fix exit mmio address guessing Revert "compiler-gcc: disable -ftracer for __noclone functions" KVM: VMX: Move VM-Enter + VM-Exit handling to non-inline sub-routines KVM: VMX: Explicitly reference RCX as the vmx_vcpu pointer in asm blobs KVM: x86: Use jmp to invoke kvm_spurious_fault() from .fixup MAINTAINERS: Add arch/x86/kvm sub-directories to existing KVM/x86 entry KVM/x86: Use SVM assembly instruction mnemonics instead of .byte streams KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range() KVM/MMU: Flush tlb directly in kvm_set_pte_rmapp() KVM/MMU: Move tlb flush in kvm_set_pte_rmapp() to kvm_mmu_notifier_change_pte() KVM: Make kvm_set_spte_hva() return int KVM: Replace old tlb flush function with new one to flush a specified range. KVM/MMU: Add tlb flush with range helper function KVM/VMX: Add hv tlb range flush support x86/hyper-v: Add HvFlushGuestAddressList hypercall support KVM: Add tlb_remote_flush_with_range callback in kvm_x86_ops KVM: x86: Disable Intel PT when VMXON in L1 guest KVM: x86: Set intercept for Intel PT MSRs read/write KVM: x86: Implement Intel PT MSRs read/write emulation ...

KVM: Make kvm_set_spte_hva() return int

2018-12-21T10:28:41Z

The patch is to make kvm_set_spte_hva() return int and caller can check return value to determine flush tlb or not. Signed-off-by: Lan Tianyu Acked-by: Paul Mackerras Signed-off-by: Paolo Bonzini

arm64: KVM: Consistently advance singlestep when emulating instructions

2018-12-18T14:11:37Z

When we emulate a guest instruction, we don't advance the hardware singlestep state machine, and thus the guest will receive a software step exception after a next instruction which is not emulated by the host. We bodge around this in an ad-hoc fashion. Sometimes we explicitly check whether userspace requested a single step, and fake a debug exception from within the kernel. Other times, we advance the HW singlestep state rely on the HW to generate the exception for us. Thus, the observed step behaviour differs for host and guest. Let's make this simpler and consistent by always advancing the HW singlestep state machine when we skip an instruction. Thus we can rely on the hardware to generate the singlestep exception for us, and never need to explicitly check for an active-pending step, nor do we need to fake a debug exception from the guest. Cc: Peter Maydell Reviewed-by: Alex Bennée Reviewed-by: Christoffer Dall Signed-off-by: Mark Rutland Signed-off-by: Marc Zyngier

KVM: arm64: Rework detection of SVE, !VHE systems

2018-12-10T11:57:52Z

An SVE system is so far the only case where we mandate VHE. As we're starting to grow this requirements, let's slightly rework the way we deal with that situation, allowing for easy extension of this check. Acked-by: Christoffer Dall Reviewed-by: James Morse Signed-off-by: Marc Zyngier Signed-off-by: Will Deacon