kernel.git/arch/arm/configs, branch linux-4.17.y

ARM: imx_v4_v5_defconfig: Select ULPI support

2018-08-24T11:06:57Z

[ Upstream commit 2ceb2780b790b74bc408a949f6aedbad8afa693e ] Select CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS so that USB ULPI can be functional on some boards like that use ULPI interface. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ARM: imx_v6_v7_defconfig: Select ULPI support

2018-08-24T11:06:57Z

[ Upstream commit 157bcc06094c3c5800d3f4676527047b79b618e7 ] Select CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS so that USB ULPI can be functional on some boards like imx51-babbge. This fixes a kernel hang in 4.18-rc1 on i.mx51-babbage, caused by commit 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51"). Suggested-by: Andrey Smirnov Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ARM: defconfig: Update Gemini defconfig

2018-04-26T14:55:43Z

This updates the Gemini defconfig with a config that will bring up most of the recently merged and updated devices to some functional level: - We enable high resolution timers (the right thing to do) - Enable CMA for the framebuffer, and the new TVE200 framebuffer driver and the Ilitek ILI9322 driver for graphics on the D-Link DIR-685. HIGHMEM support comes in as part of this. - Enable networking and the new Cortina Gemini ethernet driver. - Enable MDIO over GPIO and the Realtek PHY devices used on several of these systems. - Enable I2C over GPIO and SPI over GPIO which is used on several of these devices. - Enable the Thermal framework, GPIO fan control and LM75 sensor adding cooling on the D-Link DNS-313 with no userspace involved even if only the kernel is working, rock solid thermal for this platform. - Enable JEDEC flash probing to support the Eon flash chip in D-Link DNS-313. - Enable LED disk triggers for the NAS type devices. Signed-off-by: Linus Walleij Signed-off-by: Arnd Bergmann

ARM: socfpga_defconfig: Remove QSPI Sector 4K size force

2018-04-16T14:14:30Z

Remove QSPI Sector 4K size force which is causing QSPI boot problems with the JFFS2 root filesystem. Fixes the following error: "Magic bitmask 0x1985 not found at ..." Cc: stable@vger.kernel.org Signed-off-by: Thor Thayer Signed-off-by: Dinh Nguyen

ARM: multi_v7_defconfig: add NXP FlexCAN IP support

2018-03-27T13:38:31Z

Enable FlexCAN support as module by default. FlexCAN can be found on various NXP designs such as the i.MX and Vybrid SoC family. Signed-off-by: Stefan Agner Signed-off-by: Arnd Bergmann

ARM: multi_v7_defconfig: enable thermal driver for i.MX devices

2018-03-27T13:38:11Z

Enable the i.MX thermal driver required for i.MX SoC family. Signed-off-by: Stefan Agner Signed-off-by: Arnd Bergmann

ARM: multi_v7_defconfig: add RN5T618 PMIC family support

2018-03-27T13:36:24Z

This allows to successfully boot Colibri iMX7 which is using the Ricoh RN5T567 PMIC. Signed-off-by: Stefan Agner Signed-off-by: Arnd Bergmann

ARM: multi_v7_defconfig: add NXP graphics drivers

2018-03-27T13:36:11Z

Enable drivers to support NXP graphics IPs such as: - Etnaviv (e.g. i.MX6) - DCU (e.g. Vybrid LS1021A) - mxsfb (e.g. i.MX6UL/ULL/7) Signed-off-by: Stefan Agner Signed-off-by: Arnd Bergmann

ARM: multi_v7_defconfig: add GPMI NAND controller support

2018-03-27T13:35:58Z

Add GPMI NAND controller support as required by some NXP i.MX6/7 based boards. Signed-off-by: Stefan Agner Signed-off-by: Arnd Bergmann

ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs

2018-03-27T13:35:43Z

Enable on-chip OTP NVMEM support for NXP i.MX and VF610 SoCs. Since OTP values might be required by drivers required during boot, make sure the driver is built-in (e.g. i.MX thermal driver). Signed-off-by: Stefan Agner Signed-off-by: Arnd Bergmann