Hosts the 0x221E linux distro kernel. https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-3.11.y 2013-07-02T21:42:51Z 2013-07-02T21:42:51Z Linus Torvalds 2013-07-02T21:42:51Z urn:sha1:42daabf62bfa3c00974b43f030dadcf704c0db59 Pull ARM SoC late changes from Arnd Bergmann: "These are changes that arrived a little late before the merge window or that have multiple dependencies on previous branches so they did not fit into one of the earlier ones. There are 10 branches merged here, a total of 39 non-merge commits. Contents are a mixed bag for the above reasons: * Two new SoC platforms: ST microelectronics stixxxx and the TI 'Nspire' graphing calculator. These should have been in the 'soc' branch but were a little late * Support for the Exynos 5420 variant in mach-exynos, which is based on the other exynos branches to avoid conflicts. * Various small changes for sh-mobile, ux500 and davinci * Common clk support for MSM" * tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) ARM: ux500: bail out on alien cpus ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins serial: sh-sci: Initialise variables before access in sci_set_termios() ARM: stih41x: Add B2020 board support ARM: stih41x: Add B2000 board support ARM: sti: Add DEBUG_LL console support ARM: sti: Add STiH416 SOC support ARM: sti: Add STiH415 SOC support ARM: msm: Migrate to common clock framework ARM: msm: Make proc_comm clock control into a platform driver ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver ARM: msm: Remove clock-7x30.h include file ARM: msm: Remove custom clk_set_{max,min}_rate() API ARM: msm: Remove custom clk_set_flags() API msm: iommu: Use clk_set_rate() instead of clk_set_min_rate() msm: iommu: Convert to clk_prepare/unprepare msm_sdcc: Convert to clk_prepare/unprepare usb: otg: msm: Convert to clk_prepare/unprepare msm_serial: Use devm_clk_get() and properly return errors msm_serial: Convert to clk_prepare/unprepare ... 2013-07-02T21:23:01Z Linus Torvalds 2013-07-02T21:23:01Z urn:sha1:ee1a8d402e7e204d57fb108aa40003b6d1633036 Pull ARM SoC device tree changes from Arnd Bergmann: "These changes from 30 individual branches for the most part update device tree files, but there are also a few source code changes that have crept in this time, usually in order to atomically move over a driver from using hardcoded data to DT probing. A number of platforms change their DT files to use the C preprocessor, which is causing a bit of churn, but that is hopefully only this once" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits) ARM: at91: dt: rm9200ek: add spi support ARM: at91: dt: rm9200: add spi support ARM: at91/DT: at91sam9n12: add SPI DMA client infos ARM: at91/DT: sama5d3: add SPI DMA client infos ARM: at91/DT: fix SPI compatibility string ARM: Kirkwood: Fix the internal register ranges translation ARM: dts: bcm281xx: change comment to C89 style ARM: mmc: bcm281xx SDHCI driver (dt mods) ARM: nomadik: add the new clocks to the device tree clk: nomadik: implement the Nomadik clocks properly ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency ARM: dts: omap4-panda: Fix DVI EDID reads ARM: dts: omap4-panda: Add USB Host support arm: mvebu: enable mini-PCIe connectors on Armada 370 RD ARM: shmobile: irqpin: add a DT property to enable masking on parent ARM: dts: AM43x EPOS EVM support ARM: dts: OMAP5: Add bandgap DT entry ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone ... 2013-06-25T20:43:28Z Olof Johansson 2013-06-25T20:43:28Z urn:sha1:37c5a9f7d73352650447c3984a39007304287303 From Srinivas Kandagatla <srinivas.kandagatla@st.com>: This patch-set adds basic support for STMicroelectronics STi series SOCs which includes STiH415 and STiH416 with B2000 and B2020 board support. STiH415 and STiH416 are dual-core ARM Cortex-A9 CPU, designed for use in Set-top-boxes. The SOC support is available in mach-sti which contains support code for STiH415, STiH416 SOCs including the generic board support. The reason for adding two SOCs at this patch set is to show that no new C code is required for second SOC(STiH416) support. * sti/soc: ARM: stih41x: Add B2020 board support ARM: stih41x: Add B2000 board support ARM: sti: Add DEBUG_LL console support ARM: sti: Add STiH416 SOC support ARM: sti: Add STiH415 SOC support Signed-off-by: Olof Johansson <olof@lixom.net> 2013-06-25T20:43:18Z Olof Johansson 2013-06-25T20:36:09Z urn:sha1:2655e828350cc7558d1a74cd4464e34b81e17f36 From Daniel Tang <dt.tangr@gmail.com> This is the initial platform code for the TI-Nspire graphing calculators. The platform support is rather unspectacular, but still contains platform data for the LCD panel, which will get removed once there is a DT binding for the AMBA CLCD driver. * nspire/soc: arm: Add Initial TI-Nspire support arm: Add device trees for TI-Nspire hardware Signed-off-by: Olof Johansson <olof@lixom.net> 2013-06-25T20:42:51Z Srinivas Kandagatla 2013-06-25T11:16:13Z urn:sha1:40e3e6725370481b7b81d969dbde056f50d870ae B2020 ADI board is reference board for STIH415/416 SOCs, it has 2 x UART, 4x USB, 1 x Ethernet, 1 x SATA, 1 x PCIe, and 2GB RAM with standard set-top box IPs. This patch adds initial support to B2020 with STiH415/416 with SBC_UART1 as console and a heard beat LED. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Stephen Gallimore <stephen.gallimore@st.com> CC: Stuart Menefy <stuart.menefy@st.com> CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net> 2013-06-25T20:42:50Z Srinivas Kandagatla 2013-06-25T11:16:04Z urn:sha1:f1148dba64f3bf3a346e1eb7cdfac0e5f70660c8 B2000 board is reference board for STIH415/416 SOCs, it has 2 x UART, 4x USB, 2 x Ethernet, 1 x SATA, 1 x PCIe, and 1GB RAM. This patch add initial support to b2000 with STiH415/416 with UART2 as console and a heard beat LED. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> CC: Stephen Gallimore <stephen.gallimore@st.com> CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net> 2013-06-21T18:06:29Z Daniel Tang 2013-06-11T08:40:18Z urn:sha1:d907849e0dbaeacb34e0a6a3b49ebeaf8c49355e This patch adds device trees for describing the TI-Nspire hardware. Changes between v1 and v2: * Change "keymap" binding to the standard "linux,keymap" binding. Signed-off-by: Daniel Tang <dt.tangr@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> 2013-06-20T21:01:41Z Arnd Bergmann 2013-06-20T21:01:41Z urn:sha1:076919a6e0154f06221e02f9e58b14eb1ed9e019 From Benoit Cousson: omap devicetree changes for v3.11 merge window - Add mandatory DT support for missing IPs, like USB host, bandgap, LED, NAND, LAN, CPSW, PWM for OMAP and AMXX devices. - Introduce new AM43x silicon. * 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt: (52 commits) ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency ARM: dts: omap4-panda: Fix DVI EDID reads ARM: dts: omap4-panda: Add USB Host support ARM: dts: AM43x EPOS EVM support ARM: dts: OMAP5: Add bandgap DT entry ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone ARM: dts: omap3-overo: Add default trigger for TWL4030 LED ARM: dts: omap3-tobi: Correct polarity for GPIO LED ARM: dts: omap3-tobi: Add SMSC911X node ARM: dts: OMAP3: Include IRQ header ARM: dts: Protect pinctrl headers against multiple inclusions ARM: AM33XX: clock data: Enable clkout2 as part of init ARM: AM33XX: clock: Add debugSS clock nodes ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm ARM: dts: AM33XX: Add PWMSS device tree nodes ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com> 2013-06-20T13:23:41Z Arnd Bergmann 2013-06-20T13:23:41Z urn:sha1:dc61cd9ecb918f593972962b97cf6079ab9d1daf From Maxime Ripard: Allwinner SoCs DT additions for 3.11, part 2 Mostly adds support for the i2c controllers and the Allwinner A10S SoC. * tag 'sunxi-dt-for-3.11-2' of git://github.com/mripard/linux: ARM: sunxi: Add Olimex A10s-Olinuxino-micro device tree ARM: sunxi: dt: Add Allwinner A10s DTSI ARM: sun4i: cubieboard: Enable the i2c controllers ARM: sun5i: olinuxino: Enable the i2c controllers ARM: sun5i: dt: Add i2c muxing options ARM: sun4i: dt: Add i2c muxing options ARM: sunxi: dt: Add i2c controller nodes to the DTSI Signed-off-by: Arnd Bergmann <arnd@arndb.de> 2013-06-20T00:11:29Z Arnd Bergmann 2013-06-20T00:11:29Z urn:sha1:ed2ca6ee4bfd060c079fd05d0eb8862da02dd248 From Shawn Guo: imx device tree changes for 3.11: * A bunch of new board additions, imx6sl-evk, vf610-twr, imx53-tx53, imx53-m53evk and imx27-phytec-phycore * Various pinctrl setting updates and additions * Enable various on board peripherals, usb, audio, nor, display etc. * Configure L2 cache data and tag latency from device tree * Add imx-weim bus driver * tag 'imx-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: (82 commits) ARM: dts: imx27: Add VPU devicetree node ARM: mxc: fix gpio-ranges for VF610 ARM: dtsi: imx6qdl-sabresd: Enable WM8962 audio support ARM: dtsi: imx6qdl-sabresd: Enable SSI2 and AUDMUX ARM: dtsi: imx6qdl-sabresd: Add WM8962 CODEC support ARM: dtsi: imx6qdl-sabresd: add a fixed regulator for WM8962 ARM: dtsi: imx6dl: Add a pinctrl for AUDMUX ARM: dtsi: imx6q/imx6dl: Add a pinctrl for I2C1 ARM: dts: imx6qdl-sabresd: add clko1 iomux configuration ARM: dts: Phytec imx6q pfla02 and pbab01 support ARM: dts: imx6q: Add pinctrl for usdhc2 and enet ARM: dts: imx27-phytec-phycore-rdk: Add MTD name for NOR flash ARM: dts: imx27-phytec-phycore-rdk: Add SDHC support ARM: dts: i.MX27: Add SDHC devicetree nodes ARM: dts: i.MX27: Add DMA devicetree node ARM: dts: imx6qdl-sabreauto: enable the WEIM NOR ARM: dts: imx6dl: add pinctrls for WEIM NOR ARM: dts: imx6q: add pinctrls for WEIM NOR ARM: dts: imx6qdl: add more information for WEIM ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIM ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>