kernel.git/arch/arm/boot/compressed/Makefile, branch linux-5.12.y

ARM: 9056/1: decompressor: fix BSS size calculation for LLVM ld.lld

2021-05-12T06:39:28Z

commit c4e792d1acce31c2eb7b9193ab06ab94de05bf42 upstream. The LLVM ld.lld linker uses a different symbol type for __bss_start, resulting in the calculation of KBSS_SZ to be thrown off. Up until now, this has gone unnoticed as it only affects the appended DTB case, but pending changes for ARM in the way the decompressed kernel is cleaned from the caches has uncovered this problem. On a ld.lld build: $ nm vmlinux |grep bss_ c1c22034 D __bss_start c1c86e98 B __bss_stop resulting in $ readelf -s arch/arm/boot/compressed/vmlinux | grep bss_size 433: c1c86e98 0 NOTYPE GLOBAL DEFAULT ABS _kernel_bss_size which is obviously incorrect, and may cause the cache clean to access unmapped memory, or cause the size calculation to wrap, resulting in no cache clean to be performed at all. Fix this by updating the sed regex to take D type symbols into account. Link: https://lore.kernel.org/linux-arm-kernel/6c65bcef-d4e7-25fa-43cf-2c435bb61bb9@collabora.com/ Link: https://lore.kernel.org/linux-arm-kernel/20210205085220.31232-1-ardb@kernel.org/ Cc: # v4.19+ Reviewed-by: Nick Desaulniers Tested-by: Nick Desaulniers Reported-by: Guillaume Tucker Reported-by: "kernelci.org bot" Signed-off-by: Ard Biesheuvel Signed-off-by: Russell King Signed-off-by: Greg Kroah-Hartman

ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB

2021-02-01T19:42:13Z

Currently, the start address of physical memory is obtained by masking the program counter with a fixed mask of 0xf8000000. This mask value was chosen as a balance between the requirements of different platforms. However, this does require that the start address of physical memory is a multiple of 128 MiB, precluding booting Linux on platforms where this requirement is not fulfilled. Fix this limitation by validating the masked address against the memory information in the passed DTB. Only use the start address from DTB when masking would yield an out-of-range address, prefer the traditional method in all other cases. Note that this applies only to the explicitly passed DTB on modern systems, and not to a DTB appended to the kernel, or to ATAGS. The appended DTB may need to be augmented by information from ATAGS, which may need to rely on knowledge of the start address of physical memory itself. This allows to boot Linux on r7s9210/rza2mevb using the 64 MiB of SDRAM on the RZA2MEVB sub board, which is located at 0x0C000000 (CS3 space), i.e. not at a multiple of 128 MiB. Suggested-by: Nicolas Pitre Suggested-by: Ard Biesheuvel Signed-off-by: Geert Uytterhoeven Reviewed-by: Ard Biesheuvel Acked-by: Nicolas Pitre Signed-off-by: Russell King

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux

2020-12-22T21:34:27Z

Pull ARM updates from Russell King: - Rework phys/virt translation - Add KASan support - Move DT out of linear map region - Use more PC-relative addressing in assembly - Remove FP emulation handling while in kernel mode - Link with '-z norelro' - remove old check for GCC <= 4.2 in ARM unwinder code - disable big endian if using clang's linker * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (46 commits) ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section ARM: 9038/1: Link with '-z norelro' ARM: 9037/1: uncompress: Add OF_DT_MAGIC macro ARM: 9036/1: uncompress: Fix dbgadtb size parameter name ARM: 9035/1: uncompress: Add be32tocpu macro ARM: 9033/1: arm/smp: Drop the macro S(x,s) ARM: 9032/1: arm/mm: Convert PUD level pgtable helper macros into functions ARM: 9031/1: hyp-stub: remove unused .L__boot_cpu_mode_offset symbol ARM: 9044/1: vfp: use undef hook for VFP support detection ARM: 9034/1: __div64_32(): straighten up inline asm constraints ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel mode ARM: 9029/1: Make iwmmxt.S support Clang's integrated assembler ARM: 9028/1: disable KASAN in call stack capturing routines ARM: 9026/1: unwind: remove old check for GCC <= 4.2 ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN depends on !LD_IS_LLD ARM: 9024/1: Drop useless cast of "u64" to "long long" ARM: 9023/1: Spelling s/mmeory/memory/ ARM: 9022/1: Change arch/arm/lib/mem*.S to use WEAK instead of .weak ARM: kvm: replace open coded VA->PA calculations with adr_l call ARM: head.S: use PC relative insn sequence to calculate PHYS_OFFSET ...

kbuild: Hoist '--orphan-handling' into Kconfig

2020-12-01T13:45:36Z

Currently, '--orphan-handling=warn' is spread out across four different architectures in their respective Makefiles, which makes it a little unruly to deal with in case it needs to be disabled for a specific linker version (in this case, ld.lld 10.0.1). To make it easier to control this, hoist this warning into Kconfig and the main Makefile so that disabling it is simpler, as the warning will only be enabled in a couple places (main Makefile and a couple of compressed boot folders that blow away LDFLAGS_vmlinx) and making it conditional is easier due to Kconfig syntax. One small additional benefit of this is saving a call to ld-option on incremental builds because we will have already evaluated it for CONFIG_LD_ORPHAN_WARN. To keep the list of supported architectures the same, introduce CONFIG_ARCH_WANT_LD_ORPHAN_WARN, which an architecture can select to gain this automatically after all of the sections are specified and size asserted. A special thanks to Kees Cook for the help text on this config. Link: https://github.com/ClangBuiltLinux/linux/issues/1187 Acked-by: Kees Cook Acked-by: Michael Ellerman (powerpc) Reviewed-by: Nick Desaulniers Tested-by: Nick Desaulniers Signed-off-by: Nathan Chancellor Signed-off-by: Masahiro Yamada

ARM: 9013/2: Disable KASan instrumentation for some code

2020-10-27T12:11:04Z

Disable instrumentation for arch/arm/boot/compressed/* since that code is executed before the kernel has even set up its mappings and definately out of scope for KASan. Disable instrumentation of arch/arm/vdso/* because that code is not linked with the kernel image, so the KASan management code would fail to link. Disable instrumentation of arch/arm/mm/physaddr.c. See commit ec6d06efb0ba ("arm64: Add support for CONFIG_DEBUG_VIRTUAL") for more details. Disable kasan check in the function unwind_pop_register because it does not matter that kasan checks failed when unwind_pop_register() reads the stack memory of a task. Cc: Andrey Ryabinin Cc: Alexander Potapenko Cc: Dmitry Vyukov Cc: kasan-dev@googlegroups.com Reviewed-by: Ard Biesheuvel Tested-by: Ard Biesheuvel # QEMU/KVM/mach-virt/LPAE/8G Tested-by: Florian Fainelli # Brahma SoCs Tested-by: Ahmad Fatoum # i.MX6Q Reported-by: Florian Fainelli Reported-by: Marc Zyngier Signed-off-by: Abbott Liu Signed-off-by: Florian Fainelli Signed-off-by: Linus Walleij Signed-off-by: Russell King

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

2020-10-20T16:18:31Z

Pull ARM updates from Russell King: - handle inexact watchpoint addresses (Douglas Anderson) - decompressor serial debug cleanups (Linus Walleij) - update L2 cache prefetch bits (Guillaume Tucker) - add text offset and malloc size to the decompressor kexec data * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: add malloc size to decompressor kexec size structure ARM: add TEXT_OFFSET to decompressor kexec image structure ARM: 9007/1: l2c: fix prefetch bits init in L2X0_AUX_CTRL using DT values ARM: 9010/1: uncompress: Print the location of appended DTB ARM: 9009/1: uncompress: Enable debug in head.S ARM: 9008/1: uncompress: Drop excess whitespace print ARM: 9006/1: uncompress: Wait for ready and busy in debug prints ARM: 9005/1: debug: Select flow control for all debug UARTs ARM: 9004/1: debug: Split waituart to CTS and TXRDY ARM: 9003/1: uncompress: Delete unused debug macros ARM: 8997/2: hw_breakpoint: Handle inexact watchpoint addresses

ARM: add malloc size to decompressor kexec size structure

2020-09-15T13:36:26Z

Add the required malloc size to the decompressor kexec size structure. Signed-off-by: Russell King

ARM: add TEXT_OFFSET to decompressor kexec image structure

2020-09-15T13:36:25Z

Add the TEXT_OFFSET to the decompressor's kexec image structure to kexec knows what offset to use. Signed-off-by: Russell King

ARM: 9009/1: uncompress: Enable debug in head.S

2020-09-15T13:35:31Z

The assembly file head.S includes some debug code that does not get enabled when we select CONFIG_DEBUG_UNCOMPRESS. The debug in head.S relies on the user tagging on -DDEBUG on the compilation command line. To simplify debugging, tag on -DDEBUG so that we also get these debug messages when selecting CONFIG_DEBUG_UNCOMPRESS. Signed-off-by: Linus Walleij Signed-off-by: Russell King

arm/boot: Warn on orphan section placement

2020-09-03T08:28:35Z

We don't want to depend on the linker's orphan section placement heuristics as these can vary between linkers, and may change between versions. All sections need to be explicitly handled in the linker script. With all sections now handled, enable orphan section warning. Signed-off-by: Kees Cook Signed-off-by: Ingo Molnar Reviewed-by: Nick Desaulniers Link: https://lore.kernel.org/r/20200902025347.2504702-4-keescook@chromium.org