Hosts the 0x221E linux distro kernel. https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-3.8.y 2012-12-13T18:57:16Z 2012-12-13T18:57:16Z Linus Torvalds 2012-12-13T18:57:16Z urn:sha1:b8edf848e9119bab9d999b9ca80d8520641810f2 Pull ARM SoC multiplatform conversion patches from Olof Johansson: "Here are more patches in the progression towards multiplatform, sparse irq conversions in particular. Tegra has a handful of cleanups and general groundwork, but is not quite there yet on full enablement. Platforms that are enabled through this branch are VT8500 and Zynq. Note that i.MX was converted in one of the earlier cleanup branches as well (before we started a separate topic for multiplatform). And both new platforms for this merge window, sunxi and bcm, were merged with multiplatform support enabled." Fix up conflicts mostly as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM: zynq: Remove all unused mach headers ARM: zynq: add support for ARCH_MULTIPLATFORM ARM: zynq: make use of debug_ll_io_init() ARM: zynq: remove TTC early mapping ARM: tegra: move debug-macro.S to include/debug ARM: tegra: don't include iomap.h from debug-macro.S ARM: tegra: decouple uncompress.h and debug-macro.S ARM: tegra: simplify DEBUG_LL UART selection options ARM: tegra: select SPARSE_IRQ ARM: tegra: enhance timer.c to get IO address from device tree ARM: tegra: enhance timer.c to get IRQ info from device tree ARM: timer: fix checkpatch warnings ARM: tegra: add TWD to device tree ARM: tegra: define DT bindings for and instantiate RTC ARM: tegra: define DT bindings for and instantiate timer clocksource/mtu-nomadik: use apb_pclk clk: ux500: Register mtu apb_pclocks ARM: plat-nomadik: convert platforms to SPARSE_IRQ mfd/db8500-prcmu: use the irq_domain_add_simple() mfd/ab8500-core: use irq_domain_add_simple() ... 2012-12-12T20:05:15Z Linus Torvalds 2012-12-12T20:05:15Z urn:sha1:d027db132b395dabfac208e52a7e510e441bb9d2 Pull ARM SoC updates from Olof Johansson: "This contains the bulk of new SoC development for this merge window. Two new platforms have been added, the sunxi platforms (Allwinner A1x SoCs) by Maxime Ripard, and a generic Broadcom platform for a new series of ARMv7 platforms from them, where the hope is that we can keep the platform code generic enough to have them all share one mach directory. The new Broadcom platform is contributed by Christian Daudt. Highbank has grown support for Calxeda's next generation of hardware, ECX-2000. clps711x has seen a lot of cleanup from Alexander Shiyan, and he's also taken on maintainership of the platform. Beyond this there has been a bunch of work from a number of people on converting more platforms to IRQ domains, pinctrl conversion, cleanup and general feature enablement across most of the active platforms." Fix up trivial conflicts as per Olof. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits) mfd: vexpress-sysreg: Remove LEDs code irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids irq: versatile: delete dangling variable ARM: sunxi: add missing include for mdelay() ARM: EXYNOS: Avoid early use of of_machine_is_compatible() ARM: dts: add node for PL330 MDMA1 controller for exynos4 ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412 ARM: EXYNOS: add UART3 to DEBUG_LL ports ARM: S3C24XX: Add clkdev entry for camif-upll clock ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers ARM: sunxi: Add missing sun4i.dtsi file pinctrl: samsung: Do not initialise statics to 0 ARM i.MX6: remove gate_mask from pllv3 ARM i.MX6: Fix ethernet PLL clocks ARM i.MX6: rename PLLs according to datasheet ARM i.MX6: Add pwm support ARM i.MX51: Add pwm support ARM i.MX53: Add pwm support ARM: mx5: Replace clk_register_clkdev with clock DT lookup ... 2012-12-12T19:51:39Z Linus Torvalds 2012-12-12T19:51:39Z urn:sha1:d01e4afdbb65e030fd6f1f96c30a558e2eb0f279 Pull ARM SoC cleanups on various subarchitectures from Olof Johansson: "Cleanup patches for various ARM platforms and some of their associated drivers. There's also a branch in here that enables Freescale i.MX to be part of the multiplatform support -- the first "big" SoC that is moved over (more multiplatform work comes in a separate branch later during the merge window)." Conflicts fixed as per Olof, including a silent semantic one in arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to omap3xxx_restart(), and a new user of the old name was added). * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits) ARM: omap: fix typo on timer cleanup ARM: EXYNOS: Remove unused regs-mem.h file ARM: EXYNOS: Remove unused non-dt support for dwmci controller ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: SAMSUNG: use devm_ functions for ADC driver ARM: EXYNOS: no duplicate mask/unmask in eint0_15 ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443 ARM: EXYNOS: Remove i2c0 resource information and setting of device names ARM: Kirkwood: checkpatch cleanups ARM: Kirkwood: Fix sparse warnings. ARM: Kirkwood: Remove unused includes ARM: kirkwood: cleanup lsxl board includes ARM: integrator: use BUG_ON where possible ARM: integrator: push down SC dependencies ARM: integrator: delete static UART1 mapping ARM: integrator: delete SC mapping on the CP ARM: integrator: remove static CP syscon mapping ARM: integrator: remove static AP syscon mapping ... 2012-12-12T19:30:02Z Linus Torvalds 2012-12-12T19:30:02Z urn:sha1:b1286f4e9ac14c8973140b338b4d3c5691264d3b Pull ARM updates from Russell King: "Here's the updates for ARM for this merge window, which cover quite a variety of areas. There's a bunch of patch series from Will tackling various bugs like the PROT_NONE handling, ASID allocation, cluster boot protocol and ASID TLB tagging updates. We move to a build-time sorted exception table rather than doing the sorting at run-time, add support for the secure computing filter, and some updates to the perf code. We also have sorted out the placement of some headers, fixed some build warnings, fixed some hotplug problems with the per-cpu TWD code." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (73 commits) ARM: 7594/1: Add .smp entry for REALVIEW_EB ARM: 7599/1: head: Remove boot-time HYP mode check for v5 and below ARM: 7598/1: net: bpf_jit_32: fix sp-relative load/stores offsets. ARM: 7595/1: syscall: rework ordering in syscall_trace_exit ARM: 7596/1: mmci: replace readsl/writesl with ioread32_rep/iowrite32_rep ARM: 7597/1: net: bpf_jit_32: fix kzalloc gfp/size mismatch. ARM: 7593/1: nommu: do not enable DCACHE_WORD_ACCESS when !CONFIG_MMU ARM: 7592/1: nommu: prevent generation of kernel unaligned memory accesses ARM: 7591/1: nommu: Enable the strict alignment (CR_A) bit only if ARCH < v6 ARM: 7590/1: /proc/interrupts: limit the display of IPIs to online CPUs only ARM: 7587/1: implement optimized percpu variable access ARM: 7589/1: integrator: pass the lm resource to amba ARM: 7588/1: amba: create a resource parent registrator ARM: 7582/2: rename kvm_seq to vmalloc_seq so to avoid confusion with KVM ARM: 7585/1: kernel: fix nr_cpu_ids check in DT logical map init ARM: 7584/1: perf: fix link error when CONFIG_HW_PERF_EVENTS is not selected ARM: gic: use a private mapping for CPU target interfaces ARM: kernel: add logical mappings look-up ARM: kernel: add cpu logical map DT init in setup_arch ARM: kernel: add device tree init map function ... 2012-12-11T00:20:18Z Russell King 2012-12-11T00:20:18Z urn:sha1:0b99cb73105f0527c1c4096960796b8772343a39 2012-12-07T11:48:57Z Will Deacon 2012-12-04T11:56:44Z urn:sha1:e91b36efe51b5cbbfe5eb61a653cde5985ae8285 Recent ARMv7 toolchains assume that unaligned memory accesses will not fault and will instead be handled by the processor. For the nommu case (without an MPU), memory will be treated as strongly-ordered and therefore unaligned accesses may fault regardless of the SCTLR.A setting. This patch passes -mno-unaligned-access to GCC when compiling for nommu targets, preventing the generation of unaligned memory access in the kernel. Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 2012-12-03T18:48:44Z Grant Likely 2012-11-27T23:29:11Z urn:sha1:499cd8298628eeabf0eb5eb6525d4faa0eec80d8 The current rules have the .dtb files build in a different directory from the .dts files. The only reason for this is that it was what PowerPC has done historically. This patch changes ARM to use the generic dtb rule which builds .dtb files in the same directory as the source .dts. Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Olof Johansson <olof@lixom.net> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Grant Likely <grant.likely@secretlab.ca> [swarren: added rm command for old stale .dtb files] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Rob Herring <rob.herring@calxeda.com> 2012-11-21T19:49:45Z Olof Johansson 2012-11-21T19:49:45Z urn:sha1:3f54db784a6af9a6d53396949cbecf62edbad247 From Michal Simek: This branch depends on arm-soc devel/debug_ll_init branch because we needed Rob's "ARM: implement debug_ll_io_init()" (sha1: afaee03511ba8002b26a9c6b1fe7d6baf33eac86) patch. This branch also depends on zynq/dt branch because of previous major zynq changes. zynq/cleanup branch is subset of zynq/dt. * 'zynq/multiplatform' of git://git.monstr.eu/linux-2.6-microblaze: ARM: zynq: Remove all unused mach headers ARM: zynq: add support for ARCH_MULTIPLATFORM ARM: zynq: make use of debug_ll_io_init() ARM: zynq: remove TTC early mapping ARM: zynq: add clk binding support to the ttc ARM: zynq: use zynq clk bindings clk: Add support for fundamental zynq clks ARM: zynq: dts: split up device tree ARM: zynq: Allow UART1 to be used as DEBUG_LL console. ARM: zynq: dts: add description of the second uart ARM: zynq: move arm-specific sys_timer out of ttc zynq: move static peripheral mappings zynq: remove use of CLKDEV_LOOKUP zynq: use pl310 device tree bindings zynq: use GIC device tree bindings Add/add conflict in arch/arm/Kconfig.debug. Signed-off-by: Olof Johansson <olof@lixom.net> 2012-11-21T06:14:59Z Olof Johansson 2012-11-21T06:14:59Z urn:sha1:5ffd785402c295328d3866d9f8630152f51d332a From Maxime Ripard: Allwinner SoC support for 3.8 * tag 'tags/sunxi-support-for-3.8' of git://github.com/mripard/linux: ARM: sunxi: Add entry to MAINTAINERS ARM: sunxi: Add device tree for the A13 and the Olinuxino board ARM: sunxi: Add earlyprintk support ARM: sunxi: Add basic support for Allwinner A1x SoCs irqchip: sunxi: Add irq controller driver clocksource: sunxi: Add Allwinner A1X Timer Driver clk: sunxi: Add dummy fixed rate clock for Allwinner A1X SoCs Signed-off-by: Olof Johansson <olof@lixom.net> 2012-11-20T06:39:07Z Christian Daudt 2012-11-19T17:46:10Z urn:sha1:8ac49e0485bb79223a111b366a3b1f5ec9148729 In order to start upstreaming Broadcom SoC support, create a starting hierarchy, arch and dts files. The first support SoC family that is planned is the BCM281XX (BCM11130/11140/11351/28145/28155) family of dual A9 mobile SoC cores. This code is just the skeleton code for get the machine upstreamed. It has been made MULTIPLATFORM compatible. Next steps ---------- Upstream a basic set of drivers - sufficient for a console boot to ramdisk. These will includer timer, gpio, i2c drivers. After this basic set, we will proceed with a more comprehensive set of drivers for the 281XX SoC family. v2 patch mods -------- - Remove l2x0_of_init call as there were problems with the code. A separate patch will be submitted with cache init code - Rename capri files and refs to bcm281xx-based names - Add bcm281xx binding doc - various misc cleanups v3 patch mods ------------- - Remove extra #include lines - Remove remaining references to capri - dt uart chipset string added - cleaned up chip # references v4 patch mods ------------- - swap order of compatible definitions for uart - fix typo v5 patch mods ------------- - Rename bcm281xx to bcm11351 in dts+code, leaving references to bcm281xx only in help+comments. v6 patch mods ------------- - fix typo in uart 'compatible' string Signed-off-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>