kernel.git/arch/arc/mm, branch linux-5.0.y

ARC: PAE40: don't panic and instead turn off hw ioc

2019-05-25T16:22:23Z

[ Upstream commit 99bd5fcc505d65ea9c60619202f0b2d926eabbe9 ] HSDK currently panics when built for HIGHMEM/ARC_HAS_PAE40 because ioc is enabled with default which doesn't work for the 2 non contiguous memory nodes. So get PAE working by disabling ioc instead. Tested with !PAE40 by forcing @ioc_enable=0 and running the glibc testsuite over ssh Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin

ARC: mm: do_page_fault fixes #1: relinquish mmap_sem if signal arrives while handle_mm_fault

2019-01-18T00:24:39Z

do_page_fault() forgot to relinquish mmap_sem if a signal came while handling handle_mm_fault() - due to say a ctl+c or oom etc. This would later cause a deadlock by acquiring it twice. This came to light when running libc testsuite tst-tls3-malloc test but is likely also the cause for prior seen LTP failures. Using lockdep clearly showed what the issue was. | # while true; do ./tst-tls3-malloc ; done | Didn't expect signal from child: got `Segmentation fault' | ^C | ============================================ | WARNING: possible recursive locking detected | 4.17.0+ #25 Not tainted | -------------------------------------------- | tst-tls3-malloc/510 is trying to acquire lock: | 606c7728 (&mm->mmap_sem){++++}, at: __might_fault+0x28/0x5c | |but task is already holding lock: |606c7728 (&mm->mmap_sem){++++}, at: do_page_fault+0x9c/0x2a0 | | other info that might help us debug this: | Possible unsafe locking scenario: | | CPU0 | ---- | lock(&mm->mmap_sem); | lock(&mm->mmap_sem); | | *** DEADLOCK *** | ------------------------------------------------------------ What the change does is not obvious (note to myself) prior code was | do_page_fault | | down_read() <-- lock taken | handle_mm_fault <-- signal pending as this runs | if fatal_signal_pending | if VM_FAULT_ERROR | up_read | if user_mode | return <-- lock still held, this was the BUG New code | do_page_fault | | down_read() <-- lock taken | handle_mm_fault <-- signal pending as this runs | if fatal_signal_pending | if VM_FAULT_RETRY | return <-- not same case as above, but still OK since | core mm already relinq lock for FAULT_RETRY | ... | | < Now falls through for bug case above > | | up_read() <-- lock relinquished Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta

ARC: adjust memblock_reserve of kernel memory

2019-01-17T22:38:00Z

In setup_arch_memory we reserve the memory area wherein the kernel is located. Current implementation may reserve more memory than it actually required in case of CONFIG_LINUX_LINK_BASE is not equal to CONFIG_LINUX_RAM_BASE. This happens because we calculate start of the reserved region relatively to the CONFIG_LINUX_RAM_BASE and end of the region relatively to the CONFIG_LINUX_RAM_BASE. For example in case of HSDK board we wasted 256MiB of physical memory: ------------------->8------------------------------ Memory: 770416K/1048576K available (5496K kernel code, 240K rwdata, 1064K rodata, 2200K init, 275K bss, 278160K reserved, 0K cma-reserved) ------------------->8------------------------------ Fix that. Fixes: 9ed68785f7f2b ("ARC: mm: Decouple RAM base address from kernel link addr") Cc: stable@vger.kernel.org #4.14+ Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta

arch/arc/mm/fault.c: remove caller signal_pending_branch predictions

2019-01-04T21:13:48Z

This is already done for us internally by the signal machinery. Link: http://lkml.kernel.org/r/20181116002713.8474-4-dave@stgolabs.net Signed-off-by: Davidlohr Bueso Reviewed-by: Andrew Morton Cc: Vineet Gupta Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2018-12-29T04:08:34Z

Pull Devicetree updates from Rob Herring: "The biggest highlight here is the start of using json-schema for DT bindings. Being able to validate bindings has been discussed for years with little progress. - Initial support for DT bindings using json-schema language. This is the start of converting DT bindings from free-form text to a structured format. - Reworking of initrd address initialization. This moves to using the phys address instead of virt addr in the DT parsing code. This rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary rebuilding of lots of files. - Fix stale phandle entries in phandle cache - DT overlay validation improvements. This exposed several memory leak bugs which have been fixed. - Use node name and device_type helper functions in DT code - Last remaining conversions to using %pOFn printk specifier instead of device_node.name directly - Create new common RTC binding doc and move all trivial RTC devices out of trivial-devices.txt. - New bindings for Freescale MAG3110 magnetometer, Cadence Sierra PHY, and Xen shared memory - Update dtc to upstream version v1.4.7-57-gf267e674d145" * tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits) of: __of_detach_node() - remove node from phandle cache of: of_node_get()/of_node_put() nodes held in phandle cache gpio-omap.txt: add reg and interrupts properties dt-bindings: mrvl,intc: fix a trivial typo dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110 dt-bindings: Convert trivial-devices.txt to json-schema dt-bindings: arm: mrvl: amend Browstone compatible string dt-bindings: arm: Convert Tegra board/soc bindings to json-schema dt-bindings: arm: Convert ZTE board/soc bindings to json-schema dt-bindings: arm: Add missing Xilinx boards dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema dt-bindings: arm: Convert VIA board/soc bindings to json-schema dt-bindings: arm: Convert ST STi board/soc bindings to json-schema dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema dt-bindings: arm: Convert QCom board/soc bindings to json-schema dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema dt-bindings: arm: Convert Altera board/soc bindings to json-schema ...

Merge tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping

2018-12-28T22:12:21Z

Pull DMA mapping updates from Christoph Hellwig: "A huge update this time, but a lot of that is just consolidating or removing code: - provide a common DMA_MAPPING_ERROR definition and avoid indirect calls for dma_map_* error checking - use direct calls for the DMA direct mapping case, avoiding huge retpoline overhead for high performance workloads - merge the swiotlb dma_map_ops into dma-direct - provide a generic remapping DMA consistent allocator for architectures that have devices that perform DMA that is not cache coherent. Based on the existing arm64 implementation and also used for csky now. - improve the dma-debug infrastructure, including dynamic allocation of entries (Robin Murphy) - default to providing chaining scatterlist everywhere, with opt-outs for the few architectures (alpha, parisc, most arm32 variants) that can't cope with it - misc sparc32 dma-related cleanups - remove the dma_mark_clean arch hook used by swiotlb on ia64 and replace it with the generic noncoherent infrastructure - fix the return type of dma_set_max_seg_size (Niklas Söderlund) - move the dummy dma ops for not DMA capable devices from arm64 to common code (Robin Murphy) - ensure dma_alloc_coherent returns zeroed memory to avoid kernel data leaks through userspace. We already did this for most common architectures, but this ensures we do it everywhere. dma_zalloc_coherent has been deprecated and can hopefully be removed after -rc1 with a coccinelle script" * tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping: (73 commits) dma-mapping: fix inverted logic in dma_supported dma-mapping: deprecate dma_zalloc_coherent dma-mapping: zero memory returned from dma_alloc_* sparc/iommu: fix ->map_sg return value sparc/io-unit: fix ->map_sg return value arm64: default to the direct mapping in get_arch_dma_ops PCI: Remove unused attr variable in pci_dma_configure ia64: only select ARCH_HAS_DMA_COHERENT_TO_PFN if swiotlb is enabled dma-mapping: bypass indirect calls for dma-direct vmd: use the proper dma_* APIs instead of direct methods calls dma-direct: merge swiotlb_dma_ops into the dma_direct code dma-direct: use dma_direct_map_page to implement dma_direct_map_sg dma-direct: improve addressability error reporting swiotlb: remove dma_mark_clean swiotlb: remove SWIOTLB_MAP_ERROR ACPI / scan: Refactor _CCA enforcement dma-mapping: factor out dummy DMA ops dma-mapping: always build the direct mapping code dma-mapping: move dma_cache_sync out of line dma-mapping: move various slow path functions out of line ...

dma-mapping: zero memory returned from dma_alloc_*

2018-12-20T07:13:52Z

If we want to map memory from the DMA allocator to userspace it must be zeroed at allocation time to prevent stale data leaks. We already do this on most common architectures, but some architectures don't do this yet, fix them up, either by passing GFP_ZERO when we use the normal page allocator or doing a manual memset otherwise. Signed-off-by: Christoph Hellwig Acked-by: Geert Uytterhoeven [m68k] Acked-by: Sam Ravnborg [sparc]

dma-mapping: bypass indirect calls for dma-direct

2018-12-13T20:06:18Z

Avoid expensive indirect calls in the fast path DMA mapping operations by directly calling the dma_direct_* ops if we are using the directly mapped DMA operations. Signed-off-by: Christoph Hellwig Acked-by: Jesper Dangaard Brouer Tested-by: Jesper Dangaard Brouer Tested-by: Tony Luck

arch: Move initrd= parsing into do_mounts_initrd.c

2018-11-26T21:50:45Z

ARC, ARM, ARM64 and Unicore32 are all capable of parsing the "initrd=" command line parameter to allow specifying the physical address and size of an initrd. Move that parsing into init/do_mounts_initrd.c such that we no longer duplicate that logic. Signed-off-by: Florian Fainelli Reviewed-by: Mike Rapoport Signed-off-by: Rob Herring

ARC: mm: fix uninitialised signal code in do_page_fault

2018-11-12T18:38:27Z

Commit 15773ae938d8 ("signal/arc: Use force_sig_fault where appropriate") introduced undefined behaviour by leaving si_code unitiailized and leaking random kernel values to user space. Fixes: 15773ae938d8 ("signal/arc: Use force_sig_fault where appropriate") Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta