kernel.git/arch/arc/Kconfig, branch linux-4.12.y

Revert "ARCv2: Allow enabling PAE40 w/o HIGHMEM"

2017-05-05T20:49:41Z

This reverts commit 7cab91b87dd8eeee5911ec34be8bb0288ebba18b. Now when we have a real hardware platform with PAE40 enabled (here I mean axs103 with firmware v1.2) and 1 Gb of DDR mapped to 0x1_a000_0000-0x1_ffff_ffff we're really targeting memory above 4Gb when PAE40 is enabled. This in its turn requires HIGHMEM to be enabled otherwise user won't see any difference with enabling PAE in kernel configuration as only lowmem will be used anyways. Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta

ARCv2: entry: save Accumulator register pair (r58:59) if present

2017-04-20T22:37:49Z

Accumulator is present in configs with FPU and/or DSP MPY (mpy > 6) Instead of doing this in pt_regs (and thus every kernel entry/exit), this could have been done in context switch (and for user task only) as currently kernel doesn't clobber these registers for its own accord. However we will soon start using 64-bit multiply instructions for kernel which can clobber these. Also gcc folks also plan to start using these as GPRs, hence better to always save/restore them Signed-off-by: Vineet Gupta

ARC: [plat-*] ARC_HAS_COH_CACHES no longer relevant

2017-02-06T17:37:57Z

A typical SMP system expects cache coherency. Initial NPS platform support was slated to be SMP w/o cache coherency. However it seems the platform now selects that option, so there is no point in keeping it around. Signed-off-by: Vineet Gupta

ARCv2: intc: Rework the build time irq count information

2017-02-06T17:37:57Z

Currently Kconfig knob ARC_NUMBER_OF_INTERRUPTS is used as indicator of hard irq count. But it is flawed that it doesn't affect - NR_IRQS : for number of virtual interrupts - NR_CPU_IRQS : for number of hardware interrupts Moreover the actual hardware irq count might still not be same as ARC_NUMBER_OF_INTERRUPTS. So use the information availble in the Build Configuration Registers and get rid of the Kconfig option. We still need "some" build time info about irq count to set up sufficient number of vector table entries. This is done with a sufficiently large NR_CPU_IRQS which will eventually be used soley for that purpose (subsequent patches will remove its usage elsewhere) So to summarize what this patch does: * NR_CPU_IRQS defines a maximum number of hardware interrupts. * Remove ARC_NUMBER_OF_INTERRUPTS option and create interrupts table for all possible hardware interrupts. * Increase a maximum number of virtual IRQs to 512. ARCv2 can support 240 interrupts in the core interrupts controllers and 128 interrupts in IDU. Thus 512 virtual IRQs must be enough for most configurations of boards. This patch leads to NR_CPU_IRQS in 2 places, to reduce the overall churn. The next patch will remove the 2nd definition anyways. Signed-off-by: Yuriy Kolerov Signed-off-by: Vineet Gupta [vgupta: reworked the changelog a bit]

ARC: module: Fix !CONFIG_ARC_DW2_UNWIND builds

2017-01-18T19:17:44Z

commit d65283f7b695b5 added mod->arch.secstr under CONFIG_ARC_DW2_UNWIND, but used it unconditionally which broke builds when the option was disabled. Fix that by adjusting the #ifdef guard. And while at it add a missing guard (for unwinder) in module.c as well Reported-by: Waldemar Brodkorb Cc: stable@vger.kernel.org #4.9 Fixes: d65283f7b695b5 ("ARC: module: elide loop to save reference to .eh_frame") Tested-by: Anton Kolesov Reviewed-by: Alexey Brodkin [abrodkin: provided fixlet to Kconfig per failure in allnoconfig build] Signed-off-by: Vineet Gupta

ARC: enable SG chaining

2016-12-19T02:45:32Z

Signed-off-by: Vladimir Kondratiev Signed-off-by: Vineet Gupta

clocksource: import ARC timer driver

2016-11-30T19:54:25Z

This adds support for - CONFIG_ARC_TIMERS : legacy 32-bit TIMER0 and TIMER1 which count UP from @CNT to @LIMIT, before optionally triggering an interrupt. These are programmed using ARC auxiliary register interface. These are present in all ARC cores (ARC700 and ARC HS38) TIMER0 serves as clockevent for all ARC linux builds. TIMER1 is used for clocksource in arc700 builds. - CONFIG_ARC_TIMERS_64BIT: 64-bit counters, RTC and GFRC found in ARC HS38 cores. These are independnet IP blocks with different programming model respectively. Link: http://lkml.kernel.org/r/20161111231132.GA4186@mai Acked-by: Daniel Lezcano Signed-off-by: Vineet Gupta

ARC: timer: gfrc, rtc: build under same option (64-bit timers)

2016-11-30T19:54:25Z

The original distinction was done as they were developed at different times and primarily because they are specific to UP (RTC) and SMP (GFRC). But given that driver handles that at runtime, (i.e. not allowing RTC as clocksource in SMP), we can simplify things a bit. Signed-off-by: Vineet Gupta

ARC: mm: retire ARC_DBG_TLB_MISS_COUNT...

2016-10-28T17:10:28Z

... given that we have perf counters abel to do the same thing non intrusively Signed-off-by: Vineet Gupta

ARC: [build] Support gz, lzma compressed uImage

2016-10-16T22:49:07Z

Add support for lzma compressed uImage. Support for gzip was already available but could not be enabled because we were missing CONFIG_HAVE_KERNEL_GZIP in arch/arc/Kconfig. Signed-off-by: Daniel Mentz Cc: linux-snps-arc@lists.infradead.org Cc: Vineet Gupta Signed-off-by: Vineet Gupta