kernel.git/Documentation/networking/devlink/ice.rst, branch linux-5.8.y

ice: report netlist version in .info_get

2020-05-22T05:10:03Z

The flash memory for the ice hardware contains a block of information used for link management called the Netlist module. As this essentially represents another section of firmware, add its version information to the output of the driver's .info_get handler. This includes both a version and the first few bytes of a hash of the module contents. fw.netlist -> the version information extracted from the netlist module fw.netlist.build-> first 4 bytes of the hash of the contents, similar to fw.mgmt.build Signed-off-by: Jacob Keller Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher

ice: cleanup language in ice.rst for fw.app

2020-05-01T22:30:24Z

The documentation for the ice driver around "fw.app" has a spelling mistake in variation. Additionally, the language of "shall have a unique name" sounds like a requirement. Reword this to read more like a description or property. Reported-by: Benjamin Fisher Signed-off-by: Jacob Keller Acked-by: Jakub Kicinski Acked-by: Jeff Kirsher Signed-off-by: David S. Miller

devlink: don't wrap commands in rST shell blocks

2020-03-30T05:08:45Z

The devlink-region.rst and ice-region.rst documentation files wrapped some lines within shell code blocks due to being longer than 80 lines. It was pointed out during review that wrapping these lines shouldn't be done. Fix these two rST files and remove the line wrapping on these shell command examples. Reported-by: Jiri Pirko Signed-off-by: Jacob Keller Signed-off-by: David S. Miller

ice: add a devlink region for dumping NVM contents

2020-03-27T02:39:26Z

Add a devlink region for exposing the device's Non Volatime Memory flash contents. Support the recently added .snapshot operation, enabling userspace to request a snapshot of the NVM contents via DEVLINK_CMD_REGION_NEW. Signed-off-by: Jacob Keller Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller

ice: add board identifier info to devlink .info_get

2020-03-21T08:02:19Z

Export a unique board identifier using "board.id" for devlink's .info_get command. Obtain this by reading the NVM for the PBA identification string. Signed-off-by: Jacob Keller Reviewed-by: Jesse Brandeburg Acked-by: Jakub Kicinski Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher

ice: add basic handler for devlink .info_get

2020-03-21T08:00:32Z

The devlink .info_get callback allows the driver to report detailed version information. The following devlink versions are reported with this initial implementation: "fw.mgmt" -> The version of the firmware that controls PHY, link, etc "fw.mgmt.api" -> API version of interface exposed over the AdminQ "fw.mgmt.build" -> Unique build id of the source for the management fw "fw.undi" -> Version of the Option ROM containing the UEFI driver "fw.psid.api" -> Version of the NVM image format. "fw.bundle_id" -> Unique identifier for the combined flash image. "fw.app.name" -> The name of the active DDP package. "fw.app" -> The version of the active DDP package. With this, devlink dev info can report at least as much information as is reported by ETHTOOL_GDRVINFO. Compare the output from ethtool vs from devlink: $ ethtool -i ens785s0 driver: ice version: 0.8.1-k firmware-version: 0.80 0x80002ec0 1.2581.0 expansion-rom-version: bus-info: 0000:3b:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: yes $ devlink dev info pci/0000:3b:00.0 pci/0000:3b:00.0: driver ice serial number 00-01-ab-ff-ff-ca-05-68 versions: running: fw.mgmt 2.1.7 fw.mgmt.api 1.5 fw.mgmt.build 0x305d955f fw.undi 1.2581.0 fw.psid.api 0.80 fw.bundle_id 0x80002ec0 fw.app.name ICE OS Default Package fw.app 1.3.1.0 More pieces of information can be displayed, each version is kept separate instead of munged together, and each version has an identifier which comes with associated documentation. Signed-off-by: Jacob Keller Acked-by: Jakub Kicinski Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher