kernel.git/Documentation/networking/device_drivers/ethernet/intel, branch linux-6.4.y

Documentation/eth/intel: Remove references to SourceForge

2023-03-30T16:35:04Z

The out-of-tree driver is hosted on SourceForge, as this does not apply to the kernel driver remove references to it. Also do some minor formatting changes around this section. Suggested-by: Jesse Brandeburg Signed-off-by: Tony Nguyen Reviewed-by: Jesse Brandeburg

Documentation/eth/intel: Update address for driver support

2023-03-30T16:34:59Z

Update the email address for support to use Intel Wired LAN, the mailing list used for kernel development. Suggested-by: Jesse Brandeburg Signed-off-by: Tony Nguyen Reviewed-by: Jesse Brandeburg

docs: networking: document NAPI

2023-03-24T02:47:40Z

Add basic documentation about NAPI. We can stop linking to the ancient doc on the LF wiki. Link: https://lore.kernel.org/all/20230315223044.471002-1-kuba@kernel.org/ Reviewed-by: Bagas Sanjaya Reviewed-by: Toke Høiland-Jørgensen Acked-by: Pavel Pisa # for ctucanfd-driver.rst Reviewed-by: Tony Nguyen Reviewed-by: Florian Fainelli Reviewed-by: Stephen Hemminger Reviewed-by: Randy Dunlap Link: https://lore.kernel.org/r/20230322053848.198452-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

ixgb: Remove ixgb driver

2023-03-19T10:51:07Z

There are likely no users of this driver as the hardware has been discontinued since 2010. Remove the driver and all references to it in documentation. Suggested-by: Jakub Kicinski Signed-off-by: Tony Nguyen Acked-by: Jesse Brandeburg Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-02-02T22:49:55Z

net/core/gro.c 7d2c89b32587 ("skb: Do mix page pool and page referenced frags in GRO") b1a78b9b9886 ("net: add support for ipv4 big tcp") https://lore.kernel.org/all/20230203094454.5766f160@canb.auug.org.au/ Signed-off-by: Jakub Kicinski

ice: Fix broken link in ice NAPI doc

2023-01-27T19:32:18Z

Current link for NAPI documentation in ice driver doesn't work - it returns 404. Update the link to the working one. Signed-off-by: Michal Wilczynski Acked-by: Jesse Brandeburg Signed-off-by: Tony Nguyen

ice: use GNSS subsystem instead of TTY

2023-01-20T13:27:17Z

Previously support for GNSS was implemented as a TTY driver, it allowed to access GNSS receiver on /dev/ttyGNSS_. Use generic GNSS subsystem API instead of implementing own TTY driver. The receiver is accessible on /dev/gnss. In case of multiple receivers in the OS, correct device can be found by enumerating either: - /sys/class/net//device/gnss/ - /sys/class/gnss/gnss/device/ Using GNSS subsystem is superior to implementing own TTY driver, as the GNSS subsystem was designed solely for this purpose. It also implements TTY driver but in a common and defined way. From user perspective, there is no difference in communicating with a device, except new path to the device shall be used. The device will provide same information to the userspace as the old one, and can be used in the same way, i.e.: old # gpsmon /dev/ttyGNSS_2100_0 new # gpsmon /dev/gnss0 There is no other impact on userspace tools. User expecting onboard GNSS receiver support is required to enable CONFIG_GNSS=y/m in kernel config. Reviewed-by: Alexander Lobakin Signed-off-by: Karol Kolacinski Signed-off-by: Michal Michalik Signed-off-by: Arkadiusz Kubalewski Tested-by: Gurucharan G (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Acked-by: Greg Kroah-Hartman Signed-off-by: David S. Miller

ice: add write functionality for GNSS TTY

2022-07-21T20:25:17Z

Add the possibility to write raw bytes to the GNSS module through the first TTY device. This allows user to configure the module. Create a second read-only TTY device. Signed-off-by: Karol Kolacinski Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen

ixgbe: Document how to enable NBASE-T support

2021-12-15T19:09:29Z

Commit a296d665eae1 ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support") introduced suppression of the advertisement of NBASE-T speeds by default, according to Todd Fujinaka to accommodate customers with network switches which could not cope with advertised NBASE-T speeds, as posted in the E1000-devel mailing list: https://sourceforge.net/p/e1000/mailman/message/37106269/ However, the suppression was not documented at all, nor was how to enable NBASE-T support. Properly document the NBASE-T suppression and how to enable NBASE-T support. Fixes: a296d665eae1 ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support") Reported-by: Robert Schlabbach Signed-off-by: Robert Schlabbach Signed-off-by: Tony Nguyen

Doc: networking: Fox a typo in ice.rst

2021-09-21T10:01:25Z

This patch fixes a spelling typo in ice.rst Signed-off-by: Masanari Iida Signed-off-by: David S. Miller