kernel.git/Documentation/devicetree/bindings/video, branch linux-4.0.y

Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-02-17T17:36:52Z

Pull ARM SoC DT updates from Olof Johansson: "DT changes continue to be the bulk of our merge window contents. We continue to have a large set of changes across the board as new platforms and drivers are added. Some of the new platforms are: - Alphascale ASM9260 - Marvell Armada 388 - CSR Atlas7 - TI Davinci DM816x - Hisilicon HiP01 - ST STiH418 There have also been some sweeping changes, including relicensing of DTS contents from GPL to GPLv2+/X11 so that the same files can be reused in other non-GPL projects more easily. There's also been changes to the DT Makefile to make it a little less conflict-ridden and churny down the road" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits) ARM: dts: Add PPMU node for exynos4412-trats2 ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato ARM: dts: Add PPMU dt node for exynos4 and exynos4210 ARM: dts: Add PPMU dt node for exynos3250 ARM: dts: add mipi dsi device node for exynos4415 ARM: dts: add fimd device node for exynos4415 ARM: dts: Add syscon phandle to the video-phy node for Exynos4 ARM: dts: Add sound nodes for exynos4412-trats2 ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2 ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi ARM: dts: Add max77693 charger node for exynos4412-trats2 ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2 ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2 ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2 ARM: dts: am57xx-beagle-x15: Fix USB2 mode ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB ARM: dts: dra72-evm: Add extcon nodes for USB ARM: dts: dra7-evm: Add extcon nodes for USB ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb ...

Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

2015-02-16T23:48:00Z

Pull drm updates from Dave Airlie: "This is the main drm pull, it has a shared branch with some alsa crossover but everything should be acked by relevant people. New drivers: - ATMEL HLCDC driver - designware HDMI core support (used in multiple SoCs). core: - lots more atomic modesetting work, properties and atomic ioctl (hidden under option) - bridge rework allows support for Samsung exynos chromebooks to work finally. - some more panels supported i915: - atomic plane update support - DSI uses shared DSI infrastructure - Skylake basic support is all merged now - component framework used for i915/snd-hda interactions - write-combine cpu memory mappings - engine init code refactored - full ppgtt enabled where execlists are enabled. - cherryview rps/gpu turbo and pipe CRC support. radeon: - indirect draw support for evergreen/cayman - SMC and manual fan control for SI/CI - Displayport audio support amdkfd: - SDMA usermode queue support - replace suballocator usage with more suitable one - rework for allowing interfacing to more than radeon nouveau: - major renaming in prep for later splitting work - merge arm platform driver into nouveau - GK20A reclocking support msm: - conversion to atomic modesetting - YUV support for mdp4/5 - eDP support - hw cursor for mdp5 tegra: - conversion to atomic modesetting - better suspend/resume support for child devices rcar-du: - interlaced support imx: - move to using dw_hdmi shared support - mode_fixup support sti: - DVO support - HDMI infoframe support exynos: - refactoring and cleanup, removed lots of internal unnecessary abstraction - exynos7 DECON display controller support Along with the usual bunch of fixes, cleanups etc" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (724 commits) drm/radeon: fix voltage setup on hawaii drm/radeon/dp: Set EDP_CONFIGURATION_SET for bridge chips if necessary drm/radeon: only enable kv/kb dpm interrupts once v3 drm/radeon: workaround for CP HW bug on CIK drm/radeon: Don't try to enable write-combining without PAT drm/radeon: use 0-255 rather than 0-100 for pwm fan range drm/i915: Clamp efficient frequency to valid range drm/i915: Really ignore long HPD pulses on eDP drm/exynos: Add DECON driver drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRL drm/i915: Insert a command barrier on BLT/BSD cache flushes drm/i915: Drop vblank wait from intel_dp_link_down drm/exynos: fix NULL pointer reference drm/exynos: remove exynos_plane_dpms drm/exynos: remove mode property of exynos crtc drm/exynos: Remove exynos_plane_dpms() call with no effect drm/i915: Squelch overzealous uncore reset WARN_ON drm/i915: Take runtime pm reference on hangcheck_info drm/i915: Correct the IOSF Dev_FN field for IOSF transfers drm/exynos: fix DMA_ATTR_NO_KERNEL_MAPPING usage ...

drm/exynos: Add DECON driver

2015-02-11T11:27:08Z

This patch is based on exynos-drm-next branch of Inki Dae's tree at: git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git DECON(Display and Enhancement Controller) is the new IP in exynos7 SOC for generating video signals using pixel data. DECON driver can be used to drive 2 different interfaces on Exynos7: DECON-INT(video controller) and DECON-EXT(Mixer for HDMI) The existing FIMD driver code was used as a template to create DECON driver. Only DECON-INT is supported as of now, and DECON-EXT support will be added later. The current version of the driver supports video mode displays. Changelog v2: - Change config name, DRM_EXYNOS_DECON to DRM_EXYNOS7_DECON. Signed-off-by: Akshu Agrawal Signed-off-by: Ajay Kumar Signed-off-by: Inki Dae

drm/exynos: add support for 'hdmi' clock

2015-02-07T07:38:40Z

Mixed need to have hdmi clock enabled to properly perform power on/off sequences, so add handling of this clock directly to the mixer driver. Dependency between hdmi clock and mixer module has been observed on Exynos4 based boards. Suggested-by: Andrzej Hajda Reviewed-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas Signed-off-by: Marek Szyprowski Signed-off-by: Inki Dae

Doc/DT: Add DT binding doc for DRA7xx DSS

2015-02-04T10:32:04Z

Add device tree binding documentation for DRA7xx display subsystem. Signed-off-by: Tomi Valkeinen Cc: devicetree@vger.kernel.org

Documentation: bridge: Add documentation for ps8622 DT properties

2015-01-28T07:47:30Z

Add documentation for DT properties supported by ps8622/ps8625 eDP-LVDS converter. Signed-off-by: Ajay Kumar Acked-by: Inki Dae Tested-by: Rahul Sharma Tested-by: Javier Martinez Canillas Tested-by: Gustavo Padovan Tested-by: Sjoerd Simons Signed-off-by: Thierry Reding

Documentation: drm: bridge: move to video/bridge

2015-01-28T07:47:30Z

Move drm/bridge documentation to video/bridge. Also, add proper documentation for gpios used by ptn3460. Signed-off-by: Ajay Kumar Acked-by: Inki Dae Tested-by: Rahul Sharma Tested-by: Javier Martinez Canillas Tested-by: Gustavo Padovan Tested-by: Sjoerd Simons Signed-off-by: Thierry Reding

drm/exynos: dp: support drm_bridge

2015-01-28T07:47:29Z

Modify driver to support drm_bridge. Signed-off-by: Ajay Kumar Signed-off-by: Inki Dae Tested-by: Rahul Sharma Tested-by: Javier Martinez Canillas Tested-by: Gustavo Padovan Tested-by: Sjoerd Simons Signed-off-by: Thierry Reding

ARM: dts: convert to generic power domain bindings for exynos DT

2015-01-24T04:24:05Z

This patch replaces all custom samsung,power-domain dt properties with generic power domain bindings and updates documentation Samsung's devices referring to old binding. Suggested-by: Kevin Hilman Signed-off-by: Marek Szyprowski Reviewed-by: Javier Martinez Canillas [javier.martinez@collabora.co.uk: tested on the Exynos5800 Peach Pi Chromebook] Tested-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim

Merge tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux into drm-next

2015-01-21T00:17:16Z

imx-drm mode fixup support, imx-hdmi bridge conversion and imx-drm cleanup - Implement mode_fixup for a DI vertical timing limitation - Use generic DRM OF helpers in DRM core - Convert imx-hdmi to dw_hdmi drm_bridge and add rockchip driver - Add DC use counter to fix multi-display support - Simplify handling of DI clock flags - A few small fixes and cleanup * tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux: (26 commits) imx-drm: core: handling of DI clock flags to ipu_crtc_mode_set() gpu: ipu-di: Switch to DIV_ROUND_CLOSEST for DI clock divider calc gpu: ipu-v3: Use videomode in struct ipu_di_signal_cfg imx-drm: encoder prepare/mode_set must use adjusted mode imx-drm: ipuv3-crtc: Implement mode_fixup drm_modes: add drm_display_mode_to_videomode gpu: ipu-di: remove some non-functional code gpu: ipu-di: Add ipu_di_adjust_videomode() drm: rockchip: export functions needed by rockchip dw_hdmi bridge driver drm: bridge/dw_hdmi: request interrupt only after initializing the mutes drm: bridge/dw_hdmi: add rockchip rk3288 support dt-bindings: Add documentation for rockchip dw hdmi drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done drm: bridge/dw_hdmi: add mode_valid support drm: bridge/dw_hdmi: add support for multi-byte register width access dt-bindings: add document for dw_hdmi drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi drm: imx: imx-hdmi: split phy configuration to platform driver drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode ...