Hosts the 0x221E linux distro kernel. https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-4.9.y 2017-12-14T08:28:23Z 2017-12-14T08:28:23Z Johan Hovold 2017-11-09T17:07:17Z urn:sha1:c31bfe7de24387dfc0b4c3c1a34f4f8d1554c907 [ Upstream commit f42ae7b0540937e00fe005812997f126aaac4bc2 ] The USB hub port-number range for USB 2.0 is 1-255 and not 1-31 which reflects an arbitrary limit set by the current Linux implementation. Note that for USB 3.1 hubs the valid range is 1-15. Increase the documented valid range in the binding to 255, which is the maximum allowed by the specifications. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2017-04-12T10:41:19Z Felipe Balbi 2017-04-04T19:32:24Z urn:sha1:7bdf7bebbbedb2bfe1dc3bcad71acb77bf660113 [ Upstream commit 21939f003ad09355d9c975735750bb22aa37d8de ] In case 'quirk-broken-port-ped' property is passed in via device property, we should enable the corresponding BROKEN_PED quirk flag for XHCI core. [rogerq@ti.com] Updated code from platform data to device property and added DT binding. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2016-10-18T11:21:43Z John Youn 2016-10-18T00:36:28Z urn:sha1:a1aa8cf6471b17c0fa7132ea5eeef0ae07ca07cd This binding was deprecated due to commit aa381a7259c3 ("usb: dwc2: gadget: fix TX FIFO size and address initialization"). However that commit is now reverted, so also revert this commit. The binding is valid and shouldn't be deprecated. This reverts commit 65e1ff7f4b5b ("Documentation: devicetree: dwc2: Deprecate g-tx-fifo-size"). Signed-off-by: John Youn <johnyoun@synopsys.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> 2016-10-08T04:34:49Z Linus Torvalds 2016-10-08T04:34:49Z urn:sha1:c913fc4146ba7c280e074558d0a461e5c6f07c8a Pull ARM SoC late DT updates from Arnd Bergmann: "These updates have been kept in a separate branch mostly because they rely on updates to the respective clk drivers to keep the shared header files in sync. - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an automotive SoC similar to the ⅹ8a7795 chip we already support, but the dts changes rely on a clock driver change that has been merged for v4.9 through the clk tree. - The Amlogic meson-gxbb (S905) platform gains support for a few drivers merged through our tree, in particular the network and usb driver changes are required and included here, and also the clk tree changes. - The Allwinner platforms have seen a large-scale change to their clk drivers and the dts file updates must come after that. This includes the newly added Nextthing GR8 platform, which is derived from sun5i/A13. - Some integrator (arm32) changes rely on clk driver changes. - A single patch for lpc32xx has no such dependency but wasn't added until just before the merge window" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) ARM: dts: lpc32xx: add device node for IRAM on-chip memory ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03 ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board ARM: dts: sun8i: add pinmux for UART1 at PG dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC dts: sun8i-h3: add pinmux definitions for I2C0-2 dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux dts: sun8i-h3: add pinmux definitions for UART2-3 ARM: dts: sun9i: a80-optimus: Disable EHCI1 ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes ... 2016-09-15T08:38:30Z Greg Kroah-Hartman 2016-09-15T08:38:30Z urn:sha1:f21ca2c9999872da113a1fc70abb527129b72af3 Peter writes: Most of them are refine patches, only new feature is disable io watchdog for chipidea platform. 2016-09-14T18:37:50Z Greg Kroah-Hartman 2016-09-14T18:37:50Z urn:sha1:81522637485dd6ec9de4279c9714d58f884b6091 Felipe writes: usb: patches for v4.9 merge window This time around we have 92 non-merge commits. Most of the changes are in drivers/usb/gadget (40.3%) with drivers/usb/gadget/function being the most active directory (27.2%). As for UDC drivers, only dwc3 (26.5%) and dwc2 (12.7%) have really been active. The most important changes for dwc3 are better support for scatterlist and, again, throughput improvements. While on dwc2 got some minor stability fixes related to soft reset and FIFO usage. Felipe Tonello has done some good work fixing up our f_midi gadget and Tal Shorer has implemented a nice API change for our ULPI bus. Apart from these, we have our usual set of non-critical fixes, spelling fixes, build warning fixes, etc. 2016-09-14T18:18:52Z Jerome Brunet 2016-09-11T13:41:06Z urn:sha1:f94310ac076ea2cd84ff42c901e7a17382ad75f8 Add compatible strings for amlogic Meson8b and GXBB SoCs with the corresponding configuration parameters. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> 2016-09-14T02:58:13Z Li Jun 2016-07-20T08:02:41Z urn:sha1:e5b3253dcc8c6a2cb2b13916e77afe9fdfe55d27 Adding over-current-active-high to indicate the over current flag is high active as typically we use active low for over current polarity. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Acked-by: Rob Herring <robh@kernel.org> 2016-09-14T02:58:13Z Li Jun 2016-07-20T08:02:40Z urn:sha1:5de97f8bd74dd87d8856f17b585a7c221b535969 Add compatible string for imx7d-usbmisc. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> 2016-09-13T06:28:59Z Felipe Balbi 2016-09-12T18:24:58Z urn:sha1:b281dc630b41cd5d0c8600ffb3230ef9dc222b30 Add necessary compatible flag for Cavium's DWC3 so dwc3-of-simple will probe. Tested-by: Steven J. Hill <Steven.Hill@cavium.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>