kernel.git/Documentation/devicetree/bindings/ufs, branch linux-4.19.y

scsi: ufs: dt-bindings: add document for hisi-ufs

2018-07-20T01:57:39Z

add ufs node document for Hisilicon. Signed-off-by: Li Wei Reviewed-by: Rob Herring Tested-by: John Stultz Signed-off-by: Martin K. Petersen

dt-bindings: Remove leading 0x from bindings notation

2017-12-06T20:56:33Z

Improve the binding example by removing all the leading 0x to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" Converted using the following command: find Documentation/devicetree/bindings -name "*.txt" -exec sed -i -e 's/([^ ])\@0x([0-9a-f])/$1\@$2/g' {} + This is a follow up to commit 48c926cd3414 Signed-off-by: Mathieu Malaterre Signed-off-by: Rob Herring

phy: qcom-ufs: Remove -always-on property

2017-01-27T07:36:52Z

The fact that a regulator is always-on is a property of the regulator, not a specific consumer. Implementing this in the driver leads to a system behaviour that is dependent on if the Qualcomm UFS PHY was ever (partially) probed. If the specific regulator should be always on in a particular device, mark it so by specifying "regulator-always-on" in the regulator node. Reviewed-by: Vivek Gautam Reviewed-by: Subhash Jadavani Acked-by: Rob Herring Signed-off-by: Bjorn Andersson Signed-off-by: Kishon Vijay Abraham I

phy: qcom-ufs-14nm: Add new compatible for msm8996 based phy

2016-11-08T23:05:45Z

Add a new compatible string for 14nm ufs phy present on msm8996 chipset. This phy is bit different from the legacy 14nm ufs phy in terms of the clocks that are needed to be handled in the driver. Signed-off-by: Vivek Gautam Reviewed-by: Subhash Jadavani Signed-off-by: Martin K. Petersen

ufs: add TC G210 platform driver

2016-07-13T03:16:31Z

This patch adds a glue platform driver for the Synopsys G210 Test Chip. Signed-off-by: Joao Pinto Reviewed-by: Hannes Reinicke Signed-off-by: Martin K. Petersen

ufs: add UFS 2.0 to ufshcd-pltfrm bindings

2016-07-13T03:16:31Z

Add UFS 2.0 to the ufshcd-pltfrm devicetree binding. Signed-off-by: Joao Pinto Acked-by: Rob Herring Acked-by: Tomas Winkler Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen

scsi: ufs-qcom: add number of lanes per direction

2016-03-15T01:04:45Z

Different platform may have different number of lanes for the UFS link. Add parameter to device tree specifying how many lanes should be configured for the UFS link. Reviewed-by: Hannes Reinecke Acked-by: Rob Herring Signed-off-by: Gilad Broner Signed-off-by: Yaniv Gardi Signed-off-by: Martin K. Petersen

scsi: ufs: make the UFS variant a platform device

2015-11-09T23:00:02Z

This change turns the UFS variant (SCSI_UFS_QCOM) into a UFS a platform device. In order to do so a few additional changes are required: 1. The ufshcd-pltfrm is no longer serves as a platform device. Now it only serves as a group of platform APIs such as PM APIs (runtime suspend/resume, system suspend/resume etc), parsers of clocks, regulators and pm_levels from DT. 2. What used to be the old platform "probe" is now "only" a pltfrm_init() routine, that does exactly the same, but only being called by the new probe function of the UFS variant. Reviewed-by: Rob Herring Reviewed-by: Gilad Broner Signed-off-by: Yaniv Gardi Tested-by: Alim Akhtar Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen

ufs: Add freq-table-hz property for UFS device

2014-10-01T11:11:25Z

Add freq-table-hz propery for UFS device to keep track of frequencies supported by UFS clocks. Signed-off-by: Sahitya Tummala Signed-off-by: Dolev Raviv Signed-off-by: Christoph Hellwig

ufs: add voting support for host controller power

2014-10-01T11:11:20Z

Add the support for voting of the regulator powering the host controller logic. Signed-off-by: Raviv Shvili Signed-off-by: Subhash Jadavani Signed-off-by: Dolev Raviv Signed-off-by: Christoph Hellwig