kernel.git/Documentation/devicetree/bindings/soc, branch linux-4.5.y

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-01-21T02:42:30Z

Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. Some for SoC-family code under drivers/soc, but also some other driver updates that don't belong anywhere else. We also bring in the drivers/reset code through arm-soc. Some of the larger updates: - Qualcomm support for SMEM, SMSM, SMP2P. All used to communicate with other parts of the chip/board on these platforms, all proprietary protocols that don't fit into other subsystems and live in drivers/soc for now. - System bus driver for UniPhier - Driver for the TI Wakeup M3 IPC device - Power management for Raspberry PI + Again a bunch of other smaller updates and patches" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) bus: uniphier: allow only built-in driver ARM: bcm2835: clarify RASPBERRYPI_FIRMWARE dependency MAINTAINERS: Drop Kumar Gala from QCOM bus: uniphier-system-bus: add UniPhier System Bus driver ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware. drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular soc: mediatek: SCPSYS: Add regulator support MAINTAINERS: Change QCOM entries soc: qcom: smd-rpm: Add existing platform support memory/tegra: Add number of TLB lines for Tegra124 reset: hi6220: fix modular build soc: qcom: Introduce WCNSS_CTRL SMD client ARM: qcom: select ARM_CPU_SUSPEND for power management MAINTAINERS: Add rules for Qualcomm dts files soc: qcom: enable smsm/smp2p modular build serial: msm_serial: Make config tristate soc: qcom: smp2p: Qualcomm Shared Memory Point to Point soc: qcom: smsm: Add driver for Qualcomm SMSM ...

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-01-21T02:16:29Z

Pull ARM DT updates from Olof Johansson: "As usual, the bulk of this release is again DT file contents. There's a huge number of changes here, and it's challenging to give a crisp overview of just what is in here. To start with: New boards: - TI-based DM3730 from LogicPD (Torpedo) - Cosmic+ M4 (nommu) initial support (Freescale Vybrid) - Raspberry Pi 2 DT files - Watchdog on Meson8b - Veyron-mickey (ASUS Chromebit) DTS - Rockchip rk3228 SoC and eval board - Sigma Designs Tango4 Improvements: - Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files - Misc new devices for Rockchip rk3036 and rk3288 - Allwinner updates for misc SoCs and systems ... and a _large_ number of other changes across the field. Devices added to SoC DTSI and board DTS files for a number of SoC vendors, new product boards on already-supported SoCs, cleanups and refactorings of existing DTS/DTSI files and a bunch of other changes" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (469 commits) ARM: dts: compulab: add new board description ARM: versatile: add the syscon LEDs to the DT dts: vt8500: Fix errors in SDHC node for WM8505 ARM: dts: imx6q: clean up unused ipu2grp ARM: dts: silk: Add compatible property to "partitions" node ARM: dts: gose: Add compatible property to "partitions" node ARM: dts: porter: Add compatible property to "partitions" node ARM: dts: koelsch: Add compatible property to "partitions" node ARM: dts: lager: Add compatible property to "partitions" node ARM: dts: bockw: Add compatible property to "partitions" node ARM: dts: meson8b: Add watchdog node Documentation: watchdog: Add new bindings for meson8b ARM: meson: Add status LED for Odroid-C1 ARM: dts: uniphier: fix a typo in comment block ARM: bcm2835: Add the auxiliary clocks to the device tree. ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT. ARM: bcm2835: Split the DT for peripherals from the DT for the CPU ARM: realview: set up cache correctly on the PB11MPCore ARM: dts: Unify G2D device node with other devices on exynos4 ...

Merge tag 'regulator-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

2016-01-15T20:14:47Z

Pull regulator updates from Mark Brown: "Aside from a fix for a spurious warning (which caused more problems than it fixed in the fixing really) this is all driver updates, including new drivers for Dialog PV88060/90 and TI LM363x and TPS65086 devices. The qcom_smd driver has had PM8916 and PMA8084 support added" * tag 'regulator-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (36 commits) regulator: core: remove some dead code regulator: core: use dev_to_rdev regulator: lp872x: Get rid of duplicate reference to DVS GPIO regulator: lp872x: Add missing of_match in regulators descriptions regulator: axp20x: Fix GPIO LDO enable value for AXP22x regulator: lp8788: constify regulator_ops structures regulator: wm8*: constify regulator_ops structures regulator: da9*: constify regulator_ops structures regulator: mt6311: Use REGCACHE_RBTREE regulator: tps65917/palmas: Add bypass ops for LDOs with bypass capability regulator: qcom-smd: Add support for PMA8084 regulator: qcom-smd: Add PM8916 support soc: qcom: documentation: Update SMD/RPM Docs regulator: pv88090: logical vs bitwise AND typo regulator: pv88090: Fix irq leak regulator: pv88090: new regulator driver regulator: wm831x-ldo: Use platform_register/unregister_drivers() regulator: wm831x-dcdc: Use platform_register/unregister_drivers() regulator: lp8788-ldo: Use platform_register/unregister_drivers() regulator: core: Fix nested locking of supplies ...

Merge tag 'bcm2835-drivers-next-2015-12-28' of http://github.com/anholt/linux into next/drivers

2015-12-31T16:11:29Z

Pull "BCM2835 drivers changes for 4.5" from Eric Anholt: This pull request includes the bcm2835 changes for 4.5 targeting the arm-soc next/drivers branch. * tag 'bcm2835-drivers-next-2015-12-28' of http://github.com/anholt/linux: ARM: bcm2835: add rpi power domain driver dt-bindings: add rpi power domain driver bindings ARM: bcm2835: Define two new packets from the latest firmware.

Merge tag 'v4.4-next-dts' of https://github.com/mbgg/linux-mediatek into next/dt

2015-12-22T21:00:45Z

Add regulators to the scpsys binding. Move the include of the reset contoller to include/dt-bindings/reset. Add basic support for mt2701 SoC and evaluation board. * tag 'v4.4-next-dts' of https://github.com/mbgg/linux-mediatek: dt-bindings: soc: Add supplies for Mediatek SCPSYS unit ARM: mediatek: DT: Move reset controller constants into common location ARM: dts: mediatek: add MT2701 basic support Document: DT: Add bindings for mediatek MT2701 SoC Platform Signed-off-by: Olof Johansson

Merge tag 'qcom-dt-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

2015-12-22T20:17:48Z

Qualcomm ARM Based Device Tree Updates for v4.5 * Add support for Sony Xperia Z * Updates for Sony Honami board * Updates for APQ8064 generic platform * Updates for MSM8974 generic platform * Add fixed rate oscillators for MSM8960 and APQ8064 * Add documentation for SMSM and SMP2P * Fixup PMIC compat strings * Add support for SMEM, RPM/SMD on APQ8084 * Fixup compat on IFC5640 * tag 'qcom-dt-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (24 commits) arm: dts: Add support for PMA8084 on APQ8084 arm: dts: Add RPM/SMD support on APQ8084 arm: dts: Add APQ8084 SMEM nodes ARM: dts: qcom: apq8064-ifc6410 Use hardware flow control for GSBI6 arm: dts: qcom: apq8064: Add fixed rate on-board oscillators ARM: dts: qcom: msm8974: Add i2c8 node ARM: dts: qcom: msm8974: Disable wled and move it to honami arm: dts: qcom: Add generic PMIC gpio/MPP compat strings arm: dts: qcom: Add aliases for PMICs arm: dts: qcom: Update ifc6540 compat for qcom boot format arm: dts: qcom: Add board clocks ARM: dts: qcom: apq8064: Introduce Sony Xperia Z dts ARM: dts: qcom: apq8064: Introduce gsbi5 and gsbi5 serial node ARM: dts: qcom: apq8064: Declare all pm8921 regulators ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes dt-binding: soc: qcom: Introduce qcom, smp2p binding documentation dt-binding: soc: qcom: Add Qualcomm SMSM device tree documentation devicetree: Add hardware rng entry to qcom-apq8064.dtsi ARM: dts: qcom: msm8974-honami: Specify charging parameters ARM: dts: qcom: msm8974-honami: Add uSD slot nodes ... Signed-off-by: Olof Johansson

dt-bindings: add rpi power domain driver bindings

2015-12-22T04:00:40Z

This patch adds devicetree tree bindings for the Raspberry Pi power domain driver. Signed-off-by: Alexander Aring Signed-off-by: Eric Anholt Acked-by: Rob Herring Reviewed-by: Ulf Hansson Reviewed-by: Kevin Hilman

soc: qcom: documentation: Update SMD/RPM Docs

2015-12-16T12:29:54Z

This patch moves the qcom,smd-rpm.txt to the correct location and splits out the smd and rpm documentation. In addition, a smd-rpm-regulator document is added. Signed-off-by: Andy Gross Acked-by: Bjorn Andersson Signed-off-by: Mark Brown

dt-bindings: Consolidate SRAM bindings from all vendors

2015-12-09T21:29:37Z

SRAM bindings for various SoCs, using the mmio-sram genalloc API, are spread over different places - per SoC vendor. Since all of these are quite similar (they depend on mmio-sram) move them to a common place. Suggested-by: Rob Herring Signed-off-by: Krzysztof Kozlowski Cc: Heiko Stuebner Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: Kukjin Kim Acked-by: Maxime Ripard Acked-by: Heiko Stuebner Signed-off-by: Rob Herring

dt-bindings: soc: Add supplies for Mediatek SCPSYS unit

2015-12-09T11:24:56Z

The power domains in the SCPSYS unit are supplied by regulators. Add the properties for them to the binding document. Signed-off-by: Sascha Hauer Cc: devicetree@vger.kernel.org Acked-by: Rob Herring Signed-off-by: Matthias Brugger