kernel.git/Documentation/devicetree/bindings/serial, branch linux-6.4.y

dt-bindings: sc16is7xx: Add property to change GPIO function

2023-09-06T20:25:32Z

commit 4cf478dc5d707e56aefa258c049872eff054a353 upstream. Some variants in this series of UART controllers have GPIO pins that are shared between GPIO and modem control lines. The pin mux mode (GPIO or modem control lines) can be set for each ports (channels) supported by the variant. This adds a property to the device tree to set the GPIO pin mux to modem control lines on selected ports if needed. Cc: stable@vger.kernel.org # 6.1.x Signed-off-by: Hugo Villeneuve Acked-by: Conor Dooley Reviewed-by: Lech Perczak Acked-by: Rob Herring Link: https://lore.kernel.org/r/20230807214556.540627-4-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman

dt-bindings: serial: 8250_omap: add rs485-rts-active-high

2023-06-01T18:04:00Z

Add rs485-rts-active-high property, this was removed by mistake. In general we just use rs485-rts-active-low property, however the OMAP UART for legacy reason uses the -high one. Fixes: 767d3467eb60 ("dt-bindings: serial: 8250_omap: drop rs485 properties") Closes: https://lore.kernel.org/all/ZGefR4mTHHo1iQ7H@francesco-nb.int.toradex.com/ Signed-off-by: Francesco Dolcini Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20230531111038.6302-1-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman

Merge 6.3-rc6 into tty-next

2023-04-10T06:51:09Z

We need the tty/serial fixes in here for testing. Signed-off-by: Greg Kroah-Hartman

dt-bindings: serial: fsl-lpuart: add optional power-domains property

2023-04-05T17:31:02Z

Add optional power-domains property for i.MX8 usage. Signed-off-by: Peng Fan Acked-by: Rob Herring Link: https://lore.kernel.org/r/20230328054355.1973397-1-peng.fan@oss.nxp.com Signed-off-by: Greg Kroah-Hartman

dt-bindings: serial: snps-dw-apb-uart: Switch dma-names order

2023-03-29T09:06:44Z

Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties") documented dma-names property to handle Allwinner D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the reverse of what a different board expects: rk3326-odroid-go2.dtb: serial@ff030000: dma-names:0: 'rx' was expected A quick and incomplete check shows the inconsistency is present in many other DTS files: $ git grep -A10 snps,dw-apb-uart | grep dma-names | sort -u arch/arm64/boot/dts/rockchip/px30.dtsi- dma-names = "tx", "rx"; arch/arm64/boot/dts/rockchip/rk3328.dtsi- dma-names = "tx", "rx"; arch/arm64/boot/dts/rockchip/rk3588s.dtsi- dma-names = "tx", "rx"; arch/arm/boot/dts/rk3066a.dtsi- dma-names = "tx", "rx"; arch/arm/boot/dts/rk3128.dtsi- dma-names = "tx", "rx"; arch/arm/boot/dts/rk3288.dtsi- dma-names = "tx", "rx"; arch/arm/boot/dts/rv1126.dtsi- dma-names = "tx", "rx"; arch/arm/boot/dts/socfpga.dtsi- dma-names = "tx", "rx"; arch/arm/boot/dts/sun6i-a31.dtsi- dma-names = "rx", "tx"; arch/arm/boot/dts/sun8i-a23-a33.dtsi- dma-names = "rx", "tx"; arch/arm/boot/dts/sun8i-v3s.dtsi- dma-names = "rx", "tx"; arch/arm/boot/dts/sunxi-h3-h5.dtsi- dma-names = "rx", "tx"; arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi- dma-names = "rx", "tx"; The initial proposed solution was to allow a flexible dma-names order in the binding, due to potential ABI breakage concerns after fixing the DTS files. But luckily the Allwinner boards are not really affected, since all of them are using a shared DMA channel for rx and tx: $ git grep -A10 snps,dw-apb-uart | grep 'sun.*dmas' | sort -u arch/arm/boot/dts/sun6i-a31.dtsi- dmas = <&dma 10>, <&dma 10>; arch/arm/boot/dts/sun6i-a31.dtsi- dmas = <&dma 22>, <&dma 22>; arch/arm/boot/dts/sun6i-a31.dtsi- dmas = <&dma 6>, <&dma 6>; arch/arm/boot/dts/sun6i-a31.dtsi- dmas = <&dma 7>, <&dma 7>; arch/arm/boot/dts/sun6i-a31.dtsi- dmas = <&dma 8>, <&dma 8>; arch/arm/boot/dts/sun6i-a31.dtsi- dmas = <&dma 9>, <&dma 9>; arch/arm/boot/dts/sun8i-a23-a33.dtsi- dmas = <&dma 10>, <&dma 10>; arch/arm/boot/dts/sun8i-a23-a33.dtsi- dmas = <&dma 6>, <&dma 6>; arch/arm/boot/dts/sun8i-a23-a33.dtsi- dmas = <&dma 7>, <&dma 7>; arch/arm/boot/dts/sun8i-a23-a33.dtsi- dmas = <&dma 8>, <&dma 8>; arch/arm/boot/dts/sun8i-a23-a33.dtsi- dmas = <&dma 9>, <&dma 9>; arch/arm/boot/dts/sun8i-v3s.dtsi- dmas = <&dma 6>, <&dma 6>; arch/arm/boot/dts/sun8i-v3s.dtsi- dmas = <&dma 7>, <&dma 7>; arch/arm/boot/dts/sun8i-v3s.dtsi- dmas = <&dma 8>, <&dma 8>; arch/arm/boot/dts/sunxi-h3-h5.dtsi- dmas = <&dma 6>, <&dma 6>; arch/arm/boot/dts/sunxi-h3-h5.dtsi- dmas = <&dma 7>, <&dma 7>; arch/arm/boot/dts/sunxi-h3-h5.dtsi- dmas = <&dma 8>, <&dma 8>; arch/arm/boot/dts/sunxi-h3-h5.dtsi- dmas = <&dma 9>, <&dma 9>; arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi- dmas = <&dma 14>, <&dma 14>; arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi- dmas = <&dma 15>, <&dma 15>; arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi- dmas = <&dma 16>, <&dma 16>; arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi- dmas = <&dma 17>, <&dma 17>; arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi- dmas = <&dma 18>, <&dma 18>; arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi- dmas = <&dma 19>, <&dma 19>; Switch dma-names order to tx->rx as the first step in fixing the inconsistency. The remaining DTS fixes will be handled by separate patches. Signed-off-by: Cristian Ciocaltea Reviewed-by: Conor Dooley Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20230321215624.78383-2-cristian.ciocaltea@collabora.com Signed-off-by: Greg Kroah-Hartman

dt-bindings: serial: renesas,scif: Fix 4th IRQ for 4-IRQ SCIFs

2023-03-29T08:58:44Z

The fourth interrupt on SCIF variants with four interrupts (RZ/A1) is the Break interrupt, not the Transmit End interrupt (like on SCI(g)). Update the description and interrupt name to fix this. Fixes: 384d00fae8e51f8f ("dt-bindings: serial: sh-sci: Convert to json-schema") Cc: stable Signed-off-by: Geert Uytterhoeven Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/719d1582e0ebbe3d674e3a48fc26295e1475a4c3.1679046394.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman

dt-bindings: serial: snps-dw-apb-uart: correct number of DMAs

2023-03-29T08:54:05Z

The "minItems" alone does not impose any upper limit of DMAs, so switch it to "maxItems" which also implies same value for minItems. Fixes: 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Conor Dooley Acked-by: Rob Herring Link: https://lore.kernel.org/r/20230317155712.99654-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman

dt-bindings: serial: Drop unneeded quotes

2023-03-29T08:41:05Z

Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20230327170137.4104272-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman

dt-bindings: serial: amlogic,meson-uart: Add compatible string for G12A

2023-03-09T16:21:02Z

Amlogic G12A SoCs gained a new "divide XTAL by 2" bit. Everything else (we know about) is identical to the UART IP on GX (GXBB/GXL/GXM) SoCs. Add a new compatible string for this SoC so this new bit can be managed accordingly while keeping "amlogic,meson-gx-uart" as fallback compatible string. Signed-off-by: Martin Blumenstingl Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20230307222651.2106615-2-martin.blumenstingl@googlemail.com Signed-off-by: Greg Kroah-Hartman

dt-bindings: serial: mediatek,uart: add MT8365

2023-03-09T16:20:15Z

Add binding description for mediatek,mt8365-uart Signed-off-by: Bernhard Rosenkränzer Acked-by: Krzysztof Kozlowski Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20230309143459.401783-3-bero@baylibre.com Signed-off-by: Greg Kroah-Hartman