kernel.git/Documentation/devicetree/bindings/regulator, branch linux-6.10.y

Merge tag 'devicetree-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2024-05-18T00:27:49Z

Pull devicetree updates from Rob Herring: "DT Bindings: - Convert samsung,exynos5-dp, atmel,lcdc, aspeed,ast2400-wdt bindings to schemas - Add bindings for Allwinner H616 NMI controller, Renesas r8a779g0 irqc, Renesas R-Car V4M TMU and CMT timers, Freescale S32G3 linflexuart, and Mediatek MT7988 XHCI - Add 'reg' constraints on DSI and SPI display panels - More dropping of unnecessary quotes in schemas - Use full paths rather than relative paths in schema $refs - Drop redundant storing of phandle for reserved memory DT Core: - Use scope based cleanups for kfree() and of_node_put() - Track interrupt-map and power-supplies for fw_devlink - Add buffer overflow check in of_modalias() - Add and use __of_prop_free() helper for freeing struct property" * tag 'devicetree-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits) of: property: Add fw_devlink support for interrupt-map property dt-bindings: display: panel: constrain 'reg' in DSI panels dt-bindings: display: panel: constrain 'reg' in SPI panels dt-bindings: display: samsung,ams495qa01: add missing SPI properties ref dt-bindings: Use full path to other schemas dt-bindings: PCI: qcom,pcie-sm8350: Drop redundant 'oneOf' sub-schema of: module: add buffer overflow check in of_modalias() dt-bindings: PCI: microchip: increase number of items in ranges property dt-bindings: Drop unnecessary quotes on keys dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop unnecessary quotes of: property: Use scope based cleanup on port_node of: reserved_mem: Remove the use of phandle from the reserved_mem APIs of: property: fw_devlink: Add support for "power-supplies" binding dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema dt-bindings: irq: sun7i-nmi: Add binding for the H616 NMI controller dt-bindings: interrupt-controller: renesas,irqc: Add r8a779g0 support dt-bindings: timer: renesas,tmu: Add R-Car V4M support dt-bindings: timer: renesas,cmt: Add R-Car V4M support of: Use scope based of_node_put() cleanups of: Use scope based kfree() cleanups ...

Merge tag 'regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

2024-05-14T21:36:09Z

Pull regulator updates from Mark Brown: "There's one API update here, a new API factoring out a common pattern for reference voltage supplies. These are supplies used as a reference by analogue circuits where the consumer requests and enables the supply, reads the voltage to calibrate the user and then never touches it again. This is factored out into a single operation which just returns the voltage and uses devm_ to manage the request and enable portion. Otherwise this has been a very quiet release, we've got some new device support, some small fixes, housekeeping and cleanup work but nothing substantial. There's also some non-regulator changes in here, a number of users for the new reference voltage API were merged along with it and some MFD changes were pulled in as dependencies for new driver work. Highlights: - Add a new API for single operation handling of reference voltages - Support for Allwinner AXP717 and D1, and NXP PCA9561A" * tag 'regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (33 commits) regulator: sun20i: Add Allwinner D1 LDOs driver regulator: dt-bindings: Add Allwinner D1 system LDOs regulator: Mention regulator id in error message about dummy supplies staging: iio: impedance-analyzer: ad5933: Use devm_regulator_get_enable_read_voltage() iio: frequency: admv1013: Use devm_regulator_get_enable_read_voltage() iio: addac: ad74115: Use devm_regulator_get_enable_read_voltage() hwmon: (adc128d818) simplify final return in probe regulator: devres: fix devm_regulator_get_enable_read_voltage() return hwmon: (da9052) Use devm_regulator_get_enable_read_voltage() hwmon: (adc128d818) Use devm_regulator_get_enable_read_voltage() regulator: devres: add API for reference voltage supplies regulator: rtq2208: Fix LDO discharge register and add vsel setting regulator: dt-bindings: fixed-regulator: Add a preferred node name regulator: axp20x: add support for the AXP717 mfd: axp20x: Add support for AXP717 PMIC dt-bindings: mfd: x-powers,axp152: Document AXP717 regulator: axp20x: fix typo-ed identifier dt-bindings: regulator: qcom,usb-vbus-regulator: Add PM7250B compatible regulator: pca9450: add pca9451a support regulator: dt-bindings: pca9450: add pca9451a support ...

regulator: dt-bindings: Add Allwinner D1 system LDOs

2024-05-09T15:44:00Z

The Allwinner D1 SoC contains two pairs of in-package LDOs. The pair of "system" LDOs is for general purpose use. LDOA generally powers the board's 1.8 V rail. LDOB powers the in-package DRAM, where applicable. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Samuel Holland Signed-off-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20240509153107.438220-2-wens@kernel.org Signed-off-by: Mark Brown

dt-bindings: Drop unnecessary quotes on keys

2024-05-03T12:50:05Z

The yamllint quoted-strings check wasn't checking keys for quotes, but support for checking keys was added in 1.34 release. Fix all the errors found when enabling the check. Clean-up the xilinx-versal-cpm formatting while we're here. Acked-by: Mark Brown Reviewed-by: Krzysztof Kozlowski Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20240426202239.2837516-1-robh@kernel.org Signed-off-by: Rob Herring (Arm)

regulator: dt-bindings: fixed-regulator: Add a preferred node name

2024-04-29T15:10:13Z

Define "regulator-[0-9]v[0-9]" as the preferred node name for fixed regulators. Other suffixes with names are also accepted. Combined, these make up about half of the existing names in use. For now this only serves as documentation as the schema still allows anything to avoid lots of additional warnings for something low priority to fix. Once a "no deprecated" mode is added to the tools, warnings can be enabled selectively. Signed-off-by: Rob Herring (Arm) Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240426215147.3138211-1-robh@kernel.org Signed-off-by: Mark Brown

dt-bindings: treewide: add access-controllers description

2024-04-05T12:39:10Z

access-controllers is an optional property that allows a peripheral to refer to one or more domain access controller(s). Description of this property is added to all peripheral binding files of the peripheral under the STM32 firewall controller. It allows an accurate representation of the hardware, where various peripherals are connected to a firewall bus. The firewall can then check the peripheral accesses before allowing its device to probe. Signed-off-by: Gatien Chevallier Reviewed-by: Rob Herring Signed-off-by: Alexandre Torgue

add pmic pca9451a support

2024-03-25T14:48:19Z

Merge series from Joy Zou : The patchset supports pmic pca9451a. For the details, please check the patch commit log. --- Changes in v5: - adjust gpio@22 to the front of pmic@25. Changes in v4: - modify the comment for uSDHC but not i2c. Changes in v3: - modify the dts voltags constraints. - remove unnecessary changes in driver code. - modify commit message. - add tag for dt-bindings. Changes in v2: - drop old part support. Joy Zou (3): regulator: dt-bindings: pca9450: add pca9451a support regulator: pca9450: add pca9451a support arm64: dts: imx93-11x11-evk: add pca9451a support .../regulator/nxp,pca9450-regulator.yaml | 1 + .../boot/dts/freescale/imx93-11x11-evk.dts | 111 ++++++++++ drivers/regulator/pca9450-regulator.c | 194 +++++++++++++++++- include/linux/regulator/pca9450.h | 1 + 4 files changed, 305 insertions(+), 2 deletions(-) -- 2.37.1

dt-bindings: regulator: qcom,usb-vbus-regulator: Add PM7250B compatible

2024-03-25T00:48:40Z

The VBUS register block on the PM6150 PMIC shares the design with the PM8150B one. Define corresponding compatible string, having the qcom,pm8150b-vbus-reg as a fallback. Signed-off-by: Luca Weiss Reviewed-by: Bryan O'Donoghue Link: https://msgid.link/r/20240322-fp4-tcpm-v1-1-c5644099d57b@fairphone.com Signed-off-by: Mark Brown

regulator: dt-bindings: pca9450: add pca9451a support

2024-03-25T00:48:34Z

Update pca9450 bindings. Signed-off-by: Joy Zou Acked-by: Krzysztof Kozlowski Link: https://msgid.link/r/20240318095633.4079027-2-joy.zou@nxp.com Signed-off-by: Mark Brown

Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2024-03-21T19:35:20Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots of tiny changes and forward progress to support new hardware and better support for existing devices. Included in here are: - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more people start to use the hardware - default USB authentication mode Kconfig and documentation update to make it more obvious what is going on - USB typec updates and enhancements - usual dwc3 driver updates - usual xhci driver updates - function USB (i.e. gadget) driver updates and additions - new device ids for lots of drivers - loads of other small updates, full details in the shortlog All of these, including a "last minute regression fix" have been in linux-next with no reported issues" * tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits) usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic phy: tegra: xusb: Add API to retrieve the port number of phy USB: gadget: pxa27x_udc: Remove unused of_gpio.h usb: gadget/snps_udc_plat: Remove unused of_gpio.h usb: ohci-pxa27x: Remove unused of_gpio.h usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined usb: Clarify expected behavior of dev_bin_attrs_are_visible() xhci: Allow RPM on the USB controller (1022:43f7) by default usb: isp1760: remove SLAB_MEM_SPREAD flag usage usb: misc: onboard_hub: use pointer consistently in the probe function usb: gadget: fsl: Increase size of name buffer for endpoints usb: gadget: fsl: Add of device table to enable module autoloading usb: typec: tcpm: add support to set tcpc connector orientatition usb: typec: tcpci: add generic tcpci fallback compatible dt-bindings: usb: typec-tcpci: add tcpci fallback binding usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg} usb: core: Set connect_type of ports based on DT node dt-bindings: usb: Add downstream facing ports to realtek binding ...