kernel.git/Documentation/devicetree/bindings/regulator, branch linux-4.18.y

dt-bindings: Fix unbalanced quotation marks

2018-06-26T20:17:22Z

Multiple binding documents have various forms of unbalanced quotation marks. Fix them. Signed-off-by: Jonathan Neuschäfer Acked-by: Krzysztof Kozlowski Acked-by: Jon Hunter Acked-by: Srinivas Kandagatla Acked-by: Dmitry Torokhov Acked-by: Florian Fainelli Signed-off-by: Rob Herring

regulator: bd71837: Devicetree bindings for BD71837 regulators

2018-05-30T10:31:17Z

Document devicetree bindings for ROHM BD71837 PMIC regulators. Signed-off-by: Matti Vaittinen Signed-off-by: Mark Brown

dt-bindings: qcom_spmi: Document SAW support

2018-05-24T19:23:48Z

Document the DT bindings for the SAW regulators. The saw-leader is the only property that is configurable in DT. The saw-slave property allows ganging (grouping) of several regulators so that their outputs can be combined. Signed-off-by: Ilia Lin Reviewed-by: Rob Herring Signed-off-by: Mark Brown

regulator: bindings: Add properties for coupled regulators

2018-05-17T07:05:04Z

Some regulators require keeping their voltage spread below defined max_spread. Add properties to provide information on regulators' coupling. Signed-off-by: Maciej Purski Reviewed-by: Rob Herring Signed-off-by: Mark Brown

regulator: of: add property for allowed modes specification

2018-05-17T05:11:18Z

Add a common device tree property for regulator nodes to support the specification of allowed operating modes. Signed-off-by: David Collins Signed-off-by: Mark Brown

regulator: add binding for the SY8106A voltage regulator

2018-05-09T09:25:06Z

SY8106A is an I2C-controlled adjustable voltage regulator made by Silergy Corp. Add its device tree binding. Signed-off-by: Ondrej Jirman [Icenowy: Change commit message and slight fixes] Signed-off-by: Icenowy Zheng Reviewed-by: Chen-Yu Tsai Acked-by: Rob Herring Signed-off-by: Mark Brown

regulator: pfuze100: Make the node name generic

2018-05-05T01:35:00Z

According to Devicetree Specification v0.2 document: "The name of a node should be somewhat generic, reflecting the function of the device and not its precise programming model." Do as suggested in the binding example. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown

Merge remote-tracking branches 'regulator/topic/88pg86x', 'regulator/topic/dt', 'regulator/topic/formatting' and 'regulator/topic/gpio' into regulator-next

2018-03-28T02:33:53Z

regulator: qcom: smd: Add pm8998 and pmi8998 regulators

2018-03-28T02:10:22Z

Add the pm8998 and pmi8998 regulators as used in the MSM8998 platform. Signed-off-by: Bjorn Andersson Signed-off-by: Mark Brown

regulator: 88pg86x: add DT bindings document

2018-03-09T13:01:16Z

The only device-specific node names are "buck1" and "buck2" for the two regulators present on the device. Sleep mode GPIO and per-regulator GPIO enable pins are not exposed (the driver does not support them either). Signed-off-by: Alexander Monakov Signed-off-by: Mark Brown