kernel.git/Documentation/devicetree/bindings/regulator, branch linux-3.19.y

Merge remote-tracking branches 'regulator/topic/sky81452' and 'regulator/topic/stub' into regulator-next

2014-12-05T11:14:43Z

Merge remote-tracking branches 'regulator/topic/max77686', 'regulator/topic/max77693', 'regulator/topic/max77802', 'regulator/topic/power-off' and 'regulator/topic/rk808' into regulator-next

2014-12-05T11:14:37Z

Merge branch 'topic/suspend' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-sky81452

2014-12-05T11:06:18Z

Conflicts: drivers/regulator/sky81452-regulator.c

regulator: sky81452: Modify Device Tree structure

2014-12-02T12:23:07Z

Signed-off-by: Gyungoh Yoo Signed-off-by: Mark Brown

of: Rename "poweroff-source" property to "system-power-controller"

2014-12-01T19:33:44Z

It reverts commit a4b4e0461ec5 ("of: Add standard property for poweroff capability"). As discussed on the mailing list, it makes more sense to rename back to the old established property name, without the vendor prefix. Problem being that the word "source" usually tends to be used for inputs and that is out of control of the OS. The poweroff capability is an output which simply turns the system-power off. Also, this property might be used by drivers which power-off the system and power back on subsequent RTC alarms. This seems to suggest to remove "poweroff" from the property name and to choose "system-power-controller" as the more generic name. This patchs adds the required renaming changes and defines an helper function which checks if this property is set. Signed-off-by: Romain Perier Acked-by: Grant Likely Acked-by: Johan Hovold Signed-off-by: Mark Brown

regulator: max77802: Document binding for regulator operating modes

2014-11-26T19:42:47Z

Some regulators from the max77802 PMIC support to be configured in one of two operating mode: Output ON (normal) and Output On Low Power Mode. Not all regulators support these two modes and for some of them, the mode can be changed while the system is running in normal operation while others only support their mode to be changed on system suspend. Extend the max77802 PMIC binding by documenting the possible operating modes values so the regulators modes can be configured correctly. Signed-off-by: Javier Martinez Canillas Signed-off-by: Mark Brown

regulator: Document binding for initial and suspend modes

2014-11-26T18:58:14Z

Some regulators can run on different operating modes (opmodes). This allows systems to choose the most efficient opmode for each regulator. This patch builds on top of (291d761 regulator: Document binding for regulator suspend state for PM state) adding a regulator-initial-mode DT property to configure at startup the operating mode for regulators that support changing its mode during normal operation and a property regulator-mode to be used in the regulator-state-[mem/disk] nodes for regulators that supports changing its operating mode when the system enters in a suspend state. The set of possible modes that a regulator can operate depends on the hardware capabilities so a list of generic operating modes can't be provided. Instead, each hardware binding should define the list of valid operating modes for the regulators found on that device. Signed-off-by: Javier Martinez Canillas Signed-off-by: Mark Brown

regulator: Document binding for regulator suspend voltage

2014-11-03T12:27:04Z

This patch builds upon (291d761 regulator: Document binding for regulator suspend state for PM state) to allow setting the uV in addition to the state at suspend time. Signed-off-by: Doug Anderson Reviewed-by: Javier Martinez Canillas Reviewed-by: Chris Zhong Signed-off-by: Mark Brown

dt-bindings: Document the property poweroff-source for act8865 regulator

2014-10-22T15:59:53Z

Signed-off-by: Romain Perier Signed-off-by: Mark Brown

regulator: Document binding for regulator suspend state for PM state

2014-10-20T11:24:14Z

This patch add regulator suspend state to constraint in dt file. The regulation_ constraints structure already has regulator suspend state field as following. The regulator suspend state control the state of regulator according to PM (Power Management) state. - struct regulator_state state_disk - struct regulator_state state_mem Signed-off-by: Chanwoo Choi Acked-by: Kyungmin Park Signed-off-by: Mark Brown