Hosts the 0x221E linux distro kernel. https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-4.8.y 2016-08-06T04:01:33Z 2016-08-06T04:01:33Z Linus Torvalds 2016-08-06T04:01:33Z urn:sha1:a157b3aaa44829998d5a079174df989e5d8c20ff Pull pwm updates from Thierry Reding: "This set of changes improve some aspects of the atomic API as well as make use of this new API in the regulator framework to allow properly dealing with critical regulators controlled by a PWM. Aside from that there's a bunch of updates and cleanups for existing drivers, as well as the addition of new drivers for the Broadcom iProc, STMPE and ChromeOS EC controllers" * tag 'pwm/for-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits) regulator: pwm: Document pwm-dutycycle-unit and pwm-dutycycle-range regulator: pwm: Support extra continuous mode cases pwm: Add ChromeOS EC PWM driver dt-bindings: pwm: Add binding for ChromeOS EC PWM mfd: cros_ec: Add EC_PWM function definitions mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper pwm: atmel: Use of_device_get_match_data() pwm: atmel: Fix checkpatch warnings pwm: atmel: Fix disabling of PWM channels dt-bindings: pwm: Add R-Car H3 device tree bindings pwm: rcar: Use ARCH_RENESAS pwm: tegra: Add support for Tegra186 dt-bindings: pwm: tegra: Add compatible string for Tegra186 pwm: tegra: Avoid overflow when calculating duty cycle pwm: tegra: Allow 100 % duty cycle pwm: tegra: Add support for reset control pwm: tegra: Rename mmio_base to regs pwm: tegra: Remove useless padding pwm: tegra: Drop NUM_PWM macro pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value ... 2016-08-01T22:37:45Z Linus Torvalds 2016-08-01T22:37:45Z urn:sha1:043248cd4e9603e2e8858c4e20810d8e40be7d9d Pull ARM DT updates from Olof Johansson: "Device tree contents continue to be the largest branches we submit. This time around, some of the contents worth pointing out is: New SoC platforms: - Freescale i.MX 7Solo - Broadcom BCM23550 - Cirrus Logic EP7209 and EP7211 (clps711x platforms)_ - Hisilicon HI3519 - Renesas R8A7792 Some of the other delta that is sticking out, line-count wise: - Exynos moves of IP blocks under an SoC bus, which causes a large delta due to indentation changes - a new Tegra K1 board: Apalis - a bunch of small updates to many Allwinner platforms; new hardware support, some cleanup, etc" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (426 commits) ARM: dts: sun8i: Add dts file for inet86dz board ARM: dts: sun8i: Add dts file for Polaroid MID2407PXE03 tablet ARM: dts: sun8i: Use sun8i-reference-design-tablet for ga10h dts ARM: dts: sun8i: Use sun8i-reference-design-tablet for polaroid mid2809pxe04 ARM: dts: sun8i: reference-design-tablet: Add drivevbus-supply ARM: dts: Copy sun8i-q8-common.dtsi sun8i-reference-design-tablet.dtsi ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for utoo p66 dts ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for dit4350 dts ARM: dts: sun5i: reference-design-tablet: Remove mention of q8 ARM: dts: sun5i: reference-design-tablet: Set lradc vref to avcc ARM: dts: sun5i: Rename sun5i-q8-common.dtsi sun5i-reference-design-tablet.dtsi ARM: dts: sun5i: Move q8 display bits to sun5i-a13-q8-tablet.dts ARM: dts: sunxi: Rename sunxi-q8-common.dtsi sunxi-reference-design-tablet.dtsi ARM: dts: at91: Don't build unnecessary dtbs ARM: dts: at91: sama5d3x: separate motherboard gmac and emac definitions ARM: dts: at91: at91sam9g25ek: fix isi endpoint node ARM: dts: at91: move isi definition to at91sam9g25ek ARM: dts: at91: fix i2c-gpio node name ARM: dts: at91: vinco: fix regulator name ARM: dts: at91: ariag25 : fix onewire node ... 2016-07-25T08:39:36Z Brian Norris 2016-07-15T23:28:43Z urn:sha1:9e60f50b4a79ae2df791d89d08cf2b78ad7629bd The ChromeOS Embedded Controller can support controlling its attached PWMs via its host-command interface. The number of supported PWMs varies on a per-board basis, but we can autodetect this by checking the error codes, so we don't need an extra property for this. And because the EC only allows specifying the duty cycle and not the period, we don't specify the period via pwm-cells, and instead have only support for one cell -- to specify the index. Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> 2016-07-11T10:49:35Z Ulrich Hecht 2016-03-31T11:39:15Z urn:sha1:396d502c5167da69096c683c4566388ba42d2623 Add device tree bindings for the PWM controller found on R-Car H3 SoCs. The controller is compatible with the one found in earlier generations of R-Car SoCs. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> 2016-07-11T10:49:33Z Laxman Dewangan 2016-06-22T11:47:22Z urn:sha1:57dfd17edaf353d0880bea494be05e8cda82ebc0 Tegra186 has 8 different PWM controllers and each controller has only one output. Earlier SoC generations have 4 PWM outputs per controller. Add a device tree compatible string for Tegra186 to be able to differentiate between the two. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> 2016-07-11T10:49:28Z Linus Walleij 2016-04-05T21:22:29Z urn:sha1:27e8c8f3512371772b1fdd099466a8c198d05897 This adds fairly standard device tree bindings for the STMPE PWM found in STMPE24xx multi-purpose expanders. Cc: devicetree@vger.kernel.org Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> 2016-07-11T10:49:25Z Yendapally Reddy Dhananjaya Reddy 2016-07-05T06:00:24Z urn:sha1:f734f6ddbc12364021603d4bc8ba031b782508a5 Add a device tree binding for Broadcom iProc PWM controller. Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> 2016-07-08T15:53:36Z Cooper Jr., Franklin 2016-03-18T01:15:23Z urn:sha1:e1aaf89a5415ab6514cb6798148c7fe04c0ee138 Now that the node name has been changed from ehrpwm to pwm the document should show this proper usage. Also change the unit address in the example from 0 to the proper physical address value that should be used. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> 2016-07-07T12:32:08Z Arnd Bergmann 2016-07-07T12:32:08Z urn:sha1:82be1178ee839ac93f8bb90550892c478d53e6e5 Merge "omap ir-rx51 driver fixes for multiarch for v4.8 merge window" from Tony Lindgren: Fix a long time regression for ir-rx51 driver for n900 device tree booting. This driver has been unusable with multiarch because of the hardware timer access. With the recent PWM changes, we can finally fix the driver for multiarch and device tree support. And naturally there is no rush for these for the -rc cycle, these can wait for the merge window. The PWM changes have been acked by Thierry. For the media changes I did not get an ack from Mauro but he was Cc'd in the discussion and these changes do not conflict with other media changes. After this series we can drop the remaining omap3 legacy booting board files finally. * tag 'omap-for-v4.8/ir-rx51-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ir-rx51: use hrtimer instead of dmtimer ir-rx51: add DT support to driver ir-rx51: use PWM framework instead of OMAP dmtimer pwm: omap-dmtimer: Allow for setting dmtimer clock source ir-rx51: Fix build after multiarch changes broke it 2016-07-06T15:38:17Z Alexander Shiyan 2016-06-04T07:09:58Z urn:sha1:ba60ae1dc091b86d4bc74d23c85fc091a632fba7 This patch changes the compatibility string to match with the smallest supported chip (EP7209). Since the DT-support for this CPU is not yet announced, this change is safe. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>