kernel.git/Documentation/devicetree/bindings/power, branch linux-6.10.y

dt-bindings: power: supply: max8903: specify flt-gpios as input

2024-04-30T14:43:09Z

The FLT pin was incorrected documented as an output. The MAX8903 uses it to signal to the processor that a charging fault has occurred. Signed-off-by: Herman van Hazendonk Link: https://lore.kernel.org/r/20240415151645.1986014-1-github.com@herrie.org Signed-off-by: Sebastian Reichel

Merge tag 'input-for-v6.9-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2024-03-17T18:50:54Z

Pull input updates from Dmitry Torokhov: - a new driver for Goodix Berlin I2C and SPI touch controllers - support for IQS7222D v1.1 and v1.2 in iqs7222 driver - support for IST3032C and IST3038B parts in Imagis touchscreen driver - support for touch keys for Imagis touchscreen controllers - support for Snakebyte GAMEPADs in xpad driver - various cleanups and conversions to yaml for device tree bindings - assorted fixes and cleanups - old Synaptics navpoint driver has been removed since the only board that used it (HP iPAQ hx4700) was removed a while ago. * tag 'input-for-v6.9-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (37 commits) Input: xpad - add support for Snakebyte GAMEPADs dt-bindings: input: samsung,s3c6410-keypad: convert to DT Schema Input: imagis - add touch key support dt-bindings: input: imagis: Document touch keys Input: imagis - use FIELD_GET where applicable Input: make input_class constant dt-bindings: input: atmel,captouch: convert bindings to YAML Input: iqs7222 - add support for IQS7222D v1.1 and v1.2 dt-bindings: input: allwinner,sun4i-a10-lrad: drop redundant type from label Input: serio - make serio_bus const Input: synaptics-rmi4 - make rmi_bus_type const Input: xilinx_ps2 - fix kernel-doc for xps2_of_probe function input/touchscreen: imagis: add support for IST3032C dt-bindings: input/touchscreen: imagis: add compatible for IST3032C input/touchscreen: imagis: Add support for Imagis IST3038B dt-bindings: input/touchscreen: Add compatible for IST3038B input/touchscreen: imagis: Correct the maximum touch area value Input: leds - change config symbol dependency for audio mute trigger Input: ti_am335x_tsc - remove redundant assignment to variable config Input: xpad - sort xpad_device by vendor and product ID ...

dt-bindings: input: samsung,s3c6410-keypad: convert to DT Schema

2024-03-15T18:53:55Z

Convert Samsung SoC Keypad bindings to DT schema with changes: 1. Rename "linux,keypad-no-autorepeat" property to "linux,input-no-autorepeat", because the latter was implemented in the Linux driver. 2. Add clocks and clock-names, already used by DTS and the Linux driver. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20240312183001.714626-1-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Torokhov

dt-bindings: power: rpmpd: Add MSM8974 power domains

2024-02-13T12:16:49Z

Add the compatibles and indexes for the rpmpd in MSM8974, both with the standard PM8841+PM8941 PMICs but also devices found with PMA8084. Signed-off-by: Luca Weiss Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240210-msm8974-rpmpd-v2-1-595e2ff80ea1@z3ntu.xyz Signed-off-by: Ulf Hansson

dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support

2024-01-30T12:53:14Z

Document support for the System Controller (SYSC) in the R-Car V4M (R8A779H0) SoC. Signed-off-by: Duy Nguyen Signed-off-by: Geert Uytterhoeven Acked-by: Conor Dooley Reviewed-by: Niklas Söderlund Reviewed-by: Wolfram Sang Link: https://lore.kernel.org/r/6315cbd0b6e9b92a7914d98f397a2c663ad521c6.1706194617.git.geert+renesas@glider.be Signed-off-by: Ulf Hansson

Merge tag 'for-v6.8-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2024-01-19T19:34:19Z

Pull power supply and reset updates from Sebastian Reichel: "New features: - bq24190: Add support for BQ24296 charger Cleanups: - all reset drivers: Stop using module_platform_driver_probe() - gpio-restart: use devm_register_sys_off_handler - pwr-mlxbf: support graceful reboot - cw2015: correct time_to_empty units - qcom-battmgr: Fix driver initialization sequence - bq27xxx: Start/Stop delayed work in suspend/resume - minor cleanups and fixes" * tag 'for-v6.8-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (33 commits) power: supply: bq24190_charger: Fix "initializer element is not constant" error power: supply: bq24190_charger: Add support for BQ24296 dt-bindings: power: supply: bq24190: Add BQ24296 compatible dt-bindings: power: reset: xilinx: Rename node names in examples power: supply: qcom_battmgr: Register the power supplies after PDR is up dt-bindings: power: reset: qcom-pon: fix inconsistent example power: supply: Fix null pointer dereference in smb2_probe power: reset: at91: Drop '__init' from at91_wakeup_status() power: supply: Use multiple MODULE_AUTHOR statements power: supply: Fix indentation and some other warnings power: reset: gpio-restart: Use devm_register_sys_off_handler() power: supply: bq256xx: fix some problem in bq256xx_hw_init power: supply: cw2015: correct time_to_empty units in sysfs power: reset: at91-sama5d2_shdwc: Convert to platform remove callback returning void power: reset: at91-reset: Convert to platform remove callback returning void power: reset: tps65086-restart: Convert to platform remove callback returning void power: reset: syscon-poweroff: Convert to platform remove callback returning void power: reset: rmobile-reset: Convert to platform remove callback returning void power: reset: restart-poweroff: Convert to platform remove callback returning void power: reset: regulator-poweroff: Convert to platform remove callback returning void ...

Merge tag 'devicetree-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2024-01-12T23:05:30Z

Pull devicetree updates from Rob Herring: - Convert FPGA bridge, all TPMs (finally), and Rockchip HDMI bindings to schemas - Improvements in Samsung GPU schemas - A few more cases of dropping unneeded quotes in schemas - Merge QCom idle-states txt binding into common idle-states schema - Add X1E80100, SM8650, SM8650, and SDX75 SoCs to QCom Power Domain Controller - Add NXP i.mx8dl to SCU PD - Add synaptics r63353 panel controller - Clarify the wording around the use of 'wakeup-source' property - Add a DTS coding style doc - Add smi vendor prefix - Fix DT_SCHEMA_FILES incorrect matching of paths outside the kernel tree - Disable sysfb (e.g. EFI FB) when simple-framebuffer node is present - Fix double free in of_parse_phandle_with_args_map() - A couple of kerneldoc fixes * tag 'devicetree-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (37 commits) of: unittest: Fix of_count_phandle_with_args() expected value message dt-bindings: fpga: altera: Convert bridge bindings to yaml dt-bindings: fpga: Convert bridge binding to yaml dt-bindings: vendor-prefixes: Add smi dt-bindings: power: Clarify wording for wakeup-source property of: Fix double free in of_parse_phandle_with_args_map dt-bindings: ignore paths outside kernel for DT_SCHEMA_FILES drivers: of: Fixed kernel doc warning dt-bindings: tpm: Document Microsoft fTPM bindings dt-bindings: tpm: Convert IBM vTPM bindings to DT schema dt-bindings: tpm: Convert Google Cr50 bindings to DT schema dt-bindings: tpm: Consolidate TCG TIS bindings dt-bindings: display: rockchip,inno-hdmi: Document RK3128 compatible dt-bindings: arm: Add remote etm dt-binding dt-bindings: mmc: sdhci-pxa: Fix 'regs' typo media: dt-bindings: samsung,s5p-mfc: Fix iommu properties schemas dt-bindings: display: panel: Add synaptics r63353 panel controller dt-bindings: arm: merge qcom,idle-state with idle-state dt-bindings: drm: rockchip: convert inno_hdmi-rockchip.txt to yaml dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries ...

dt-bindings: power: Clarify wording for wakeup-source property

2024-01-11T01:45:37Z

The wording in the current documentation is a little strong. The intention was not to fix any particular interrupt as wakeup capable but leave those details to the device. It wasn't intended to enforce any rules as what can be or can't be a wakeup interrupt. Soften the wording to not mandate that the 'wakeup-source' property be used, and clarify what it means when an interrupt is marked (or not marked) for wakeup. Link: https://lore.kernel.org/all/ZYAjxxHcCOgDVMTQ@bogus/ Link: https://lore.kernel.org/all/CAL_Jsq+MYwOG40X26cYmO9EkZ9xqWrXDi03MaRfxnV-+VGkXWQ@mail.gmail.com/ Signed-off-by: Mark Hasemeyer Link: https://lore.kernel.org/r/20240102140734.v4.4.I1016a45ac9e8daf8a9ebc9854ab90ec3542e7c30@changeid Signed-off-by: Rob Herring

dt-bindings: power: supply: bq24190: Add BQ24296 compatible

2023-12-24T23:58:14Z

The BQ24296 is most similar to the BQ24196, but the: 1. OTG config is split from CHG config (REG01) 2. ICHG (Fast Charge Current limit) range is smaller (<=3008mA) 3. NTC fault is simplified to 2 bits Signed-off-by: Hermes Zhang Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20231208034708.1248389-2-Hermes.Zhang@axis.com Signed-off-by: Sebastian Reichel

dt-bindings: power: reset: xilinx: Rename node names in examples

2023-12-24T23:10:56Z

Rename zynqmp-power node name to power-management which is more aligned with generic node name recommendation. Signed-off-by: Michal Simek Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/920c839ae2c9c5803c6c08b8705a0d8338bb94bc.1703161663.git.michal.simek@amd.com Signed-off-by: Sebastian Reichel