kernel.git/Documentation/devicetree/bindings/power, branch linux-5.8.y

dt-bindings: Remove more cases of 'allOf' containing a '$ref'

2020-06-11T19:50:43Z

Another round of 'allOf' removals that came in this cycle. json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works. This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax. Signed-off-by: Rob Herring

Merge tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2020-06-10T18:28:35Z

Pull power supply and reset updates from Sebastian Reichel: "This time there are lots of changes. Quite a few changes to the core, lots of driver changes and one change to kobject core (with Ack from Greg). Summary: kobject: - Increase number of allowed uevent variables power-supply core: - Add power-supply type in uevent - Cleanup property handling in core - Make property and usb_type pointers const - Convert core power-supply DT binding to YAML - Cleanup HWMON code - Add new health status "calibration required" - Add new properties for manufacture date and capacity error margin battery drivers: - new cw2015 battery driver used by pine64 Pinebook Pro laptop - axp22: blacklist on Meegopad T02 - sc27xx: support current/voltage reading - max17042: support time-to-empty reading - simple-battery: add more battery parameters - bq27xxx: convert DT binding document to YAML - sbs-battery: add TI BQ20Z65 support, fix technology property, convert DT binding to YAML, add option to disable charger broadcasts, add new properties: manufacture date, capacity error margin, average current, charge current and voltage and support calibration required health status - misc fixes charger drivers: - bq25890: cleanup, implement charge type, precharge current and input current limiting properties - bd70528: use new linear range helper library - bd99954: new charger driver - mp2629: new charger driver - misc fixes reboot drivers: - oxnas-restart: introduce new driver - syscon-reboot: convert DT binding to YAML, add parent syscon device support - misc fixes" * tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (85 commits) power: supply: cw2015: Attach OF ID table to the driver power: reset: gpio-poweroff: add missing '\n' in dev_err() Revert "power: supply: sbs-battery: simplify read_read_string_data" Revert "power: supply: sbs-battery: add PEC support" dt-bindings: power: sbs-battery: Convert to yaml power: supply: sbs-battery: constify power-supply property array power: supply: sbs-battery: switch to i2c's probe_new power: supply: sbs-battery: switch from of_property_* to device_property_* power: supply: sbs-battery: add ability to disable charger broadcasts power: supply: sbs-battery: fix idle battery status power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED support power: supply: sbs-battery: add MANUFACTURE_DATE support power: supply: sbs-battery: add POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY support power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG support power: supply: sbs-battery: add PEC support power: supply: sbs-battery: simplify read_read_string_data power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN support power: supply: sbs-battery: Add TI BQ20Z65 support power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED ...

Merge tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2020-06-05T03:11:25Z

Pull devicetree updates from Rob Herring: - Convert various DT (non-binding) doc files to ReST - Various improvements to device link code - Fix __of_attach_node_sysfs refcounting bug - Add support for 'memory-region-names' with reserved-memory binding - Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics, Shanghai Awinic Technology Co., MikroTik, Silex Insight - A bunch more binding conversions to DT schema. Only 3K to go. - Add a minimum version check for schema tools - Treewide dropping of 'allOf' usage with schema references. Not needed in new json-schema spec. - Some formatting clean-ups of schemas * tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (194 commits) dt-bindings: clock: Add documentation for X1830 bindings. dt-bindings: mailbox: Convert imx mu to json-schema dt-bindings: power: Convert imx gpcv2 to json-schema dt-bindings: power: Convert imx gpc to json-schema dt-bindings: Merge gpio-usb-b-connector with usb-connector dt-bindings: timer: renesas: cmt: Convert to json-schema dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema dt-bindings: timer: Convert i.MX GPT to json-schema dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742 dt-bindings: serial: Add binding for UART pin swap dt-bindings: geni-se: Add interconnect binding for GENI QUP dt-bindings: geni-se: Convert QUP geni-se bindings to YAML dt-bindings: vendor-prefixes: Add Silex Insight vendor prefix dt-bindings: input: touchscreen: edt-ft5x06: change reg property dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver dt-bindings: timer: renesas: mtu2: Convert to json-schema of/fdt: Remove redundant kbasename function call dt-bindings: clock: Convert i.MX1 clock to json-schema dt-bindings: clock: Convert i.MX21 clock to json-schema dt-bindings: clock: Convert i.MX25 clock to json-schema ...

Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-06-05T03:02:14Z

Pull ARM devicetree updates from Arnd Bergmann: "This is the set of device tree changes, mostly covering new hardware support, with 577 patches touching a little over 500 files. There are five new Arm SoCs supported in this release, all of them for existing SoC families: - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS devices and Android Set-top-box designs, along with the "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4 single-board computer. - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and the iW-RainboW-G21D-Qseven-RZG1H board/SoM - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO Advance game console Newly added machines on already supported SoCs are: - AMLogic S905D based Smartlabs SML-5442TW TV box - AMLogic S905X3 based ODROID-C4 SBC - AMLogic S922XH based Beelink GT-King Pro TV box - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO OpenPower P9 "Nicole" - Marvell Kirkwood based Check Point L-50 router - Mediatek MT8173 based Elm/Hana Chromebook laptops - Microchip SAMA5D2 "Industrial Connectivity Platform" reference board - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit - Octavo OSDMP15x based Linux Automation MC-1 development board - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone - Realtek RTD1295 based Xnano X5 TV Box - STMicroelectronics STM32MP1 based Stinger96 single-board computer and IoT Box - Samsung Exynos4210 based based Samsung Galaxy S2 phone - Socionext Uniphier based Akebi96 SBC - TI Keystone based K2G Evaluation board - TI am5729 based Beaglebone-AI development board Include device descriptions for additional hardware support in existing SoCs and machines based on all major SoC platforms: - AMlogic Meson - Allwinner sunxi - Arm Juno/VFP/Vexpress/Integrator - Broadcom bcm283x/bcm2711 - Hisilicon hi6220 - Marvell EBU - Mediatek MT27xx, MT76xx, MT81xx and MT67xx - Microchip SAMA5D2 - NXP i.MX6/i.MX7/i.MX8 and Layerscape - Nvidia Tegra - Qualcomm Snapdragon - Renesas r8a77961, r8a7791 - Rockchips RK32xx/RK33xx - ST-Ericsson ux500 - STMicroelectronics SMT32 - Samsung Exynos and S5PV210 - Socionext Uniphier - TI OMAP5/DRA7 and Keystone" * tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits) ARM: dts: keystone: Rename "msmram" node to "sram" arm: dts: mt2712: add uart APDMA to device tree arm64: dts: mt8183: add mmc node arm64: dts: mt2712: add ethernet device node arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1 ARM: dts: mmp3: Add the fifth SD HCI ARM: dts: berlin*: Fix up the SDHCI node names ARM: dts: mmp3: Fix USB & USB PHY node names ARM: dts: mmp3: Fix L2 cache controller node name ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa910: Fix the gpio interrupt cell number ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property ARM: dts: pxa168: Fix the gpio interrupt cell number ARM: dts: pxa168: Add missing address/size cells to i2c nodes ARM: dts: dove: Fix interrupt controller node name ARM: dts: kirkwood: Fix interrupt controller node name arm64: dts: Add SC9863A emmc and sd card nodes arm64: dts: Add SC9863A clock nodes arm64: dts: mt6358: add PMIC MT6358 related nodes ...

dt-bindings: power: Convert imx gpcv2 to json-schema

2020-06-01T22:53:48Z

Convert the i.MX GPCv2 binding to DT schema format using json-schema Example is updated based on latest DT file and consumer's example is removed since it is NOT that useful. Signed-off-by: Anson Huang Signed-off-by: Rob Herring

dt-bindings: power: Convert imx gpc to json-schema

2020-06-01T22:53:48Z

Convert the i.MX GPC binding to DT schema format using json-schema >From latest reference manual, there is actually ONLY 1 interrupt for GPC, so the additional GPC interrupt is removed. Consumer's example is also removed since it is NOT that useful. Signed-off-by: Anson Huang Signed-off-by: Rob Herring

dt-bindings: power: sbs-battery: Convert to yaml

2020-05-28T22:39:35Z

Convert sbs-battery bindings to YAML. Reviewed-by: Rob Herring Signed-off-by: Sebastian Reichel

power: supply: sbs-battery: add ability to disable charger broadcasts

2020-05-28T22:39:34Z

In certain designs, it is possible to add a battery on a populated i2c bus without an sbs compliant charger. In that case, the battery will unnecessarily and sometimes undesirably master the bus trying to write info in the charger. It is observed in many occasion that these battery "broadcasts" are even corrupting other ongoing master to slave communication. I.e. the multi-master support in the battery is inadequate. Thankfully, the CHARGER_MODE bit allows designers to disable that SBS battery behaviour. This needs to be done once when the battery is first seen on the bus. Signed-off-by: Jean-Francois Dagenais [rebased code] Signed-off-by: Sebastian Reichel

dt-bindings: power: renesas,apmu: Document r8a7742 support

2020-05-28T20:05:00Z

Document APMU and SMP enable method for RZ/G1H (also known as r8a7742) SoC. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Reviewed-by: Wolfram Sang Reviewed-by: Geert Uytterhoeven Signed-off-by: Rob Herring

power: supply: sbs-battery: Add TI BQ20Z65 support

2020-05-28T17:27:38Z

Add support for BQ20Z65 manufacturer data to the sbs-battery driver. Implementation has been verified using the public TRM available from [0] and tested using a GE Flex 3S2P battery. [0] http://www.ti.com/lit/pdf/sluu386 Acked-by: Rob Herring Signed-off-by: Sebastian Reichel