kernel.git/Documentation/devicetree/bindings/power, branch linux-4.9.y

dt-bindings: power/supply: Update TPS65217 properties

2017-08-07T01:59:44Z

[ Upstream commit 81d7358d7038dd1001547950087e5b0641732f3f ] Add interrupt specifiers for USB and AC charger input. Interrupt numbers are from the datasheet. Fix wrong property for compatible string. Signed-off-by: Milo Kim Acked-by: Rob Herring Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

power: reset: st: Remove obsolete platforms from dt doc

2016-09-19T19:33:13Z

This patch removes support for STiH415/6 SoC's from the st-restart dt binding documentation, as support for these platforms is being removed from the kernel. It also updates the dt example to a currently supported platform. Signed-off-by: Peter Griffin Cc: Signed-off-by: Sebastian Reichel

doc: bindings: power: act8945a-charger: Update properties.

2016-08-31T14:47:56Z

Due the driver improvements, update the properties, - Remove "active-semi,check-battery-temperature" property. - Add the properties, "active-semi,irq_gpio" and "active-semi,lbo-gpios". - As act8945a-charger is regarded as a sub-device, update the compatible and examples. Signed-off-by: Wenyou Yang Acked-by: Rob Herring Signed-off-by: Sebastian Reichel

power/supply: unify DT documentation

2016-08-10T23:11:29Z

Currently the power supply device tree documentation is spread in .../bindings/power_supply and .../bindings/power. This unifies the files for chargers and battery fuel gauges in .../bindings/power/supply and the ones for system reset/shutdown in .../bindings/power/reset (same structure as used for the drivers itself). Signed-off-by: Sebastian Reichel

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-08-01T22:37:45Z

Pull ARM DT updates from Olof Johansson: "Device tree contents continue to be the largest branches we submit. This time around, some of the contents worth pointing out is: New SoC platforms: - Freescale i.MX 7Solo - Broadcom BCM23550 - Cirrus Logic EP7209 and EP7211 (clps711x platforms)_ - Hisilicon HI3519 - Renesas R8A7792 Some of the other delta that is sticking out, line-count wise: - Exynos moves of IP blocks under an SoC bus, which causes a large delta due to indentation changes - a new Tegra K1 board: Apalis - a bunch of small updates to many Allwinner platforms; new hardware support, some cleanup, etc" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (426 commits) ARM: dts: sun8i: Add dts file for inet86dz board ARM: dts: sun8i: Add dts file for Polaroid MID2407PXE03 tablet ARM: dts: sun8i: Use sun8i-reference-design-tablet for ga10h dts ARM: dts: sun8i: Use sun8i-reference-design-tablet for polaroid mid2809pxe04 ARM: dts: sun8i: reference-design-tablet: Add drivevbus-supply ARM: dts: Copy sun8i-q8-common.dtsi sun8i-reference-design-tablet.dtsi ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for utoo p66 dts ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for dit4350 dts ARM: dts: sun5i: reference-design-tablet: Remove mention of q8 ARM: dts: sun5i: reference-design-tablet: Set lradc vref to avcc ARM: dts: sun5i: Rename sun5i-q8-common.dtsi sun5i-reference-design-tablet.dtsi ARM: dts: sun5i: Move q8 display bits to sun5i-a13-q8-tablet.dts ARM: dts: sunxi: Rename sunxi-q8-common.dtsi sunxi-reference-design-tablet.dtsi ARM: dts: at91: Don't build unnecessary dtbs ARM: dts: at91: sama5d3x: separate motherboard gmac and emac definitions ARM: dts: at91: at91sam9g25ek: fix isi endpoint node ARM: dts: at91: move isi definition to at91sam9g25ek ARM: dts: at91: fix i2c-gpio node name ARM: dts: at91: vinco: fix regulator name ARM: dts: at91: ariag25 : fix onewire node ...

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-08-01T22:27:08Z

Pull ARM SoC platform updates from Olof Johansson: "Improved and new platform support for various SoCs: New SoC support: - Broadcom BCM23550 - Freescale i.MX7Solo - Qualcomm MDM9615 - Renesas r8a7792 Improvements: - convert clps711x to multiplatform - debug uart improvements for Atmel platforms - Tango platform improvements: HOTPLUG_CPU, Suspend-to-ram - OMAP tweaks and improvements to hwmod - OMAP support for kexec on SMP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: davinci: fix build break because of undeclared dm365_evm_snd_data ARM: s3c64xx: smartq: Avoid sparse warnings ARM: sti: Implement dummy L2 cache's write_sec ARM: STi: Update machine _namestr to be more generic. arm: meson: explicitly select clk drivers ARM: tango: add Suspend-to-RAM support ARM: hisi: consolidate the hisilicon machine entries ARM: tango: fix CONFIG_HOTPLUG_CPU=n build MAINTAINERS: Update BCM281XX/BCM11XXX/BCM216XX entry MAINTAINERS: Update BCM63XX entry MAINTAINERS: Add NS2 entry MAINTAINERS: Fix nsp false-positives MAINTAINERS: Change L to M for Broadcom ARM/ARM64 SoC entries ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCs ARM: clps711x: Switch to MULTIPLATFORM ARM: clps711x: Remove boards support ARM: clps711x: Add basic DT support ARM: clps711x: Reduce static map size ARM: SAMSUNG: Constify iomem address passed to s5p_init_cpu ARM: oxnas: Change OX810SE default driver config ...

dt-bindings: power: reset: add document for reboot-mode driver

2016-07-06T15:15:39Z

Add device tree bindings document for reboot-mode driver. Signed-off-by: Andy Yan Acked-by: Rob Herring Reviewed-by: Krzysztof Kozlowski Signed-off-by: Sebastian Reichel

devicetree: bindings: Renesas APMU and SMP Enable method

2016-06-29T12:26:39Z

Add DT binding documentation for the APMU hardware and add "renesas,apmu" to the list of enable methods for the ARM cpus. Signed-off-by: Magnus Damm Signed-off-by: Geert Uytterhoeven Acked-by: Rob Herring Cc: devicetree@vger.kernel.org Signed-off-by: Simon Horman

max8903: adds documentation for device tree bindings.

2016-06-28T18:09:41Z

Signed-off-by: Chris Lapa Reviewed-by: Krzysztof Kozlowski Signed-off-by: Sebastian Reichel

docs: Move brcm,bcm21664-resetmgr.txt

2016-06-16T14:54:12Z

Sebastian pointed out that .../bindings/reset is usually used for peripheral reset controllers, whereas .../bindings/power/reset is used for Board/System reset controllers. Reported-by: Sebastian Reichel Signed-off-by: Chris Brand Signed-off-by: Sebastian Reichel