Hosts the 0x221E linux distro kernel. https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-4.16.y 2018-02-28T18:39:43Z 2018-02-28T18:39:43Z Linus Torvalds 2018-02-28T18:39:43Z urn:sha1:e04d368f47d1ae84a498f659a13720ee83e9f2f9 Pull DeviceTree fixes from Rob Herring: - update i.MX thermal binding example to use current binding, not the deprecated one - move arm-charlcd to auxdisplay/ - fix misspelling of "debounce-interval" * tag 'devicetree-fixes-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: power: Fix "debounce-interval" property misspelling auxdisplay: Move arm-charlcd binding to correct folder dt-bindings: thermal: imx: update the binding to new method 2018-02-19T03:05:43Z Geert Uytterhoeven 2018-02-13T14:15:27Z urn:sha1:d40ade43e3cd55c6d83859dffc0f9d428a954c63 "debounce_interval" was never supported. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> 2018-02-13T17:35:17Z Linus Torvalds 2018-02-13T17:35:17Z urn:sha1:61f14c015f5be9151ba25e638d349f4d40cb7cd4 Pull MIPS fix from James Hogan: "A single change (and associated DT binding update) to allow the address of the MIPS Cluster Power Controller (CPC) to be chosen by DT, which allows SMP to work on generic MIPS kernels where the bootloader hasn't configured the CPC address (i.e. the new Ranchu platform)" * tag 'mips_4.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: CPC: Map registers using DT in mips_cpc_default_phys_base() dt-bindings: Document mti,mips-cpc binding 2018-02-08T14:02:01Z Paul Burton 2018-01-19T15:40:48Z urn:sha1:aece34cd576c7625181b0488a8129c1e165355f7 Document a binding for the MIPS Cluster Power Controller (CPC) that allows the device tree to specify where the CPC registers are located. Signed-off-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18512/ Signed-off-by: James Hogan <jhogan@kernel.org> 2018-02-02T00:35:31Z Linus Torvalds 2018-02-02T00:35:31Z urn:sha1:fe53d1443a146326b49d57fe6336b5c2a725223f Pull ARM SoC driver updates from Arnd Bergmann: "A number of new drivers get added this time, along with many low-priority bugfixes. The most interesting changes by subsystem are: bus drivers: - Updates to the Broadcom bus interface driver to support newer SoC types - The TI OMAP sysc driver now supports updated DT bindings memory controllers: - A new driver for Tegra186 gets added - A new driver for the ti-emif sram, to allow relocating suspend/resume handlers there SoC specific: - A new driver for Qualcomm QMI, the interface to the modem on MSM SoCs - A new driver for power domains on the actions S700 SoC - A driver for the Xilinx Zynq VCU logicoreIP reset controllers: - A new driver for Amlogic Meson-AGX - various bug fixes tee subsystem: - A new user interface got added to enable asynchronous communication with the TEE supplicant. - A new method of using user space memory for communication with the TEE is added" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits) of: platform: fix OF node refcount leak soc: fsl: guts: Add a NULL check for devm_kasprintf() bus: ti-sysc: Fix smartreflex sysc mask psci: add CPU_IDLE dependency soc: xilinx: Fix Kconfig alignment soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu soc: bcm: brcmstb: Be multi-platform compatible soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms Revert "soc: brcmstb: Only register SoC device on STB platforms" bus: omap: add MODULE_LICENSE tags soc: brcmstb: Only register SoC device on STB platforms tee: shm: Potential NULL dereference calling tee_shm_register() soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver soc: xilinx: Create folder structure for soc specific drivers of: platform: populate /firmware/ node from of_platform_default_populate_init() soc: samsung: Add SPDX license identifiers soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe() tee: shm: don't put_page on null shm->pages ... 2018-02-02T00:07:54Z Linus Torvalds 2018-02-02T00:07:54Z urn:sha1:537433b6241e067de2d9da3bed5f4fed9c9eac58 Pull ARM SoC device tree updates from Arnd Bergmann: "We get a moderate number of new machines this time, and only one new SoC variant (Actions S700): Actions: - S700 Soc and CubieBoard7 development board - Allo.com Sparky Single-board-computer Allwinner: - Orange Pi R1 development board - Libre Computer Board ALL-H3-CC H3 single-board computer ASpeed ast2x00: - Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500 - Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500 - Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400 AT91: - Axentia Nattis/Natte digital signage - sama5d2 PTC-ek Evaluation board Freescale/NXP i.MX: - SolidRun Humminboard2 development board - Variscite DART-MX6 SoM and Carrier-board - Technologic TS-4600 and TS-7970 development board - Toradex Colibri iMX7D SoM board - v1.5 variant of Solidrun Cubox-i and Hummingboard Freescale/NXP Layerscape: - Moxa UC-8410A Series industrial computer Gemini: - D-Link DNS-313 NAS enclosure OMAP: - LogicPD OMAP35xx SOM-LV devkit - LogicPD OMAP35xx Torpedo devkit Renesas: - r8a77970 (V3M) Starter Kit board - r8a7795 (M3-W) Salvator-XS board We finally managed to get the dtc warnings under control, with no more build-time warnings for bad device tree files. This includes fixes for the majority of platforms, including nomadik, samsung, lpc32xx, STi, spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood, renesas, hisilicon, and broadcom. Files get rearranged on a few platforms, in particular the Marvell Armada 7K/8K device tree files are changed in preparation for future SoC support, based on more than two of the same chips in one package, and some boards get renamed for oxnas for consistency. Finally, many existing SoCs gain descriptions for additional on-chip devices that we can now support with kernel drivers: - Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG) - Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi) - Aspeed clk controller support - Freescale LS1088A, LS1021A device support - Gemini Ethernet, PCI, TVE, panel - Keystone gpio, qspi, more uarts - Mediatek cpufreq, regulator, clock, reset - Marvell thermal, cpufreq, nand - Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu - Rockchip Mipi, GPU, display - Samsung Exynos5433 PMU, power domain, nfc - Spreadtrum: sc9860 clocks - Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..." * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits) arm64: dts: stratix10: fix SPI settings ARM: dts: socfpga: add i2c reset signals arm64: dts: stratix10: add USB ECC reset bit arm64: dts: stratix10: enable USB on the devkit ARM: dts: socfpga: disable over-current for Arria10 USB devkit ARM: dts: Nokia N9: add support for up/down keys in the dts ARM: dts: nomadik: add interrupt-parent for clcd ARM: dts: Add ethernet to a bunch of platforms ARM: dts: Add ethernet to the Gemini SoC ARM: dts: rename oxnas dts files ARM: dts: s5pv210: add interrupt-parent for ohci ARM: lpc3250: fix uda1380 gpio numbers ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones ARM: dts: n900: Add aliases for lcd and tvout displays ARM: dts: Update ti-sysc data for existing users ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string arm: spear13xx: Fix spics gpio controller's warning arm: spear13xx: Fix dmas cells ... 2018-01-31T20:55:31Z Linus Torvalds 2018-01-31T20:55:31Z urn:sha1:972058ad79b124086d931b6a0a25fb9bb52502dc Pull power supply and reset updates from Sebastian Reichel: - bq27xxx: add bq27521 support - drop unused imx-snvs-poweroff driver - improve axp288 driver - misc fixes * tag 'for-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits) power: supply: max17042_battery: Always fall back to default platform-data power: supply: max17042_battery: Check battery current for status when supplied MAINTAINERS: Add AXP288 PMIC entry power: supply: axp288_fuel_gauge: Do not register our psy on (some) HDMI sticks power: supply: axp288_fuel_gauge: Optimize get_current() power: supply: axp288_fuel_gauge: Rework get_status() power: reset: account for const type of of_device_id.data power: supply: account for const type of of_device_id.data bq24190: Simplify code in property_is_writeable power: supply: axp288_fuel_gauge: Get iio-channels once during boot power: supply: axp288_charger: Properly stop work on probe-error / remove power: supply: axp288_charger: Simplify extcon cable handling power: supply: axp288_charger: Use the right property for the input current limit power: supply: axp288_charger: Pick lower input current limit not higher power: supply: axp288_charger: Do not cache input current limit value power: supply: axp288_charger: Remove no longer needed locking power: supply: axp288_charger: Use regmap_update_bits to set the input limits power: supply: axp288_charger: Cleanup some double empty lines power: supply: axp288_charger: Remove charger-enabled state tracking power: supply: axp288_charger: Add missing newlines to some messages ... 2018-01-22T11:36:57Z Arnd Bergmann 2018-01-22T11:36:57Z urn:sha1:6ab1e867acb9d73c36dd60dd1c97da1b74a42e0d Pull "Few omap interconnect dts fixes for v4.16 merge window" from Tony Lindgren: Now that we have the dts clocks for the clkctrl clock and the interconnect binding, we need to update the existing ti-sysc users according to the binding to make it usable for drivers. Apologies for not being able to send this earlier but it took me few revisions to get the smartreflex changes right and tested with yet to be posted patches to make smartreflex probe with dts and I wanted to have it sit in next for a while to make sure we're not introducing regressions for legacy platform data based booting. Note that this is based on a merge with commit 20a2742e5784 ("dt-bindings: ti-sysc: Update binding for timers and capabilities") to avoid a merge conflict with the binding changes. * tag 'omap-for-v4.16/dt-clk-dts-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Update ti-sysc data for existing users ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance dt-bindings: ti-sysc: Update binding for timers and capabilities 2018-01-12T23:15:56Z Tony Lindgren 2018-01-10T18:14:15Z urn:sha1:7d9bfdac31d77305a28531033e604264ae3e449c The smartreflex instance for mpu and iva is shared. Let's fix this as I've already gotten confused myself few times wondering where the mpu instance is. Note that we are still probing the driver using platform data so this change is safe to do. Signed-off-by: Tony Lindgren <tony@atomide.com> 2018-01-08T17:09:25Z Dong Aisheng 2017-12-22T10:28:59Z urn:sha1:baf61639b808307bd6e5be27e5cbef9cc3acd80e There's no user of it in kernel now and it basically functions the same as the generic syscon-poweroff.c to which we have already switched. So let's remove it. Cc: Robin Gong <yibin.gong@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>