kernel.git/Documentation/devicetree/bindings/pinctrl, branch linux-4.8.y

Merge tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux

2016-08-02T01:44:08Z

Merge drm updates from Dave Airlie: "This is the main drm pull request for 4.8. I'm down with a cold at the moment so hopefully this isn't in too bad a state, I finished pulling stuff last week mostly (nouveau fixes just went in today), so only this message should be influenced by illness. Apologies to anyone who's major feature I missed :-) Core: Lockless GEM BO freeing Non-blocking atomic work Documentation changes (rst/sphinx) Prep for new fencing changes Simple display helpers Master/auth changes Register/unregister rework Loads of trivial patches/fixes. New stuff: ARM Mali display driver (not the 3D chip) sii902x RGB->HDMI bridge Panel: Support for new panels Improved backlight support Bridge: Convert ADV7511 to bridge driver ADV7533 support TC358767 (DSI/DPI to eDP) encoder chip support i915: BXT support enabled by default GVT-g infrastructure GuC command submission and fixes BXT workarounds SKL/BKL workarounds Demidlayering device registration Thundering herd fixes Missing pci ids Atomic updates amdgpu/radeon: ATPX improvements for better dGPU power control on PX systems New power features for CZ/BR/ST Pipelined BO moves and evictions in TTM GPU scheduler improvements GPU reset improvements Overclocking on dGPUs with amdgpu Polaris powermanagement enabled nouveau: GK20A/GM20B volt and clock improvements. Initial support for GP100/GP104 GPUs, GP104 will not yet support acceleration due to NVIDIA having not released firmware for them as of yet. exynos: Exynos5433 SoC with IOMMU support. vc4: Shader validation for branching imx-drm: Atomic mode setting conversion Reworked DMFC FIFO allocation External bridge support analogix-dp: RK3399 eDP support Lots of fixes. rockchip: Lots of small fixes. msm: DT bindings cleanups Shrinker and madvise support ASoC HDMI codec support tegra: Host1x driver cleanups SOR reworking for DP support Runtime PM support omapdrm: PLL enhancements Header refactoring Gamma table support arcgpu: Simulator support virtio-gpu: Atomic modesetting fixes. rcar-du: Misc fixes. mediatek: MT8173 HDMI support sti: ASOC HDMI codec support Minor fixes fsl-dcu: Suspend/resume support Bridge support amdkfd: Minor fixes. etnaviv: Enable GPU clock gating hisilicon: Vblank and other fixes" * tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits) drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup drm/nouveau/acpi: fix lockup with PCIe runtime PM drm/nouveau/acpi: check for function 0x1B before using it drm/nouveau/acpi: return supported DSM functions drm/nouveau/acpi: ensure matching ACPI handle and supported functions drm/nouveau/fbcon: fix font width not divisible by 8 drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce drm/amdgpu: add query device id and revision id into system info entry at CGS drm/amdgpu: add new definition in bif header drm/amd/powerplay: rename smum header guards drm/amdgpu: enable UVD context buffer for older HW drm/amdgpu: fix default UVD context size drm/amdgpu: fix incorrect type of info_id drm/amdgpu: make amdgpu_cgs_call_acpi_method as static drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build drm/amdgpu: enable UVD VM only on polaris drm/amdgpu: increase timeout of IB test drm/amdgpu: add destroy session when generate VCE destroy msg. drm/amd: fix deadlock of job_list_lock V2 ...

Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2016-08-01T22:47:01Z

Pull 64-bit ARM DT updates from Olof Johansson: "Just as the 32-bit contents, the 64-bit device tree branch also contains a number of additions this release cycle. New platforms: - LG LG1313 - Mediatek MT6755 - Renesas r8a7796 - Broadcom 2837 Other platforms with larger updates are: - Nvidia X1 platforms (USB 3.0, regulators, display subsystem) - Mediatek MT8173 (display subsystem added) - Rockchip RK3399 (a lot of new peripherals) - ARM Juno reference implementation (SCPI power domains, coresight, thermal)" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits) arm64: tegra: Enable HDMI on Jetson TX1 arm64: tegra: Add sor1_src clock arm64: tegra: Add XUSB powergates on Tegra210 arm64: tegra: Add DPAUX pinctrl bindings arm64: tegra: Add ACONNECT bus node for Tegra210 arm64: tegra: Add audio powergate node for Tegra210 arm64: tegra: Add regulators for Tegra210 Smaug arm64: tegra: Correct Tegra210 XUSB mailbox interrupt arm64: tegra: Enable XUSB controller on Jetson TX1 arm64: tegra: Enable debug serial on Jetson TX1 arm64: tegra: Add Tegra210 XUSB controller arm64: tegra: Add Tegra210 XUSB pad controller arm64: tegra: Add DSI panel on Jetson TX1 arm64: tegra: p2597: Add SDMMC power supplies arm64: tegra: Add PMIC support on Jetson TX1 Revert "ARM64: DTS: meson-gxbb: switch ethernet to real clock" arm64: dts: hi6220: Add pl031 RTC support arm64: dts: r8a7796/salvator-x: Enable watchdog timer arm64: dts: r8a7796: Add RWDT node arm64: dts: r8a7796: Use SYSC "always-on" PM Domain ...

pinctrl: Update iProc GPIO DT bindings

2016-07-22T14:45:04Z

Update the iProc GPIO binding document to add new compatible strings "brcm,iproc-nsp-gpio" and "brcm,iproc-stingray-gpio" to support the iProc based GPIO controller used in the NSP and Stingray SoCs, respectively Signed-off-by: Ray Jui Acked-by: Rob Herring Signed-off-by: Linus Walleij

pinctrl: qcom: update DT bindings with ebi2 groups

2016-07-08T17:40:45Z

This adds the ebi2 and ebi2cs groups to the MSM8660 pin control documentation document. Cc: devicetree@vger.kernel.org Cc: Andy Gross Cc: Björn Andersson Cc: Stephen Boyd Signed-off-by: Linus Walleij

Documentation: dt: Add new compatible to STM32 pinctrl driver bindings

2016-07-05T15:02:23Z

Signed-off-by: Alexandre TORGUE Signed-off-by: Linus Walleij

dt-bindings: Add bindings for Tegra DPAUX pinctrl driver

2016-06-30T10:45:10Z

On Tegra124, Tegra132 and Tegra210 devices the pads used by the Display Port Auxiliary (DPAUX) channel are multiplexed such that they can also be used by one of the internal I2C controllers. Note that this is different from I2C-over-AUX supported by the DPAUX controller. The register that configures these pads is part of the DPAUX controllers register set and so a pinctrl driver is being added for the DPAUX device to share these pads. Add the device-tree binding documentation for the DPAUX pad controller. Although there is only one group of pads associated with the DPAUX that can be multiplexed, the group still needs to be described by the binding. If the 'groups' property is not present in the binding, then the pads will not be allocated by the pinctrl core for a client and this would allow another client to re-configure the same pads that may already be in-use. Please note that although the "off" function for the DPAUX pads is not technically a pin-mux setting but more of a pin-conf setting it is simpler to expose these as a function so that the user can simply select either "aux", "i2c" or "off" as the current function/mode. Update the main DPAUX binding documentation to reference the DPAUX pad controller binding document and add the 'i2c-bus' subnode. The 'i2c-bus' subnode is used for populating I2C slaves for the DPAUX device so that the I2C driver core does not attempt to add the DPAUX pad controller nodes as I2C slaves. Signed-off-by: Jon Hunter Acked-by: Rob Herring Signed-off-by: Thierry Reding

pinctrl: qcom: msm8974: Add hsic_ctl pinmux

2016-06-29T08:14:46Z

The msm8974 pinctrl variant has a couple USB HSIC "glue" registers that let us mux between the pinctrl register settings or the HSIC core settings for the HSIC pins (gpio 144 and gpio 145). Support this method of operation by adding hsic_data and hsic_strobe pins that can select between hsic_ctl and gpio functions. This allows us to toggle the hsic pin configuration over to the HSIC core at runtime. Cc: Bjorn Andersson Signed-off-by: Stephen Boyd Signed-off-by: Linus Walleij

dt-bindings: pinctrl: Add MDM9615 TLMM bindings

2016-06-29T08:11:50Z

Signed-off-by: Neil Armstrong Acked-by: Rob Herring Acked-by: Björn Andersson Signed-off-by: Linus Walleij

pinctrl: Broadcom NSP pinctrl device tree bindings

2016-06-29T08:04:43Z

Device tree binding documentation for Broadcom NSP IOMUX driver Signed-off-by: Yendapally Reddy Dhananjaya Reddy Signed-off-by: Linus Walleij

Merge tag 'sh-pfc-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel

2016-06-29T08:02:06Z

pinctrl: sh-pfc: Updates for v4.8 - Voltage switching support for R-Car H3, - DRIF pin support for R-Car H3, - Cleanups and fixes.