<feed xmlns='http://www.w3.org/2005/Atom'>
<title>kernel.git/Documentation/devicetree/bindings/pinctrl, branch linux-4.19.y</title>
<subtitle>Hosts the 0x221E linux distro kernel.
</subtitle>
<id>https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-4.19.y</id>
<link rel='self' href='https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-4.19.y'/>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/'/>
<updated>2021-12-01T08:27:41Z</updated>
<entry>
<title>pinctrl: armada-37xx: Correct PWM pins definitions</title>
<updated>2021-12-01T08:27:41Z</updated>
<author>
<name>Marek Behún</name>
</author>
<published>2021-11-24T23:04:58Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=72168c3cce9bbb02e955854880636f6ec50e1cda'/>
<id>urn:sha1:72168c3cce9bbb02e955854880636f6ec50e1cda</id>
<content type='text'>
commit baf8d6899b1e8906dc076ef26cc633e96a8bb0c3 upstream.

The PWM pins on North Bridge on Armada 37xx can be configured into PWM
or GPIO functions. When in PWM function, each pin can also be configured
to drive low on 0 and tri-state on 1 (LED mode).

The current definitions handle this by declaring two pin groups for each
pin:
- group "pwmN" with functions "pwm" and "gpio"
- group "ledN_od" ("od" for open drain) with functions "led" and "gpio"

This is semantically incorrect. The correct definition for each pin
should be one group with three functions: "pwm", "led" and "gpio".

Change the "pwmN" groups to support "led" function.

Remove "ledN_od" groups. This cannot break backwards compatibility with
older device trees: no device tree uses it since there is no PWM driver
for this SOC yet. Also "ledN_od" groups are not even documented.

Fixes: b835d6953009 ("pinctrl: armada-37xx: swap polarity on LED group")
Signed-off-by: Marek Behún &lt;kabel@kernel.org&gt;
Acked-by: Rob Herring &lt;robh@kernel.org&gt;
Link: https://lore.kernel.org/r/20210719112938.27594-1-kabel@kernel.org
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Marek Behún &lt;kabel@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>pinctrl: armada-37xx: Correct mpp definitions</title>
<updated>2021-12-01T08:27:41Z</updated>
<author>
<name>Marek Behún</name>
</author>
<published>2021-11-24T23:04:56Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=601f8bf68a8f33445cde54ff39810f081f856c97'/>
<id>urn:sha1:601f8bf68a8f33445cde54ff39810f081f856c97</id>
<content type='text'>
commit 823868fceae3bac07cf5eccb128d6916e7a5ae9d upstream.

This is a cleanup and fix of the patch by Ken Ma &lt;make@marvell.com&gt;.

Fix the mpp definitions according to newest revision of the
specification:
  - northbridge:
    fix pmic1 gpio number to 7
    fix pmic0 gpio number to 6
  - southbridge
    split pcie1 group bit mask to BIT(5) and  BIT(9)
    fix ptp group bit mask to BIT(11) | BIT(12) | BIT(13)
    add smi group with bit mask BIT(4)

[gregory: split the pcie group in 2, as at hardware level they can be
configured separately]
Signed-off-by: Marek Behún &lt;marek.behun@nic.cz&gt;
Signed-off-by: Gregory CLEMENT &lt;gregory.clement@bootlin.com&gt;
Tested-by: Miquel Raynal &lt;miquel.raynal@bootlin.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Signed-off-by: Marek Behún &lt;kabel@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>Merge tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd</title>
<updated>2018-08-20T22:38:44Z</updated>
<author>
<name>Linus Torvalds</name>
</author>
<published>2018-08-20T22:38:44Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=532c2b926dda11174700333a5dda5e3c0ee383f2'/>
<id>urn:sha1:532c2b926dda11174700333a5dda5e3c0ee383f2</id>
<content type='text'>
Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver
   - Add ChromeOS EC CEC driver
   - Add ROHM BD71837 PMIC driver

  New Device Support:
   - Add support for Dialog Semi DA9063L PMIC variant to DA9063
   - Add support for Intel Ice Lake to Intel-PLSS-PCI
   - Add support for X-Powers AXP806 to AXP20x

  New Functionality:
   - Add support for USB Charging to the ChromeOS Embedded Controller
   - Add support for HDMI CEC to the ChromeOS Embedded Controller
   - Add support for HDMI CEC to Intel HDMI
   - Add support for accessory detection to Madera devices
   - Allow individual pins to be configured via DT' wlf,csnaddr-pd
   - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp

  Fix-upsL
   - Trivial renaming/spelling fixes; cros_ec, da9063-*
   - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc
   - Transition to helper macros/functions; da9063-*
   - Constify; kempld-core
   - Improve error path/messages; wm8994-core
   - Disable IRQs locally instead of relying on USB subsystem; dln2
   - Remove unused code; rave-sp
   - New exports; sec-core

  Bug Fixes:
   - Fix possible false I2C transaction error; arizona-core
   - Fix declared memory area size; hi655x-pmic
   - Fix checksum type; rave-sp
   - Fix incorrect default serial port configuration: rave-sp
   - Fix incorrect coherent DMA mask for sub-devices; sm501"

* tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
  mfd: madera: Add register definitions for accessory detect
  mfd: sm501: Set coherent_dma_mask when creating subdevices
  mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC
  mfd: bd71837: Core driver for ROHM BD71837 PMIC
  media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC
  mfd: sec-core: Export OF module alias table
  mfd: as3722: Disable auto-power-on when AC OK
  mfd: axp20x: Support AXP806 in I2C mode
  mfd: axp20x: Add self-working mode support for AXP806
  dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806
  mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts
  mfd: wm8994: Allow to configure Speaker Mode Pullup from dts
  mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it
  mfd: rave-sp: Add legacy watchdog ping command translation
  mfd: rave-sp: Add legacy EEPROM access command translation
  mfd: rave-sp: Initialize flow control and parity of the port
  mfd: rave-sp: Fix incorrectly specified checksum type
  mfd: rave-sp: Remove unused defines
  mfd: hi655x: Fix regmap area declared size for hi655x
  mfd: ti_am335x_tscadc: Fix struct clk memory leak
  ...
</content>
</entry>
<entry>
<title>Merge tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core</title>
<updated>2018-08-18T18:44:53Z</updated>
<author>
<name>Linus Torvalds</name>
</author>
<published>2018-08-18T18:44:53Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=a18d783fedfe6f9b720afe901db9501ce116ed81'/>
<id>urn:sha1:a18d783fedfe6f9b720afe901db9501ce116ed81</id>
<content type='text'>
Pull driver core updates from Greg KH:
 "Here are all of the driver core and related patches for 4.19-rc1.

  Nothing huge here, just a number of small cleanups and the ability to
  now stop the deferred probing after init happens.

  All of these have been in linux-next for a while with only a merge
  issue reported"

* tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
  base: core: Remove WARN_ON from link dependencies check
  drivers/base: stop new probing during shutdown
  drivers: core: Remove glue dirs from sysfs earlier
  driver core: remove unnecessary function extern declare
  sysfs.h: fix non-kernel-doc comment
  PM / Domains: Stop deferring probe at the end of initcall
  iommu: Remove IOMMU_OF_DECLARE
  iommu: Stop deferring probe at end of initcalls
  pinctrl: Support stopping deferred probe after initcalls
  dt-bindings: pinctrl: add a 'pinctrl-use-default' property
  driver core: allow stopping deferred probe after init
  driver core: add a debugfs entry to show deferred devices
  sysfs: Fix internal_create_group() for named group updates
  base: fix order of OF initialization
  linux/device.h: fix kernel-doc notation warning
  Documentation: update firmware loader fallback reference
  kobject: Replace strncpy with memcpy
  drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number
  kernfs: Replace strncpy with memcpy
  device: Add #define dev_fmt similar to #define pr_fmt
  ...
</content>
</entry>
<entry>
<title>Merge tag 'devicetree-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux</title>
<updated>2018-08-14T19:41:49Z</updated>
<author>
<name>Linus Torvalds</name>
</author>
<published>2018-08-14T19:41:49Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=4d88e3d24905eafa98cef0fc29365649ad8977b5'/>
<id>urn:sha1:4d88e3d24905eafa98cef0fc29365649ad8977b5</id>
<content type='text'>
Pull Devicetree updates from Rob Herring:

 - Remove an obsolete hack for PPC32 longtrail systems

 - Make of_io_request_and_map() "name" arg optional

 - Add vendor prefixes for bitmain, Asus, and Y Soft

 - Remove 'interrupt-parent' from bindings as it is implicit

 - New properties for wm8994 audio codec

 - Add 'clocks' property support to SRAM binding

 - Add binding for ASPEED coprocessor interrupt controller

 - Various binding spelling and link fixes

* tag 'devicetree-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  Documentation: remove dynamic-resolution-notes reference to non-existent file
  dt-bindings: Add Y Soft Corporation vendor prefix
  of/fdt: Remove PPC32 longtrail hack in memory scan
  dt-bindings: remove 'interrupt-parent' from bindings
  pinctrl: tegra: fix spelling in devicetree binding document
  usb: dwc3: rockchip: Fix PHY documentation links.
  dt-bindings: sound: wm8994: document wlf,csnaddr-pd property
  dt-bindings: sound: wm8994: document wlf,spkmode-pu property
  dt-bindings: sram: Add 'clocks' as an optional property
  dt-bindings: Add vendor prefix for AsusTek Computer Inc.
  dt-bindings: misc: ASPEED coprocessor interrupt controller
  dt-bindings: gpio: pca953x: Document interrupts, update example
  drivers/of: Make of_io_request_and_map() "name" argument optional
  dt-bindings: Add bitmain vendor prefix
  Documentation: devicetree: tilcdc: fix spelling mistake "suppors" -&gt; "supports"
</content>
</entry>
<entry>
<title>dt-bindings: pinctrl: add syscfg mask parameter</title>
<updated>2018-07-29T20:13:38Z</updated>
<author>
<name>Ludovic Barre</name>
</author>
<published>2018-07-17T09:56:26Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=de1d08b229746fc650c56ce7ddff34b1c8e778df'/>
<id>urn:sha1:de1d08b229746fc650c56ce7ddff34b1c8e778df</id>
<content type='text'>
This patch adds mask parameter to define IRQ mux field.
This field could vary depend of IRQ mux selection register.
This parameter is needed if the mask is different of 0xf.

Signed-off-by: Ludovic Barre &lt;ludovic.barre@st.com&gt;
Acked-by: Alexandre TORGUE &lt;alexandre.torgue@st.com&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
</entry>
<entry>
<title>pinctrl: stm32: fix bank io port number</title>
<updated>2018-07-29T20:01:34Z</updated>
<author>
<name>Alexandre Torgue</name>
</author>
<published>2018-07-16T12:57:36Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=3b8283f007cbf09eee64804606af23af5f734d54'/>
<id>urn:sha1:3b8283f007cbf09eee64804606af23af5f734d54</id>
<content type='text'>
In case the exti line is not in line with the bank number (that is the case
when there is an hole between two banks, for example GPIOK and then GPIOZ),
use "st,bank-ioport" DT property to get the right exti line.

Signed-off-by: Amelie Delaunay &lt;amelie.delaunay@st.com&gt;
Signed-off-by: Alexandre Torgue &lt;alexandre.torgue@st.com&gt;
Reviewed-by: Rob Herring &lt;robh@kernel.org&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
</content>
</entry>
<entry>
<title>Merge branches 'ib-mfd-4.19', 'ib-mfd-gpio-pinctrl-4.19', 'ib-mfd-i915-media-platform-4.19' and 'ib-mfd-regulator-4.19', tag 'ib-platform-chrome-mfd-move-cros-ec-transport-for-4.19' into ibs-for-mfd-merged</title>
<updated>2018-07-27T07:11:37Z</updated>
<author>
<name>Lee Jones</name>
</author>
<published>2018-07-27T07:11:37Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=e5ff19cf75f33a4654fc54631577146a1162d527'/>
<id>urn:sha1:e5ff19cf75f33a4654fc54631577146a1162d527</id>
<content type='text'>
Immutable branch (mfd, chrome) due for the v4.19 window

Immutable Branch which moves the cros_ec_i2c and cros_ec_spi
transport drivers from mfd to platform/chrome. Changes in arm are a simple
rename in defconfigs. Change in input is a rename in help text.
</content>
</entry>
<entry>
<title>Merge tag 'samsung-pinctrl-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel</title>
<updated>2018-07-25T20:47:03Z</updated>
<author>
<name>Linus Walleij</name>
</author>
<published>2018-07-25T20:47:03Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=8c17dee1706d3bc5861513145b762d1a63abda9f'/>
<id>urn:sha1:8c17dee1706d3bc5861513145b762d1a63abda9f</id>
<content type='text'>
Samsung pinctrl drivers changes for v4.19

1. Add handling of external wakeup interrupts mask inside the pin
   controller driver.

   Existing solution is spread between the driver and machine code.  The
   machine code writes the mask but its value is taken from pin
   controller driver.

   This moves everything into pin controller driver allowing later to
   remove the cross-subsystem interaction.  Also this is a necessary
   step for implementing later Suspend to RAM on ARMv8 Exynos5433.

2. Bring necessary suspend/resume callbacks for Exynos542x and
   Exynos5260.

3. Document hidden requirement about one external wakeup interrupts
   device node.

4. Minor documentation cleanups.
</content>
</entry>
<entry>
<title>dt-bindings: remove 'interrupt-parent' from bindings</title>
<updated>2018-07-25T20:09:39Z</updated>
<author>
<name>Rob Herring</name>
</author>
<published>2018-07-23T21:59:44Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=791d3ef2e11100449837dc0b6fe884e60ca3a484'/>
<id>urn:sha1:791d3ef2e11100449837dc0b6fe884e60ca3a484</id>
<content type='text'>
'interrupt-parent' is often documented as part of define bindings, but
it is really outside the scope of a device binding. It's never required
in a given node as it is often inherited from a parent node. Or it can
be implicit if a parent node is an 'interrupt-controller' node. So
remove it from all the binding files.

Cc: Mark Rutland &lt;mark.rutland@arm.com&gt;
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring &lt;robh@kernel.org&gt;
</content>
</entry>
</feed>
