kernel.git/Documentation/devicetree/bindings/net, branch linux-4.9.y

dt-bindings: net: correct interrupt flags in examples

2020-12-11T12:37:58Z

[ Upstream commit 4d521943f76bd0d1e68ea5e02df7aadd30b2838a ] GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH Fixes: a1a8b4594f8d ("NFC: pn544: i2c: Add DTS Documentation") Fixes: 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver") Fixes: e3b329221567 ("dt-bindings: can: tcan4x5x: Update binding to use interrupt property") Signed-off-by: Krzysztof Kozlowski Acked-by: Rob Herring Acked-by: Marc Kleine-Budde # for tcan4x5x.txt Link: https://lore.kernel.org/r/20201026153620.89268-1-krzk@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

dt-bindings: can: mcp251x: add mcp25625 support

2019-07-21T07:05:53Z

[ Upstream commit 0df82dcd55832a99363ab7f9fab954fcacdac3ae ] Fully compatible with mcp2515, the mcp25625 have integrated transceiver. This patch add the mcp25625 to the device tree bindings documentation. Signed-off-by: Sean Nyekjaer Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

ARM: dts: at91: add new compatibility string for macb on sama5d3

2018-10-18T07:13:20Z

[ Upstream commit 321cc359d899a8e988f3725d87c18a628e1cc624 ] We need this new compatibility string as we experienced different behavior for this 10/100Mbits/s macb interface on this particular SoC. Backward compatibility is preserved as we keep the alternative strings. Signed-off-by: Nicolas Ferre Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: dsa: qca8k: Add QCA8334 binding documentation

2018-08-03T05:55:26Z

commit 218bbea11a777c156eb7bcbdc72867b32ae10985 upstream. Add support for the four-port variant of the Qualcomm QCA833x switch. The CPU port default link settings can be reconfigured using a fixed-link sub-node. Signed-off-by: Michal Vokáč Reviewed-by: Rob Herring Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

dt-bindings: net: meson-dwmac: new compatible name for AXG SoC

2018-08-03T05:55:24Z

[ Upstream commit 7e5d05e18ba1ed491c6f836edee7f0b90f3167bc ] We need to introduce a new compatible name for the Meson-AXG SoC in order to support the RMII 100M ethernet PHY, since the PRG_ETH0 register of the dwmac glue layer is changed from previous old SoC. Signed-off-by: Yixun Lan Reviewed-by: Rob Herring Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: dsa: b53: Add BCM5389 support

2018-06-26T00:08:05Z

[ Upstream commit a95691bc54af1ac4b12c354f91e9cabf1cb068df ] This patch adds support for the BCM5389 switch connected through MDIO. Signed-off-by: Damien Thébault Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface types

2017-07-05T12:40:27Z

[ Upstream commit 34c55cf2fc75f8bf6ba87df321038c064cf2d426 ] Currently dp83867 driver returns error if phy interface type PHY_INTERFACE_MODE_RGMII_RXID is used to set the rx only internal delay. Similarly issue happens for PHY_INTERFACE_MODE_RGMII_TXID. Fix this by checking also the interface type if a particular delay value is missing in the phy dt bindings. Also update the DT document accordingly. Signed-off-by: Murali Karicheri Signed-off-by: Sekhar Nori Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Documentation: devicetree: change the mediatek ethernet compatible string

2017-07-05T12:40:24Z

[ Upstream commit 61976fff20f92aceecc3670f6168bfc57a79e047 ] When the binding was defined, I was not aware that mt2701 was an earlier version of the SoC. For sake of consistency, the ethernet driver should use mt2701 inside the compat string as this is the earliest SoC with the ethernet core. The ethernet driver is currently of no real use until we finish and upstream the DSA driver. There are no users of this binding yet. It should be safe to fix this now before it is too late and we need to provide backward compatibility for the mt7623-eth compat string. Reported-by: Sean Wang Signed-off-by: John Crispin Reviewed-by: Matthias Brugger Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

dt: bindings: net: use boolean dt properties for eee broken modes

2017-07-05T12:40:20Z

[ Upstream commit 308d3165d8b2b98d3dc3d97d6662062735daea67 ] The patches regarding eee-broken-modes was merged before all people involved could find an agreement on the best way to move forward. While we agreed on having a DT property to mark particular modes as broken, the value used for eee-broken-modes mapped the phy register in very direct way. Because of this, the concern is that it could be used to implement configuration policies instead of describing a broken HW. In the end, having a boolean property for each mode seems to be preferred over one bit field value mapping the register (too) directly. Cc: Florian Fainelli Signed-off-by: Jerome Brunet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Documentation: devicetree: clarify usage of the RGMII phy-modes

2016-11-28T17:06:54Z

RGMII requires special RX and/or TX delays depending on the actual hardware circuit/wiring. These delays can be added by the MAC, the PHY or the designer of the circuit (the latter means that no delay has to be added by PHY or MAC). There are 4 RGMII phy-modes used describe where a delay should be applied: - rgmii: the RX and TX delays are either added by the MAC (where the exact delay is typically configurable, and can be turned off when no extra delay is needed) or not needed at all (because the hardware wiring adds the delay already). The PHY should neither add the RX nor TX delay in this case. - rgmii-rxid: configures the PHY to enable the RX delay. The MAC should not add the RX delay in this case. - rgmii-txid: configures the PHY to enable the TX delay. The MAC should not add the TX delay in this case. - rgmii-id: combines rgmii-rxid and rgmii-txid and thus configures the PHY to enable the RX and TX delays. The MAC should neither add the RX nor TX delay in this case. Document these cases in the ethernet.txt documentation to make it clear when to use each mode. If applied incorrectly one might end up with MAC and PHY both enabling for example the TX delay, which breaks ethernet TX traffic on 1000Mbit/s links. Signed-off-by: Martin Blumenstingl Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller