kernel.git/Documentation/devicetree/bindings/net/dsa, branch linux-4.12.y

Doc: net: dsa: b53: update location of referenced dsa.txt

2017-06-15T19:02:40Z

The referenced file dsa.txt is located at Documentation/devicetree/bindings/net/dsa/dsa.txt Reviewed-by: Florian Fainelli Signed-off-by: Heinrich Schuchardt Signed-off-by: David S. Miller

net: dsa: mv88e6xxx: Add eeprom-length to binding

2017-05-27T22:42:11Z

The binding documentation for the mv88e6xxx switch is missing the eeprom-length property, which has been implemented since May 2016, commit f8cd8753def0 ("dsa: mv88e6xxx: Handle eeprom-length property") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: LAN9303: add MDIO managed mode support

2017-04-20T17:48:55Z

When the LAN9303 device is in MDIO manged mode, all register accesses must be done via MDIO. Please note: this code is compile time tested only due to the absence of such configured hardware. It is based on a patch from Stefan Roese from 2014. Signed-off-by: Juergen Borleis CC: devicetree@vger.kernel.org CC: robh+dt@kernel.org CC: mark.rutland@arm.com CC: sr@denx.de Acked-by: Rob Herring Signed-off-by: David S. Miller

net: dsa: LAN9303: add I2C managed mode support

2017-04-20T17:48:54Z

In this mode the switch device and the internal phys will be managed via I2C interface. The MDIO interface is still supported, but for the (emulated) CPU port only. Signed-off-by: Juergen Borleis CC: devicetree@vger.kernel.org CC: robh+dt@kernel.org CC: mark.rutland@arm.com Acked-by: Rob Herring Signed-off-by: David S. Miller

dt-bindings: net: dsa: add Mediatek MT7530 binding

2017-04-07T20:50:55Z

Add device-tree binding for Mediatek MT7530 switch. Cc: devicetree@vger.kernel.org Signed-off-by: Sean Wang Acked-by: Rob Herring Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

Doc: DT: bindings: net: dsa: marvell.txt: Tabification

2017-01-25T18:20:00Z

Replace spaces with tabs. Fix indentation to be multiples of tabs, not a mixture or tabs and spaces. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: mv88e6xxx: Support multiple MDIO busses

2017-01-24T20:33:51Z

The mv88e6390 has multiple MDIO busses. Generalize the parsing of the device tree to support multiple mdio nodes. The external mdio bus has a compatible strings to indicate it is external. Keep a linked list of busses, placing the external mdio bus at the tail of the list. When within the driver an mdio bus is needed, e.g. for EEE or SERDES, use the head of the list which should be the internal bus. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: make "label" property optional for dsa2

2017-01-11T14:26:15Z

In the new DTS bindings for DSA (dsa2), the "ethernet" and "link" phandles are respectively mandatory and exclusive to CPU port and DSA link device tree nodes. Simplify dsa2.c a bit by checking the presence of such phandle instead of checking the redundant "label" property. Then the Linux philosophy for Ethernet switch ports is to expose them to userspace as standard NICs by default. Thus use the standard enumerated "eth%d" device name if no "label" property is provided for a user port. This allows to save DTS files from subjective net device names. If one wants to rename an interface, udev rules can be used as usual. Of course the current behavior is unchanged, and the optional "label" property for user ports has precedence over the enumerated name. Signed-off-by: Vivien Didelot Acked-by: Uwe Kleine-König Signed-off-by: David S. Miller

net: dsa: mv88e6xxx: Add the mv88e6390 family

2016-11-22T14:55:30Z

With the devices added to the tables, the probe will recognize the switch. This however is not sufficient to make it work properly, other changes are needed because of incompatibilities. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: mv88e6xxx: Implement interrupt support.

2016-10-17T15:18:08Z

The switch can have up to two interrupt controllers. One of these contains the interrupts from the integrated PHYs, so is useful to export. The Marvell PHY driver can then be used in interrupt mode, rather than polling, speeding up PHY handling and reducing load on the MDIO bus. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller