kernel.git/Documentation/devicetree/bindings/net/can, branch master

dt-bindings: net: can: nxp,sja1000: add reference to mc-peripheral-props.yaml

2026-03-02T10:23:40Z

Add a reference to mc-peripheral-props.yaml to allow vendor-specific properties for memory access timings. Fix below CHECK_DTBS warings: arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dtb: can@4,0 (nxp,sja1000): Unevaluated properties are not allowed ('fsl,weim-cs-timing' was unexpected) from schema $id: http://devicetree.org/schemas/net/can/nxp,sja1000.yaml Signed-off-by: Frank Li Reviewed-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20260212163000.1195586-1-Frank.Li@nxp.com Signed-off-by: Marc Kleine-Budde

dt-bindings: can: renesas,rcar-canfd: Document RZ/T2H and RZ/N2H SoCs

2026-01-16T19:51:18Z

Document the CAN-FD controller used on the RZ/T2H and RZ/N2H SoCs. The CAN-FD IP is largely compatible with the R-Car Gen4 block, but differs in that AFLPN and CFTML are different, there is no reset line for the IP, and it only supports two channels. Sync the resets and reset-names schema handling with other CAN-FD SoCs so DT validation stays consistent and maintainable. Signed-off-by: Lad Prabhakar Reviewed-by: Geert Uytterhoeven Reviewed-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20260114154525.3169992-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Marc Kleine-Budde

dt-bindings: can: renesas,rcar-canfd: Document RZ/V2H(P) and RZ/V2N SoCs

2026-01-16T19:51:18Z

Document CANFD IP found on the Renesas RZ/V2H(P) (R9A09G057) and RZ/V2N (R9A09G056) SoCs. The CANFD IP on these SoCs are identical to that found on the RZ/G3E (R9A09G047) SoC. Signed-off-by: Lad Prabhakar Acked-by: Krzysztof Kozlowski Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260114154525.3169992-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Marc Kleine-Budde

dt-bindings: can: renesas,rcar-canfd: Specify reset-names

2026-01-16T19:51:18Z

Specify the expected reset-names for the Renesas CAN-FD controller on RZ/G2L and RZ/G3E SoCs. The reset names rstp_n and rstc_n are defined in the SoC hardware manual and are already used by the driver since commit 76e9353a80e9 ("can: rcar_canfd: Add support for RZ/G2L family"). The reset-names property existed previously but was dropped by commit 466c8ef7b66b ("dt-bindings: can: renesas,rcar-canfd: Simplify the conditional schema"). Restore and constrain reset-names in the binding so DT schema checks match the actual hardware requirements and driver expectations. Signed-off-by: Lad Prabhakar Reviewed-by: Krzysztof Kozlowski Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260114154525.3169992-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Marc Kleine-Budde

dt-bindings: can: renesas,rcar-canfd: Document renesas,fd-only property

2026-01-16T19:50:10Z

The CANFD on RZ/{G2L,G3E} and R-Car Gen4 support 3 modes FD-Only mode, Classical CAN mode and CAN-FD mode. In FD-Only mode, communication in Classical CAN frame format is disabled. Document renesas,fd-only to handle this mode. As these SoCs support 3 modes, update the description of renesas,no-can-fd property and disallow it for R-Car Gen3. Signed-off-by: Biju Das Reviewed-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20251126155911.320563-2-biju.das.jz@bp.renesas.com Signed-off-by: Marc Kleine-Budde

dt-bindings: can: mpfs: document resets

2025-11-26T10:30:37Z

The CAN cores on Polarfire SoC both have a reset. The platform firmware brings both cores out of reset, but the linux driver must use them during normal operation. The resets should have been made required, but this is one of the things that can happen when the binding is written without driver support. Fixes: c878d518d7b6 ("dt-bindings: can: mpfs: document the mpfs CAN controller") Signed-off-by: Conor Dooley Reviewed-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20251121-sample-footsore-743d81772efc@spud Signed-off-by: Marc Kleine-Budde

dt-bindings: can: mcp251xfd: add gpio-controller property

2025-11-12T18:30:33Z

The mcp251xfd has two pins that can be used as gpio. Add gpio-controller property to binding description. Acked-by: Krzysztof Kozlowski Signed-off-by: Gregor Herburger Signed-off-by: Viken Dadhaniya Reviewed-by: Manivannan Sadhasivam Link: https://patch.msgid.link/20251001091006.4003841-7-viken.dadhaniya@oss.qualcomm.com Signed-off-by: Marc Kleine-Budde

dt-bindings: can: m_can: Add wakeup properties

2025-10-17T09:02:27Z

The pins associated with m_can have to have a special configuration to be able to wakeup the SoC from some system states. This configuration is described in the wakeup pinctrl state while the default state describes the default configuration. Also add the sleep state which is already in use by some devicetrees. Also m_can can be a wakeup-source if capable of wakeup. Signed-off-by: Markus Schneider-Pargmann (TI.com) Reviewed-by: Dhruva Gole Reviewed-by: Rob Herring (Arm) Link: https://patch.msgid.link/20251001-topic-mcan-wakeup-source-v6-12-v10-1-4ab508ac5d1e@baylibre.com Signed-off-by: Marc Kleine-Budde

dt-binding: can: m_can: add optional resets property

2025-09-15T15:51:30Z

The m_can IP core has an external reset line. Add it to the bindings documentation. Signed-off-by: Marc Kleine-Budde Acked-by: Conor Dooley Link: https://lore.kernel.org/r/20250807-stm32mp15-m_can-add-reset-v2-1-f69ebbfced1f@pengutronix.de Signed-off-by: Alexandre Torgue

Merge tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2025-05-29T15:22:07Z

Pull devicetree updates from Rob Herring: "DT Bindings: - Convert all remaining interrupt-controller bindings to DT schema - Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC PMC, imx-drm, and ftm-quaddec to DT schema - Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te, maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard - Add top-level constraints for renesas,vsp1 and renesas,fcp - Add missing constraint in amlogic,pinctrl-a4 'group' nodes - Adjust the allowed properties for dwc3-xilinx, sony,imx219, pci-iommu, and renesas,dsi - Add EcoNet vendor prefix - Fix the reserved-memory.yaml in fsl,qman-fqd - Drop obsolete numa.txt and cpu-topology.txt which are schemas in dtschema now - Drop Renesas RZ/N1S bindings - Ensure Arm cpu nodes don't allow undocumented properties. Add all the properties which are in use and undocumented. Drop the Mediatek cpufreq binding which is not a binding, but just what DT properties the driver uses. - Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU - Update documentation on defining child nodes with separate schemas - Add bindings to PSCI MAINTAINERS entry DT core: - Add new functions to simplify driver handling of 'memory-region' properties. Users to be added next cycle. - Simplify of_dma_set_restricted_buffer() to use of_for_each_phandle() - Add missing unlock on error in unittest_data_add()" * tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits) dt-bindings: timer: Add fsl,vf610-pit.yaml dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card dt-bindings: arm/cpus: Allow 2 power-domains entries dt-bindings: usb: dwc3-xilinx: allow dma-coherent media: dt-bindings: sony,imx219: Allow props from video-interface-devices dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller dt-bindings: trivial-devices: Add VZ89TE to trivial media: dt-bindings: renesas,vsp1: add top-level constraints media: dt-bindings: renesas,fcp: add top-level constraints dt-bindings: trivial-devices: Add Maxim max30208 dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema ...