kernel.git/Documentation/devicetree/bindings/net/bluetooth, branch linux-6.15.y

dt-bindings: net: bluetooth: nxp: Add support to set BD address

2025-03-25T16:45:37Z

Allow user to set custom BD address for NXP chipsets. Signed-off-by: Neeraj Sanjay Kale Reviewed-by: Krzysztof Kozlowski Signed-off-by: Luiz Augusto von Dentz

dt-bindings: net: bluetooth: qualcomm: document WCN3950

2025-03-25T16:42:05Z

WCN3950 is another member of the WiFi/BT WCN39xx family of the chips. It requires different firmware, so document it as a new compat string. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Dmitry Baryshkov Signed-off-by: Luiz Augusto von Dentz

dt-bindings: net: bluetooth: nxp: Add wakeup pin properties

2025-03-25T16:41:51Z

NXP bluetooth controller may have GPIO pins used and routed for `WAKE_IN` and `WAKE_OUT`, such pin info must be known so that the driver is can configure the controller's firmware accordingly. Signed-off-by: Loic Poulain Reviewed-by: Rob Herring (Arm) Signed-off-by: Luiz Augusto von Dentz

dt-bindings: bluetooth: Utilize PMU abstraction for WCN6750

2025-01-15T15:35:11Z

We are now using the on-chip PMU node for power sequencing to manage the enable/disable functionality of Bluetooth. Consequently, the inputs previously marked as required under the Bluetooth node can be removed. For instance, the enable GPIO is now managed by the PMU node with the property bt-enable-gpios. Signed-off-by: Janaki Ramaiah Thota Reviewed-by: Krzysztof Kozlowski Signed-off-by: Luiz Augusto von Dentz

dt-bindings: net: bluetooth: qca: Expand firmware-name property

2025-01-15T15:33:43Z

Expand the firmware-name property to specify the names of NVM and rampatch firmware to load. This update will support loading specific firmware (nvm and rampatch) for certain chips, like the QCA6698 Bluetooth chip, which shares the same IP core as the WCN6855 but has different RF components and RAM sizes, requiring new firmware files. We might use different connectivity boards on the same platform. For example, QCA6698-based boards can support either a two-antenna or three-antenna solution, both of which work on the sa8775p-ride platform. Due to differences in connectivity boards and variations in RF performance from different foundries, different NVM configurations are used based on the board ID. So In firmware-name, if the NVM file has an extension, the NVM file will be used. Otherwise, the system will first try the .bNN (board ID) file, and if that fails, it will fall back to the .bin file. Possible configurations: firmware-name = "QCA6698/hpnv21.bin", "QCA6698/hpbtfw21.tlv"; firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv"; firmware-name = "QCA6698/hpnv21.bin"; Acked-by: Krzysztof Kozlowski Signed-off-by: Cheng Jiang Signed-off-by: Luiz Augusto von Dentz

dt-bindings: net: bluetooth: nxp: Add support for power save feature using GPIO

2024-11-14T20:29:20Z

This adds a new optional device tree property device-wakeup-gpios, which specifies the GPIO connected to BT_WAKE_IN pin of the NXP chipset. If this property is defined, the driver will use this GPIO for driving chip into sleep/wakeup state, else use the UART break signal by default. Signed-off-by: Neeraj Sanjay Kale Reviewed-by: Rob Herring (Arm) Signed-off-by: Luiz Augusto von Dentz

Merge tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2024-09-19T06:38:51Z

Pull devicetree updates from Rob Herring: "DT Bindings: - Drop duplicate devices in trivial-devices.yaml - Add a common serial peripheral device schema and reference it in serial device schemas. - Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt, snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis, fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522, aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer, ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema - Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p, fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc, isil,isl69260, ti,tps546d24, and lpc32xx DMA mux - Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and mediatek,mt6795-sys-clock.yaml - Add arm,gic ESPI and EPPI interrupt type specifiers - Add another batch of legacy compatible strings which we have no intention of documenting - Add dmas/dma-names properties to FSL lcdif - Fix wakeup-source reference to m8921-keypad.yaml - Treewide fixes of typos in bindings DT Core: - Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429 - More conversions to scoped iterators and __free() initializer - Handle overflows in address resources on 32-bit systems - Extend extracting compatible strings in sources from function parameters - Use of_property_present() in DT unittest - Clean-up of_irq_to_resource() to use helpers - Support #msi-cells=<0> in of_msi_get_domain() - Improve the kerneldoc for of_property_match_string() - kselftest: Ignore nodes that have ancestors disabled" * tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits) dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml of/irq: Use helper to define resources of/irq: Make use of irq_get_trigger_type() dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required drivers/of: Improve documentation for match_string of: property: Do some clean up with use of __free() dt-bindings: watchdog: qcom-wdt: document support on SA8255p dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers dt-bindings: dma: Add lpc32xx DMA mux binding dt-bindings: trivial-devices: Drop duplicate "maxim,max1237" dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices dt-bindings: trivial-devices: Deprecate "ad,ad7414" dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles dt-bindings: wakeup-source: update reference to m8921-keypad.yaml dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p dt-bindings: Fix various typos of: address: Unify resource bounds overflow checking ...

dt-bindings: Fix various typos

2024-09-13T19:01:34Z

Corrected several typos in Documentation/devicetree/bindings files. Reviewed-by: Krzysztof Kozlowski Reviewed-by: Kuan-Wei Chiu Reviewed-by: Matti Vaittinen Signed-off-by: Yu-Chun Lin Link: https://lore.kernel.org/r/20240905151943.2792056-1-eleanor15x@gmail.com Signed-off-by: Rob Herring (Arm)

dt-bindings: bluetooth: bring the HW description closer to reality for wcn6855

2024-09-10T17:04:31Z

Describe the inputs from the PMU that the Bluetooth module on wcn6855 consumes and drop the ones from the host. This breaks the current contract but the only two users of wcn6855 upstream - sc8280xp based boards - will be updated in DTS patches sent separately while the hci_qca driver will remain backwards compatible with older DT sources. Acked-by: Rob Herring (Arm) Signed-off-by: Bartosz Golaszewski Signed-off-by: Luiz Augusto von Dentz

dt-bindings: net: bluetooth: Add support for Amlogic Bluetooth

2024-09-10T16:43:57Z

Add binding document for Amlogic Bluetooth chipsets attached over UART. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Yang Li Signed-off-by: Luiz Augusto von Dentz