kernel.git/Documentation/devicetree/bindings/mtd, branch linux-4.3.y

Merge tag 'for-linus-20150901' of git://git.infradead.org/linux-mtd

2015-09-02T19:16:24Z

Pull MTD updates from Brian Norris: "SPI NOR: - reduce virtual address space requirements for fsl-quadspi memory map - new fsl-quadspi IP support: imx6ul-qspi and imx7d-qspi - add new NOR flash device support - add new driver for NXP SPI Flash Interface (SPIFI) - stop abusing SPI API structs for non-SPI framework - fixup DT table matching for new "jedec,spi-nor" string NAND: - brcmnand: fix big endian MIPS macro usage - denali: refactor to use devres, dev_*() printing, etc. - OMAP ELM: change the module alias to actually be usable - pxa3xx_nand: fixup a few command sequencing issues -- both new and old - race conditions in the IRQ handler status clearing - problems when a bootloader left interrupts pending - config issues when overriding the bootloader configuration - new flash device support - sunxi_nand: - optimize timing configuration by calculation, rather than fixed fail-safe values - use EDO setting from ONFI - r852: fix compiler warnings - davinci: add 4KB page support Core: - oobtest: correct debug print information" * tag 'for-linus-20150901' of git://git.infradead.org/linux-mtd: (42 commits) mtd: mtd_oobtest: Fix the address offset with vary_offset case mtd: blkdevs: fix switch-bool compilation warning mtd: spi-nor: stop (ab)using struct spi_device_id mtd: nand: add Toshiba TC58NVG0S3E to nand_ids table mtd: dataflash: Export OF module alias information nand: pxa3xx: Increase READ_ID buffer and make the size static mtd: nand: pxa3xx-nand: fix random command timeouts mtd: nand: pxa3xx_nand: fix early spurious interrupt mtd: pxa3xx_nand: add a default chunk size mtd: omap_elm: Fix module alias mtd: physmap_of: fix null pointer deference when kzalloc returns null mtd: nettel: do not ignore mtd_device_register() failure in nettel_init() mtd: denali_pci: switch to dev_err() mtd: denali_pci: refactor driver using devres API mtd: denali_pci: use module_pci_driver() macro mtd: denali: hide core part from user in Kconfig mtd: spi-nor: add Spansion S25FL204K support mtd: spi-nor: Improve Kconfig help text for SPI_FSL_QUADSPI mtd: spi-nor: add driver for NXP SPI Flash Interface (SPIFI) doc: dt: add documentation for nxp,lpc1773-spifi ...

mtd: nand: pxa3xx: add optional dma for pxa architecture

2015-09-01T13:18:12Z

The PXA architecture provides a DMA to pump data from the nand controller to memory and the other way around. Add it to the binding description. Signed-off-by: Robert Jarzmik Signed-off-by: Rob Herring

doc: dt: add documentation for nxp,lpc1773-spifi

2015-08-14T18:22:54Z

Add device tree binding documentation for the SPI Flash Interface (SPIFI) found on NXP LPC18xx and LPC43xx devies. Signed-off-by: Joachim Eastwood Signed-off-by: Brian Norris

Documentation: fsl-quadspi: Add fsl, imx6ul-qspi compatible string

2015-08-06T17:07:42Z

new compatible string: "fsl,imx6ul-qspi". Signed-off-by: Frank Li Signed-off-by: Brian Norris

Documentation: fsl-quadspi: Add fsl, imx7d-qspi compatible string

2015-08-06T17:07:40Z

new compatible string: "fsl,imx7d-qspi" Signed-off-by: Frank Li Signed-off-by: Brian Norris

Merge tag 'v4.1-rc4' into MTD's -next

2015-05-18T17:50:43Z

Documentation: devicetree: brcmstb_nand: add BCM63138 and Cygnus/iProc

2015-05-15T20:19:59Z

Add notes to describe how some SoCs integrate this NAND core a little differently, and so we define extra compatibility strings and register resources/names. Signed-off-by: Brian Norris Reviewed-by: Florian Fainelli

Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"

2015-05-15T20:04:00Z

In commit 8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec" binding"), we added a generic "nor-jedec" binding to catch all mostly-compatible SPI NOR flash which can be detected via the READ ID opcode (0x9F). This was discussed and reviewed at the time, however objections have come up since then as part of this discussion: http://lkml.kernel.org/g/20150511224646.GJ32500@ld-irv-0074 It seems the parties involved agree that "jedec,spi-nor" does a better job of capturing the fact that this is SPI-specific, not just any NOR flash. This binding was only merged for v4.1-rc1, so it's still OK to change the naming. At the same time, let's move the documentation to a better name. Next up: stop referring to code (drivers/mtd/devices/m25p80.c) from the documentation. Signed-off-by: Brian Norris Cc: Marek Vasut Cc: Rafał Miłecki Cc: Rob Herring Cc: Pawel Moll Cc: Ian Campbell Cc: Kumar Gala Cc: devicetree@vger.kernel.org Acked-by: Stephen Warren Acked-by: Geert Uytterhoeven Acked-by: Mark Rutland

Documentation: devicetree: add binding doc for Broadcom NAND controller

2015-05-13T00:22:07Z

Signed-off-by: Brian Norris Reviewed-by: Florian Fainelli

Documentation: devicetree: m25p80: add "nor-jedec" binding

2015-04-06T01:56:21Z

Almost all flash that are "compatible" with m25p80 support the JEDEC READ ID opcode (0x9F), and in fact, that is often the only thing that is used to differentiate them. Let's add a compatible string that represents this lowest common denominator of compatibility. Device trees can still specify manufacturer/device names in addition, but (until some reason is found to differentiate between them through device tree) software will likely want to bind just against the generic name, and avoid unnecessarily growing its device ID binding tables. This is related to the work of commit a5b7616c55e1 ("mtd: m25p80,spi-nor: Fix module aliases for m25p80"), which showed that maintaining these device tables as stable device-tree/modalias binding tables is not a worthwhile burden for mostly-comptatible flash. At the same time, let's update the binding doc to point to the m25p_ids[] ID list instead of spi_nor_ids[]. The former can be used for device tree bindings, but the latter cannot. In the future, we should pare down the m25p_ids[] list to only those IDs which are actually used in device trees. Signed-off-by: Brian Norris Cc: Rafał Miłecki Reviewed-by: Marek Vasut