kernel.git/Documentation/devicetree/bindings/mmc, branch linux-4.19.y

dt-bindings: mmc: Add disable-cqe-dcmd property.

2019-09-16T06:22:12Z

[ Upstream commit 28f22fb755ecf9f933f045bc0afdb8140641b01c ] Add disable-cqe-dcmd as optional property for MMC hosts. This property allows to disable or not enable the direct command features of the command queue engine. Signed-off-by: Christoph Muellner Signed-off-by: Philipp Tomsich Fixes: 84362d79f436 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

dt-bindings: mmc: Add supports-cqe property

2019-09-16T06:22:11Z

[ Upstream commit c7fddbd5db5cffd10ed4d18efa20e36803d1899f ] Add supports-cqe optional property for MMC hosts. This property is used to identify the specific host controller supporting command queue. Signed-off-by: Sowjanya Komatineni Reviewed-by: Thierry Reding Reviewed-by: Rob Herring Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2018-08-23T21:02:22Z

Pull ARM device-tree updates from Olof Johansson: "Business as usual -- the bulk of our changes are to devicetree files with new hardware support, new SoCs and platforms, and new board types. New SoCs/platforms: - Raspberry Pi Compute Module (CM1) and IO board - i.MX6SSL from NXP - Renesas RZ/N1D SoC (R9A06G032), Dual Cortex-A7 with Ethernet, CAN and PLC interfaces - TI AM654 SoC, Quad Cortex-A53, safety subsystem with Cortex-R5 controllers, communication and PRU subsystem and lots of other interfaces (PCIe, USB3, etc). New boards and systems: - Several Atmel at91-based boards from Laird - Marvell Armada388-based Helios4 board from SolidRun - Samsung Aires-based phones (s5pv210) - Allwinner A64-based Pinebook laptop In addition to the above, there's the usual amount of new devices described on existing platforms, fixes and tweaks and new minor variants of boards/platforms" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (478 commits) arm64: dts: sdm845: Add tsens nodes arm64: dts: msm8996: thermal: Initialise via DT and add second controller arm64: dts: sprd: Add one suspend timer arm64: dts: sprd: Add SC27XX ADC device arm64: dts: sprd: Add SC27XX eFuse device arm64: dts: sprd: Add SC27XX vibrator device arm64: dts: sprd: Add SC27XX breathing light controller device arm64: dts: meson-axg: add spdif-dit codec arm64: dts: meson-axg: add lineout codec arm64: dts: meson-axg: add linein codec arm64: dts: meson-axg: add tdm interfaces arm64: dts: meson-axg: add tdmout formatters arm64: dts: meson-axg: add tdmin formatters arm64: dts: meson-axg: add spdifout arm64: dts: rockchip: add led support for Firefly-RK3399 arm64: dts: rockchip: remove deprecated Type-C PHY properties on rk3399 arm64: dts: rockchip: add power button support for Firefly-RK3399 ARM: dts: aspeed: Add coprocessor interrupt controller arm64: dts: meson-axg: add audio arb reset controller arm64: dts: meson-axg: add usb power regulator ...

Merge tag 'mmc-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2018-08-18T22:54:05Z

Pull MMC updates from Ulf Hansson: "Updates for MMC for v4.19. MMC core: - Add some fine-grained hooks to further support HS400 tuning - Improve error path for bus width setting for HS400es - Use a common method when checking R1 status MMC host: - renesas_sdhi: Add r8a77990 support - renesas_sdhi: Add eMMC HS400 mode support - tmio/renesas_sdhi: Improve tuning/clock management - tmio: Add eMMC HS400 mode support - sunxi: Add support for 3.3V eMMC DDR mode - mmci: Initial support to manage variant specific callbacks - sdhci: Don't try 3.3V I/O voltage if not supported - sdhci-pci-dwc-mshc: Add driver to support Synopsys dwc mshc SDHCI PCI - sdhci-of-dwcmshc: Add driver to support Synopsys DWC MSHC SDHCI - sdhci-msm: Add support for new version sdcc V5 - sdhci-pci-o2micro: Add support for O2 eMMC HS200 mode - sdhci-pci-o2micro: Add support for O2 hardware tuning - sdhci-pci-o2micro: Add MSI interrupt support for O2 SD host - sdhci-pci: Add support for Intel ICP - sdhci-tegra: Prevent ACMD23 and HS200 mode on Tegra 3 - sdhci-tegra: Fix eMMC DDR52 mode - sdhci-tegra: Improve clock management - dw_mmc-rockchip: Document compatible string for px30 - sdhci-esdhc-imx: Add support for 3.3V eMMC DDR mode - sdhci-of-esdhc: Set proper DMA mask for ls104x chips - sdhci-of-esdhc: Improve clock management - sdhci-of-arasan: Add a quirk to manage unstable clocks - dw_mmc-exynos: Address potential external abort during system resume - pxamci: Add support for common MMC DT bindings - pxamci: Several cleanups and improvements - pxamci: Merge immutable branch for pxa to switch to DMA slave maps" * tag 'mmc-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (56 commits) mmc: core: improve reasonableness of bus width setting for HS400es mmc: tmio: remove unneeded variable in tmio_mmc_start_command() mmc: renesas_sdhi: Fix sampling clock position selecting mmc: tmio: Fix tuning flow mmc: sunxi: remove output of virtual base address dt-bindings: mmc: rockchip-dw-mshc: add description for px30 mmc: renesas_sdhi: Add r8a77990 support mmc: sunxi: allow 3.3V DDR when DDR is available mmc: mmci: Add and implement a ->dma_setup() callback for qcom dml mmc: mmci: Initial support to manage variant specific callbacks mmc: tegra: Force correct divider calculation on DDR50/52 mmc: sdhci: Add MSI interrupt support for O2 SD host mmc: sdhci: Add support for O2 hardware tuning mmc: sdhci: Export sdhci tuning function symbol mmc: sdhci: Change O2 Host HS200 mode clock frequency to 200MHz mmc: sdhci: Add support for O2 eMMC HS200 mode mmc: tegra: Add and use tegra_sdhci_get_max_clock() mmc: sdhci-esdhc-imx: fix indent mmc: sdhci-esdhc-imx: disable clocks before changing frequency mmc: tegra: prevent ACMD23 on Tegra 3 ...

dt-bindings: mmc: rockchip-dw-mshc: add description for px30

2018-08-01T10:02:03Z

Add "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc" for dwmmc on px30 platform. Acked-by: Rob Herring Signed-off-by: Liang Chen Signed-off-by: Ulf Hansson

mmc: renesas_sdhi: Add r8a77990 support

2018-08-01T10:02:03Z

This patch adds SDHI support for the R8A77990 SoC (R-Car E3). No driver changes needed for anything except HS400 which we will enable separately later. Signed-off-by: Wolfram Sang Reviewed-by: Niklas Söderlund Reviewed-by: Geert Uytterhoeven Signed-off-by: Ulf Hansson

dt-bindings: remove 'interrupt-parent' from bindings

2018-07-25T20:09:39Z

'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring

dt-binding: mmc: sunxi: add H6 compatible (with A64 fallback)

2018-07-19T14:50:26Z

The MMC controllers on H6 is similar to the ones on A64, but with some new features. Add compatible strings for them (with the A64 compatible strings as fallback, in order to make them to work with A64 drivers). Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard

dt: bindings: Add bindings for SDHCI Synopsys DWC MSHC

2018-07-16T09:21:45Z

Synopsys SDHCI compatible DesignWare Cores Mobile Storage Host Controller can support eMMC/SD/SDIO. Add the bindings. Signed-off-by: Jisheng Zhang Signed-off-by: Ulf Hansson

mmc: pxamci: remove pxa-mmc, gpio-power from devicetree bindings

2018-07-16T09:21:45Z

Devicetree-enabled boards should use proper regulators to control the power of cards, not GPIOs, so let's remove this property. The regulator properties are supported by the MMC core and are described in the generic MMC document: Documentation/devicetree/bindings/mmc/mmc.txt Note that devicetree support for PXA platforms hasn't fully landed yet, so this binding does not have any users at this point. Signed-off-by: Daniel Mack Acked-by: Robert Jarzmik Signed-off-by: Ulf Hansson