kernel.git/Documentation/devicetree/bindings/mfd, branch linux-6.10.y

Merge tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2024-05-22T17:41:14Z

Pull MFD updates from Lee Jones: "New Device Support: - Add support for X-Powers AXP717 PMIC to AXP22X - Add support for Rockchip RK816 PMIC to RK8XX - Add support for TI TPS65224 PMIC to TPS6594 New Functionality: - Add Power Off functionality to Rohm BD71828 - Allow I2C SMBus access in Renesas RSMU Fix-ups: - Device Tree binding adaptions/conversions/creation - Shift Intel support over to MSI interrupts - Generify adding platform data away from being ACPI specific - Use device core supplied attribute to register sysfs entries - Replace hand-rolled functionality with generic APIs - Utilise centrally provided helpers and macros - Clean-up error handling - Remove superfluous/duplicated/unused sections - Trivial; spelling, whitespace, coding-style adaptions - More Maple Tree conversions" * tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits) dt-bindings: mfd: Use full path to other schemas mfd: rsmu: support I2C SMBus access dt-bindings: mfd: Convert lp873x.txt to json-schema dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node dt-bindings: mfd: allwinner,sun6i-a31-prcm: Use hyphens in node names mfd: ssbi: Remove unused field 'slave' from 'struct ssbi' mfd: kempld: Remove custom DMI matching code mfd: cs42l43: Update patching revision check dt-bindings: mfd: qcom: pm8xxx: Add pm8901 compatible mfd: timberdale: Remove redundant assignment to variable err dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible dt-bindings: mfd: qcom,tcsr: Add compatible for SDX75 mfd: axp20x: Convert to use Maple Tree register cache mfd: bd71828: Remove commented code lines mfd: intel-m10-bmc: Change staging size to a variable dt-bindings: mfd: Add ROHM BD71879 mfd: Tidy Kconfig dependency's parentheses mfd: ocelot-spi: Use spi_sync_transfer() dt-bindings: mfd: syscon: Add missing simple syscon compatibles ...

Merge tag 'regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

2024-05-14T21:36:09Z

Pull regulator updates from Mark Brown: "There's one API update here, a new API factoring out a common pattern for reference voltage supplies. These are supplies used as a reference by analogue circuits where the consumer requests and enables the supply, reads the voltage to calibrate the user and then never touches it again. This is factored out into a single operation which just returns the voltage and uses devm_ to manage the request and enable portion. Otherwise this has been a very quiet release, we've got some new device support, some small fixes, housekeeping and cleanup work but nothing substantial. There's also some non-regulator changes in here, a number of users for the new reference voltage API were merged along with it and some MFD changes were pulled in as dependencies for new driver work. Highlights: - Add a new API for single operation handling of reference voltages - Support for Allwinner AXP717 and D1, and NXP PCA9561A" * tag 'regulator-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (33 commits) regulator: sun20i: Add Allwinner D1 LDOs driver regulator: dt-bindings: Add Allwinner D1 system LDOs regulator: Mention regulator id in error message about dummy supplies staging: iio: impedance-analyzer: ad5933: Use devm_regulator_get_enable_read_voltage() iio: frequency: admv1013: Use devm_regulator_get_enable_read_voltage() iio: addac: ad74115: Use devm_regulator_get_enable_read_voltage() hwmon: (adc128d818) simplify final return in probe regulator: devres: fix devm_regulator_get_enable_read_voltage() return hwmon: (da9052) Use devm_regulator_get_enable_read_voltage() hwmon: (adc128d818) Use devm_regulator_get_enable_read_voltage() regulator: devres: add API for reference voltage supplies regulator: rtq2208: Fix LDO discharge register and add vsel setting regulator: dt-bindings: fixed-regulator: Add a preferred node name regulator: axp20x: add support for the AXP717 mfd: axp20x: Add support for AXP717 PMIC dt-bindings: mfd: x-powers,axp152: Document AXP717 regulator: axp20x: fix typo-ed identifier dt-bindings: regulator: qcom,usb-vbus-regulator: Add PM7250B compatible regulator: pca9450: add pca9451a support regulator: dt-bindings: pca9450: add pca9451a support ...

dt-bindings: mfd: Use full path to other schemas

2024-05-10T14:39:18Z

When referencing other schema, it is preferred to use an absolute path (/schemas/....), which allows also an seamless move of particular schema out of Linux kernel to dtschema. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Tudor Ambarus Reviewed-by: Matti Vaittinen Link: https://lore.kernel.org/r/20240503072116.12430-1-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones

dt-bindings: mfd: Convert lp873x.txt to json-schema

2024-05-10T14:39:18Z

Convert the lp873x binding to DT schema format. The gpio-controller and #gpio-cells properties were removed from required because using the device as a GPIO controller is optional. Signed-off-by: Nathan Morrisson Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240429195830.4027250-1-nmorrisson@phytec.com Signed-off-by: Lee Jones

dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node

2024-05-10T14:39:17Z

The use of 'oneOf' to include 1 of 3 possible child node schemas results in error messages containing the actual error message(s) for the correct SoC buried in the tons of error messages from the 2 schemas that don't apply. It also causes the pinctrl schema to be applied twice as it will be applied when the compatible matches. All that's really needed in the parent schema is to ensure one of the possible compatible strings is present in the pinctrl node so that its schema will be applied separately. Signed-off-by: Rob Herring (Arm) Reviewed-by: Andrew Jeffery Link: https://lore.kernel.org/r/20240430172520.535179-1-robh@kernel.org Signed-off-by: Lee Jones

dt-bindings: mfd: allwinner,sun6i-a31-prcm: Use hyphens in node names

2024-05-10T14:39:17Z

Underscores should not be used in node names (dtc with W=2 warns about them), so replace them with hyphens. This should have no impact on known users: Linux MFD driver does not care about children node names. DTS was already adjusted in commit 0f47ef3ff1bd ("arm: dts: allwinner: drop underscore in node names"), so without this change, we observe dtbs_check warnings: sun6i-a31s-colorfly-e708-q1.dtb: prcm@1f01400: 'ahb0-clk', 'apb0-clk', 'apb0-gates-clk', 'apb0-rst', 'ar100-clk', 'ir-clk' do not match any of the regexes: '^.*_(clk|rst)$', 'pinctrl-[0-9]+' Reported-by: Rob Herring Closes: https://lore.kernel.org/all/CAL_JsqJfT-jui5P56CO4Fr37kr5iNN8dpxt8ecKeFmdVGnRYbA@mail.gmail.com/ Signed-off-by: Krzysztof Kozlowski Reviewed-by: Jernej Skrabec Acked-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20240424045521.31857-1-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones

dt-bindings: mfd: qcom: pm8xxx: Add pm8901 compatible

2024-05-10T14:39:17Z

Add missing compatible for the pm8901 model used in msm8660 such as (HP TouchPad (tenderloin). Signed-off-by: Herman van Hazendonk Acked-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20240415123038.1526386-1-github.com@herrie.org Signed-off-by: Lee Jones

dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types

2024-05-10T14:39:17Z

Add the PBS (Programmable Boot Sequencer) to the list of devices. Reviewed-by: Bjorn Andersson Signed-off-by: Luca Weiss Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240412-pmi632-ppg-v2-1-8ac892b1bb61@fairphone.com Signed-off-by: Lee Jones

dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible

2024-05-10T14:39:17Z

The CTRLMMR_MAC_IDx registers within the CTRL_MMR space of TI's AM62p SoC contain the MAC Address programmed in the eFuse. Add compatible for allowing the CPSW driver to obtain a regmap for the CTRLMMR_MAC_IDx registers within the System Controller device-tree node. The default MAC Address for the interface corresponding to the first MAC port will be set to the value programmed in the eFuse. Signed-off-by: Siddharth Vadapalli Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240402105708.4114146-1-s-vadapalli@ti.com Signed-off-by: Lee Jones

dt-bindings: mfd: qcom,tcsr: Add compatible for SDX75

2024-05-10T14:39:17Z

Document the qcom,sdx75-tcsr compatible. Signed-off-by: Rohit Agarwal Acked-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20240426055326.3141727-3-quic_rohiagar@quicinc.com Signed-off-by: Lee Jones