kernel.git/Documentation/devicetree/bindings/leds, branch linux-4.0.y

DT: leds: Add led-sources property

2015-01-29T22:53:07Z

Add a property for defining device outputs the LED represented by the DT child node is connected to. Signed-off-by: Jacek Anaszewski Acked-by: Kyungmin Park Cc: Bryan Wu Cc: Richard Purdie Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: devicetree@vger.kernel.org Acked-by: Pavel Machek Acked-by: Rob Herring Signed-off-by: Bryan Wu

DT: leds: Add flash LED devices related properties

2015-01-14T18:40:19Z

Addition of a LED Flash class extension entails the need for flash LED specific device tree properties. The properties being added are: max-microamp, flash-max-microamp, flash-timeout-microsec. (cooloney@gmail.com: remove white spaces) Signed-off-by: Pavel Machek Acked-by: Sakari Ailus Acked-by: Jacek Anaszewski Acked-by: Rob Herring Signed-off-by: Bryan Wu

leds: lp8860: Introduce TI lp8860 4 channel LED driver

2014-11-19T18:33:06Z

Introduce the Texas Instruments lp8860 4 channel LED driver. This driver configures the device in display cluster mode as this seems to be the most used configuration at the time of the driver configuration. For more product information please see the link below: http://www.ti.com/product/lp8860-q1 Signed-off-by: Dan Murphy Signed-off-by: Bryan Wu

leds: add device tree bindings for register bit LEDs

2014-09-25T22:27:19Z

This adds the device tree bindings used by register bit LEDs. Cc: devicetree@vger.kernel.org Cc: Bryan Wu Cc: Richard Purdie Signed-off-by: Linus Walleij

Documentation: dts: tcs6507: Fix wrong statement about #gpio-cells

2014-07-22T23:26:43Z

Update comment about gpio-cells which says not correctly to be set to 0. When we want to reference tca6507 gpio #gpio-cells must be set to 2 (it is already correct in example). Signed-off-by: Marek Belisko Signed-off-by: Bryan Wu

leds:pca963x: Update for PCA9635 and correct statement about MODE2 OUTDRV default

2014-07-03T18:57:34Z

mention support for 16 LED PCA9635 chip the default of MODE2's OUTDRV was incorrectly stated Signed-off-by: Peter Meerwald Signed-off-by: Bryan Wu

leds: lp55xx: add DT bindings for LP55231

2014-05-08T06:28:08Z

The TI55231 appears to be fully compatible to the 5523 model from National Semicondutor. This patch just adds DT bindings for it. Signed-off-by: Daniel Mack Acked-by: Milo Kim Signed-off-by: Bryan Wu

leds: leds-pwm: add DT support for LEDs wired to supply

2014-05-08T06:28:07Z

The non-DT driver allowed an active low property to be specified, but DT is missing this in its description. Add the property to the DT binding document, making it optional. It defaults to active high, which retains compatibility with existing descriptions. This should only be used for causes where the LED is wired to supply, and the PWM does not sensibly support its own inversion. Signed-off-by: Russell King Signed-off-by: Bryan Wu

leds: leds-gpio: add retain-state-suspended property

2014-02-27T17:56:56Z

Some gpio-leds need retain the state even in suspend, such as charger led. But this property missed in devicetree, add it. (cooloney@gmail.com: fold DT binding updates into this patch) Signed-off-by: Robin Gong Signed-off-by: Bryan Wu

LEDS: tca6507: add device-tree support for GPIO configuration.

2014-01-28T01:28:46Z

The 7 lines driven by the TCA6507 can either drive LEDs or act as output-only GPIOs. To make this distinction in devicetree we use the "compatible" property. If the device attached to a line is "compatible" with "gpio", we treat it like a GPIO. If it is "compatible" with "led" (or if no "compatible" value is set) we treat it like an LED. (cooloney@gmail.com: fix typo in the subject) Signed-off-by: NeilBrown Signed-off-by: Bryan Wu