kernel.git/Documentation/devicetree/bindings/hwmon, branch linux-4.19.y

dt-binding: hwmon: Add NPCM7xx PWM and Fan controller documentation

2018-07-09T03:08:13Z

Added device tree binding documentation for Nuvoton BMC NPCM7xx Pulse Width Modulation (PWM) and Fan tach controller. The Nuvoton BMC NPCM7XX supports 8 PWM controller outputs and 16 Fan tachometer controller inputs. Signed-off-by: Tomer Maimon Reviewed-by: Rob Herring [groeck: Fixed whitespace errors noticed by git] Signed-off-by: Guenter Roeck

hwmon: (gpio-fan) Fix "#cooling-cells" property name in bindings

2018-05-29T20:56:39Z

It should be "#cooling-cells" instead of "cooling-cells". Fix it. Signed-off-by: Viresh Kumar [groeck: Updated subject] Signed-off-by: Guenter Roeck

hwmon: (ltc2990) add devicetree binding

2018-05-21T14:52:00Z

Add a devicetree binding for the ltc2990 hwmon driver. Signed-off-by: Tom Levens Acked-by: Rob Herring Signed-off-by: Guenter Roeck

dt-bindings: hwmon: aspeed-pwm-tacho: Add reset node

2018-01-02T23:05:34Z

The device tree bindings are updated to document the resets phandle, and the example is updated to match what is expected for both the reset and clock phandle. Note that the bindings should have always had the reset controller, as the hardware is unusable without it. Acked-by: Rob Herring Signed-off-by: Joel Stanley Signed-off-by: Guenter Roeck

hwmon: (jc42) optionally try to disable the SMBUS timeout

2017-11-30T21:12:44Z

With a nxp,se97 chip on an atmel sama5d31 board, the I2C adapter driver is not always capable of avoiding the 25-35 ms timeout as specified by the SMBUS protocol. This may cause silent corruption of the last bit of any transfer, e.g. a one is read instead of a zero if the sensor chip times out. This also affects the eeprom half of the nxp-se97 chip, where this silent corruption was originally noticed. Other I2C adapters probably suffer similar issues, e.g. bit-banging comes to mind as risky... The SMBUS register in the nxp chip is not a standard Jedec register, but it is not special to the nxp chips either, at least the atmel chips have the same mechanism. Therefore, do not special case this on the manufacturer, it is opt-in via the device property anyway. Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Peter Rosin Acked-by: Rob Herring Signed-off-by: Guenter Roeck

dt-bindings: pmbus: Add Maxim MAX31785 documentation

2017-11-07T01:26:42Z

Signed-off-by: Andrew Jeffery Acked-by: Rob Herring Signed-off-by: Guenter Roeck

hwmon: (gpio-fan) Move DT bindings to the right place

2017-10-30T01:36:03Z

This moves the GPIO fan bindings to the hwmon bindings. The GPIO fan is a hwmon class hardware, not related to GPIO other than being a consumer of GPIOs. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij Acked-by: Rob Herring Signed-off-by: Guenter Roeck

dt-bindings: hwmon: add compatible for max1619

2017-10-30T01:36:03Z

Add new device tree bindings document for max1619 device including a new compatible string. Signed-off-by: Alan Tull Cc: Jean Delvare Cc: Guenter Roeck Cc: Rob Herring Cc: Mark Rutland Acked-by: Rob Herring Signed-off-by: Guenter Roeck

hwmon: (ltq-cputemp) add devicetree bindings documentation

2017-09-01T14:24:12Z

Document the devicetree bindings for the ltq-cputemp Signed-off-by: Florian Eckert Signed-off-by: Guenter Roeck

dt-bindings: hwmon: Document the IBM CCF power supply version 1

2017-08-30T01:01:25Z

Signed-off-by: Edward A. James Acked-by: Rob Herring Signed-off-by: Guenter Roeck