kernel.git/Documentation/devicetree/bindings/gpio, branch linux-3.12.y

Merge tag 'gpio-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2013-09-07T17:53:00Z

Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v3.12 series: - A new driver for the TZ1090 PDC which is used on the metag architecture. - A new driver for the Kontron ETX or COMexpress GPIO block. This is found on some ETX x86 devices. - A new driver for the Fintek Super-I/O chips, used on some x86 boards. - Added device tree probing on a few select GPIO blocks. - Drop the Exynos support from the Samsung GPIO driver. The Samsung maintainers have moved over to use the modernized pin control driver to provide GPIO for the modern platforms instead. - The usual bunch of non-critical fixes and cleanups" * tag 'gpio-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (36 commits) gpio: return -ENOTSUPP if debounce cannot be set gpio: improve error path in gpiolib gpio: add GPIO support for F71882FG and F71889F of: add vendor prefix for Microchip Technology Inc gpio: mcp23s08: rename the device tree property gpio: samsung: Drop support for Exynos SoCs gpio: pcf857x: Remove pdata argument to pcf857x_irq_domain_init() gpio: pcf857x: Sort headers alphabetically gpio: max7301: Reverting "Do not force SPI speed when using OF Platform" gpio: Fix bit masking in Kontron PLD GPIO driver gpio: pca953x: fix gpio input on gpio offsets >= 8 drivers/gpio: simplify use of devm_ioremap_resource drivers/gpio/gpio-omap.c: convert comma to semicolon gpio-lynxpoint: Fix warning about unbalanced pm_runtime_enable gpio: Fix platform driver name in Kontron PLD GPIO driver gpio: adnp: Fix segfault if request_threaded_irq fails gpio: msm: Staticize local variable 'msm_gpio' gpio: gpiolib-of.c: make error message more meaningful by adding the node name and index gpio: use dev_get_platdata() gpio/mxc: add chained_irq_enter/exit() to mx2_gpio_irq_handler ...

gpio: mcp23s08: rename the device tree property

2013-08-30T07:25:52Z

The device tree property should be more descriptive. microchip seems more reasonable than mcp. The old mcp prefix is still supported but marked as deprecated. Users of mcp have to switch to the microchip prefix. Acked-by: Mark Rutland Signed-off-by: Lars Poeschel Signed-off-by: Linus Walleij

gpio: clean up gpio-ranges documentation

2013-08-15T20:12:46Z

This change makes documentation of the the gpio-ranges property shorter and more succinct, more consistent with the style of the rest of the document, and not mention Linux-specifics such as the API pinctrl_request_gpio(); DT binding documents should be OS independant where at all possible. As part of this, the gpio-ranges property's format is described in BNF form, in order to match the rest of the document. This change also deprecates the #gpio-range-cells property. Such properties are useful when one node references a second node, and that second node dictates the format of the reference. However, that is not the case here; the definition of gpio-ranges itself always dictates its format entirely, and hence the value #gpio-range-cells must always be 3, and hence there is no point requiring any referenced node to include this property. The only remaining need for this property is to ensure compatibility of DTs with older SW that was written to support the previous version of the binding. v4: * Mention #gpio-range-cells as being deprecated, rather than removing all documentation of that property. This allows DTs to be written in a backwards-compatible way if desired, and also allows older DTs to be interpreted fully using the latest documentation. v3: * Mention BNF in commit description. * Fixed typo. * Dropped patch that removed the deprecated property from *.dts, since it's required to boot older kernels. Signed-off-by: Stephen Warren Acked-by: Mark Rutland Signed-off-by: Linus Walleij

gpio: palmas: add dt support

2013-07-29T16:14:33Z

Add of_device_id table for Palma GPIO to be enable the driver from DT file. The driver can be registered from DT file as: palmas: tps65913@58 { ::::::::::: palmas_gpio: palmas_gpio { compatible = "ti,palmas-gpio"; gpio-controller; #gpio-cells = <2>; }; }; Signed-off-by: Laxman Dewangan Acked-by: Stephen Warren Signed-off-by: Linus Walleij

gpio: pxa: fix Documentation of interrupt-names property

2013-07-21T16:15:46Z

The property name to pass names for interrupt resources is called "interrupt-names", not "interrupt-name". Fix it to avoid further confusion. Signed-off-by: Daniel Mack Cc: Haojian Zhuang Cc: Linus Walleij Cc: Arnd Bergmann Signed-off-by: Linus Walleij

gpio-rcar: Add interrupt controller support to the DT bindings

2013-07-20T20:28:12Z

Update the DT bindings documentation with the interrupt-controller and #interrupt-cells properties. Signed-off-by: Laurent Pinchart Signed-off-by: Linus Walleij

gpio-tz1090-pdc: add TZ1090 PDC gpio driver

2013-07-20T17:03:48Z

Add a GPIO driver for the low-power Powerdown Controller GPIOs in the TZ1090 SoC. The driver is instantiated by device tree and supports interrupts for the SysWake GPIOs only. Changes in v4: - fix typos in DT bindings compatible properties - reference Documentation/devicetree/bindings/gpio/gpio.txt in gpio-ranges description in DT bindings - fix gpio-ranges examples in DT bindings (it must now have 3 cells) Changes in v3: - separated from irq-imgpdc and removed arch/metag changes to allow these patches to go upstream separately via the pinctrl[/gpio] trees (particularly the pinctrl drivers depend on the new pinconf DT bindings). - some s/unsigned/unsigned int/. - gpio-tz1090*: refer to and flags in bindings. - gpio-tz1090*: move initcall from postcore to subsys. Changes in v2: - gpio-tz1090-pdc: remove references to Linux flags in dt bindings - gpio-tz1090-pdc: make use of BIT() from linux/bitops.h - gpio-tz1090-pdc: make register accessors inline to match pinctrl - gpio-tz1090-pdc: update gpio-ranges to use 3 cells after recent ABI breakage Signed-off-by: James Hogan Cc: Grant Likely Cc: Rob Herring Cc: Rob Landley Cc: Linus Walleij Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Linus Walleij

gpio-tz1090: add TZ1090 gpio driver

2013-07-20T17:00:44Z

Add a GPIO driver for the main GPIOs found in the TZ1090 (Comet) SoC. This doesn't include low-power GPIOs as they're controlled separately via the Powerdown Controller (PDC) registers. The driver is instantiated by device tree and supports interrupts for all GPIOs. Changes in v4: - fix typos in DT bindings compatible properties - reference Documentation/devicetree/bindings/gpio/gpio.txt in gpio-ranges description in DT bindings - fix gpio-ranges examples in DT bindings (it must now have 3 cells) - gpio-tz1090: use of_property_read_u32 instead of of_get_property Changes in v3: - separated from irq-imgpdc and removed arch/metag changes to allow these patches to go upstream separately via the pinctrl[/gpio] trees (particularly the pinctrl drivers depend on the new pinconf DT bindings). - some s/unsigned/unsigned int/. - some s/unsigned int/bool/ and use of BIT(). - gpio-tz1090*: refer to and flags in bindings. - gpio-tz1090*: move initcall from postcore to subsys. - gpio-tz1090: add REG_ prefix to some constants for consistency. - gpio-tz1090: add comment to explain tz1090_gpio_irq_next_edge cunningness. Changes in v2: - gpio-tz1090: remove references to Linux flags in dt bindings - gpio-tz1090: make use of BIT() from linux/bitops.h - gpio-tz1090: make register accessors inline to match pinctrl - gpio-tz1090: update gpio-ranges to use 3 cells after recent ABI breakage Signed-off-by: James Hogan Cc: Grant Likely Cc: Rob Herring Cc: Rob Landley Cc: Linus Walleij Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Linus Walleij

watchdog: New watchdog driver for MEN A21 watchdogs

2013-07-11T20:19:05Z

This patch adds the driver for the watchdog devices found on MEN Mikro Elektronik A21 VMEbus CPU Carrier Boards. It has DT-support and uses the watchdog framework. Signed-off-by: Johannes Thumshirn Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

Merge tag 'gpio-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2013-07-03T18:39:44Z

Pull GPIO updates from Linus Walleij: "Here is a batch of GPIO changes for v3.11. I have agreed with Grant to take care of the pull requests for this development cycle. No special things are happening in the GPIO tree this time (nice with some calm) and I have been extra careful to do regression builds and it's well boiled in -next. GPIO changes for the v3.11 development cycle: - Incremental development for the Langwell (Atom SoC), Xilinx, ICH and RCAR drivers. - Cleanups from Jingoo Han, Axel Lin, Wei Jongjun, Wolfram Sang, Tushar Behera, Sachin Kamat and Yijing Wang" * tag 'gpio-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (35 commits) Gpio/trivial: replace numeric with standard PM state macros gpiolib: remove warnning of allocations with IRQs disabled gpio: grgpio: Staticize local symbols gpio-langwell: remove Withney point support gpio: ich: add GPO_BLINK support gpio-sta2x11: Convert to use devm_ioremap_resource gpio_msm: Convert to use devm_ioremap_resource gpio-rcar: Use OUTDT when reading GPIOs configured as output gpio-sta2x11: Fix potential NULL pointer dereference gpio/omap: omap_gpio_init_context stub must be inline gpio: msm-v1: Remove errant __devinit to fix compile gpio: devres: make comments proper GPIO: xilinx: Enable driver for Xilinx zynq DT: Add documentation for gpio-xilinx GPIO: xilinx: Use BIT macro GPIO: xilinx: Use __raw_readl/__raw_writel IO functions GPIO: xilinx: Add support for dual channel GPIO: xilinx: Simplify driver probe function gpio: sx150x: convert to use devm_* functions MAINTAINERS: add linux-gpio mailing list ...