kernel.git/Documentation/devicetree/bindings/dma, branch linux-5.8.y

Merge tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2020-06-10T18:03:04Z

Pull dmaengine updates from Vinod Koul: "A fairly small dmaengine update which includes mostly driver updates (dmatest, dw-edma, ioat, mmp-tdma and k3-udma) along with Renesas binding update to json-schema" * tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (39 commits) dmaengine: imx-sdma: initialize all script addresses dmaengine: ti: k3-udma: Use proper return code in alloc_chan_resources dmaengine: ti: k3-udma: Remove udma_chan.in_ring_cnt dmaengine: ti: k3-udma: Add missing dma_sync call for rx flush descriptor dmaengine: at_xdmac: Replace zero-length array with flexible-array dmaengine: at_hdmac: Replace zero-length array with flexible-array dmaengine: qcom: bam_dma: Replace zero-length array with flexible-array dmaengine: ti: k3-udma: Use PTR_ERR_OR_ZERO() to simplify code dmaengine: moxart-dma: Drop pointless static qualifier in moxart_probe() dmaengine: sf-pdma: Simplify the error handling path in 'sf_pdma_probe()' dmaengine: qcom_hidma: use true,false for bool variable dmaengine: dw-edma: support local dma device transfer semantics dmaengine: Fix doc strings to satisfy validation script dmaengine: Include dmaengine.h into dmaengine.c dmaengine: dmatest: Describe members of struct dmatest_info dmaengine: dmatest: Describe members of struct dmatest_params dmaengine: dmatest: Allow negative timeout value to specify infinite wait Revert "dmaengine: dmatest: timeout value of -1 should specify infinite wait" dmaengine: stm32-dma: direct mode support through device tree dt-bindings: dma: add direct mode support through device tree in stm32-dma ...

Merge tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2020-06-05T03:11:25Z

Pull devicetree updates from Rob Herring: - Convert various DT (non-binding) doc files to ReST - Various improvements to device link code - Fix __of_attach_node_sysfs refcounting bug - Add support for 'memory-region-names' with reserved-memory binding - Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics, Shanghai Awinic Technology Co., MikroTik, Silex Insight - A bunch more binding conversions to DT schema. Only 3K to go. - Add a minimum version check for schema tools - Treewide dropping of 'allOf' usage with schema references. Not needed in new json-schema spec. - Some formatting clean-ups of schemas * tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (194 commits) dt-bindings: clock: Add documentation for X1830 bindings. dt-bindings: mailbox: Convert imx mu to json-schema dt-bindings: power: Convert imx gpcv2 to json-schema dt-bindings: power: Convert imx gpc to json-schema dt-bindings: Merge gpio-usb-b-connector with usb-connector dt-bindings: timer: renesas: cmt: Convert to json-schema dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema dt-bindings: timer: Convert i.MX GPT to json-schema dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742 dt-bindings: serial: Add binding for UART pin swap dt-bindings: geni-se: Add interconnect binding for GENI QUP dt-bindings: geni-se: Convert QUP geni-se bindings to YAML dt-bindings: vendor-prefixes: Add Silex Insight vendor prefix dt-bindings: input: touchscreen: edt-ft5x06: change reg property dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver dt-bindings: timer: renesas: mtu2: Convert to json-schema of/fdt: Remove redundant kbasename function call dt-bindings: clock: Convert i.MX1 clock to json-schema dt-bindings: clock: Convert i.MX21 clock to json-schema dt-bindings: clock: Convert i.MX25 clock to json-schema ...

dt-bindings: dma: uart: mtk: fix example

2020-05-28T23:40:02Z

The binding example is missing the fallback compatible. This is needed as the driver only matches against mt6577. Signed-off-by: Matthias Brugger Signed-off-by: Rob Herring

dt-bindings: Fix incorrect 'reg' property sizes

2020-05-14T19:43:27Z

The examples template is a 'simple-bus' with a size of 1 cell for had between 2 and 4 cells which really only errors on I2C or SPI type devices with a single cell. The easiest fix in most cases is to change the 'reg' property to for 1 cell address and size. In some cases with child devices having 2 cells, that doesn't make sense so a bus node is needed. Acked-by: Stephen Boyd # clk Reviewed-by: Geert Uytterhoeven Acked-by: Geert Uytterhoeven Signed-off-by: Rob Herring

Merge tag 'imx-fixes-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

2020-05-13T22:00:07Z

i.MX fixes for 5.7: - Set correct AHB clock for i.MX8MN SDMA1 device to fix a "Timeout waiting for CH0" error. - Fix a linker error for i.MX6 configurations that have ARM_CPU_SUSPEND=n, which can happen if neither CONFIG_PM, CONFIG_CPU_IDLE, nor ARM_PSCI_FW are selected. - Fix I2C1 pinctrl configuration for i.MX27 phytec-phycard board. - Fix i.MX8M AIPS 'reg' properties to remove DTC simple_bus_reg warnings. - Add missing compatible "fsl,vf610-edma" for LS1028A EDMA device, so that bootloader can fix up the IOMMU entries there. Otherwise, EDMA just doesn't work on LS1028A with shipped bootloader. - Fix imx6dl-yapp4-ursa board Ethernet connection. - Fix input_val for AUDIOMIX_BIT_STREAM pinctrl defines on i.MX8MP according to Reference Manual. * tag 'imx-fixes-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: freescale: imx8mp: update input_val for AUDIOMIX_BIT_STREAM arm64: dts: imx8m: Fix AIPS reg properties arm64: dts: imx8mn: Change SDMA1 ahb clock for imx8mn ARM: dts: imx27-phytec-phycard-s-rdk: Fix the I2C1 pinctrl entries ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=y ARM: dts: imx6dl-yapp4: Fix Ursa board Ethernet connection arm64: dts: ls1028a: add "fsl,vf610-edma" compatible dt-bindings: dma: fsl-edma: fix ls1028a-edma compatible Link: https://lore.kernel.org/r/20200429063226.GT32592@dragon Signed-off-by: Arnd Bergmann

dt-bindings: Remove cases of 'allOf' containing a '$ref'

2020-05-03T16:10:41Z

json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works. This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax. Scripted with ruamel.yaml with some manual fixups. Some minor whitespace changes from the script. Signed-off-by: Rob Herring Acked-by: Maxime Ripard Acked-by: Lee Jones Acked-By: Vinod Koul Acked-by: Mark Brown Acked-by: Alexandre Belloni Acked-by: Wolfram Sang # for I2C Reviewed-by: Linus Walleij Acked-by: Jonathan Cameron #for-iio Reviewed-by: Stephen Boyd # clock Signed-off-by: Rob Herring

Merge tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma

2020-05-02T18:16:14Z

Pull dmaengine fixes from Vinod Koul: "Core: - Documentation typo fixes - fix the channel indexes - dmatest: fixes for process hang and iterations Drivers: - hisilicon: build error fix without PCI_MSI - ti-k3: deadlock fix - uniphier-xdmac: fix for reg region - pch: fix data race - tegra: fix clock state" * tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dmatest: Fix process hang when reading 'wait' parameter dmaengine: dmatest: Fix iteration non-stop logic dmaengine: tegra-apb: Ensure that clock is enabled during of DMA synchronization dmaengine: fix channel index enumeration dmaengine: mmp_tdma: Reset channel error on release dmaengine: mmp_tdma: Do not ignore slave config validation errors dmaengine: pch_dma.c: Avoid data race between probe and irq handler dt-bindings: dma: uniphier-xdmac: switch to single reg region include/linux/dmaengine: Typos fixes in API documentation dmaengine: xilinx_dma: Add missing check for empty list dmaengine: ti: k3-psil: fix deadlock on error path dmaengine: hisilicon: Fix build error without PCI_MSI

dt-bindings: dma: add direct mode support through device tree in stm32-dma

2020-04-27T16:10:12Z

Direct mode or FIFO mode is computed by stm32-dma driver. Add a way for the user to force direct mode, by setting bit 2 in the bitfield value specifying DMA features in the device tree. Signed-off-by: Amelie Delaunay Link: https://lore.kernel.org/r/20200422102904.1448-2-amelie.delaunay@st.com Signed-off-by: Vinod Koul

dt-bindings: dma: Convert jz4740-dma doc to YAML

2020-04-20T22:22:22Z

Convert the textual documentation for the Ingenic SoCs DMA Controller devicetree binding to YAML. Signed-off-by: Paul Cercueil Signed-off-by: Rob Herring

Merge branch 'dt/linus' into dt/next

2020-04-17T19:37:05Z