kernel.git/Documentation/devicetree/bindings/display/bridge, branch linux-5.12.y

Merge tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drm

2021-02-21T22:44:44Z

Pull drm updates from Dave Airlie: "A pretty normal tree, lots of refactoring across the board, ttm, i915, nouveau, and bunch of features in various drivers. docs: - lots of updated docs core: - require crtc to have unique primary plane - fourcc macro fix - PCI bar quirk for bar resizing - don't sent hotplug on error - move vm code to legacy - nuke hose only used on old oboslete alpha dma-buf: - kernel doc updates - improved lock tracking dp/hdmi: - DP-HDMI2.1 protocol converter support ttm: - bo size handling cleanup - release a pinned bo warning - cleanup lru handler - avoid using pages with drm_prime_sg_to_page_addr_arrays cma-helper: - prime/mmap fixes bridge: - add DP support gma500: - remove gma3600 support i915: - try eDP fast/narrow link again with fallback - Intel eDP backlight control - replace display register read/write macros - refactor intel_display.c - display power improvements - HPD code cleanup - Rocketlake display fixes - Power/backlight/RPM fixes - DG1 display fix - IVB/BYT clear residuals security fix again - make i915 mitigations options via parameter - HSW GT1 GPU hangs fixes - DG1 workaround hang fixes - TGL DMAR hang avoidance - Lots of GT fixes - follow on fixes for residuals clear - gen7 per-engine-reset support - HDCP2.2 + HDCP1.4 GEN12 DP MST support - TGL clear color support - backlight refactoring - VRR/Adaptive sync enabling on DP/EDP for TGL+ - async flips for all ilk+ amdgpu: - rework IH ring handling (Vega/Navi) - rework HDP handling (Vega/Navi) - swSMU updates for renoir/vangogh - Sienna Cichild overdrive support - FP16 on DCE8-11 support - GPU reset on navy flounder/vangogh - SMU profile fixes for APU - SR-IOV fixes - Vangogh SMU fixes - fan speed control fixes amdkfd: - config handling fix - buffer free fix - recursive lock warnings fix nouveau: - Turing MMU fault recovery fixes - mDP connectors reporting fix - audio locking fixes - rework engines/instances code to support new scheme tegra: - VIC newer firmware support - display/gr2d fixes for older tegra - pm reference leak fix mediatek: - SOC MT8183 support - decouple sub driver + share mtk mutex driver radeon: - PCI resource fix for some platforms ingenic: - pm support - 8-bit delta RGB panels vmwgfx: - managed driver helpers vc4: - BCM2711 DSI1 support - converted to atomic helpers - enable 10/12 bpc outputs - gem prime mmap helpers - CEC fix omap: - use degamma table - CTM support - rework DSI support imx: - stack usage fixes - drm managed support - imx-tve clock provider leak fix - rcar-du: - default mode fixes - conversion to managed API hisilicon: - use simple encoder vkms: - writeback connector support d3: - BT2020 support" * tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drm: (1459 commits) drm/amdgpu: Set reference clock to 100Mhz on Renoir (v2) drm/radeon: OLAND boards don't have VCE drm/amdkfd: Fix recursive lock warnings drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth() drm/amd/display: Fix potential integer overflow drm/amdgpu/display: remove hdcp_srm sysfs on device removal drm/amdgpu: fix CGTS_TCC_DISABLE register offset on gfx10.3 drm/i915/gt: Correct surface base address for renderclear drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling drm/nouveau/top/ga100: initial support drm/nouveau/top: add ioctrl/nvjpg drm/nouveau/privring: rename from ibus drm/nouveau/nvkm: remove nvkm_subdev.index drm/nouveau/nvkm: determine subdev id/order from layout drm/nouveau/vic: switch to instanced constructor drm/nouveau/sw: switch to instanced constructor drm/nouveau/sec2: switch to instanced constructor drm/nouveau/sec: switch to instanced constructor drm/nouveau/pm: switch to instanced constructor drm/nouveau/nvenc: switch to instanced constructor ...

ASoC: audio-graph-card: update audio-graph-card.yaml reference

2021-01-25T19:34:32Z

Changeset 97198614f6c3 ("ASoC: audio-graph-card: switch to yaml base Documentation") renamed: Documentation/devicetree/bindings/sound/audio-graph-card.txt to: Documentation/devicetree/bindings/sound/audio-graph-card.yaml. Update its cross-reference accordingly. Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/8a779e6b9644d19c5d77b382059f6ccf9781434d.1610535350.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring

dt-bindings: display: Use OF graph schema

2021-01-12T00:03:59Z

Now that we have a graph schema, rework the display related schemas to use it. Mostly this is adding a reference to graph.yaml and dropping duplicate parts from schemas. In panel-common.yaml, 'ports' is dropped. Any binding using 'ports' should be one with more than 1 port node, and the binding must define what each port is. Note that ti,sn65dsi86.yaml, ti,tfp410,yaml and toshiba,tc358768.yaml will need further updates to use video-interfaces.yaml once that lands. Cc: Thierry Reding Cc: Sam Ravnborg Cc: Laurent Pinchart Cc: Maxime Ripard Cc: Maarten Lankhorst Cc: Thomas Zimmermann Signed-off-by: Rob Herring Reviewed-by: Laurent Pinchart Link: https://patchwork.freedesktop.org/patch/msgid/20210104180724.2275098-1-robh@kernel.org

Merge tag 'du-next-20210105' of git://linuxtv.org/pinchartl/media into drm-next

2021-01-07T12:02:57Z

- Add default modes for connectors in unknown state - R-Car DU conversion to DRM-managed API - R-Car DU miscellaneous fixes - Miscellaneous bridge and bridge bindings fixes - Assorted misc driver cleanups - Constify drm_driver for PCI devices Signed-off-by: Daniel Vetter From: Laurent Pinchart Link: https://patchwork.freedesktop.org/patch/msgid/X/P8IOrVXkTpLeCm@pendragon.ideasonboard.com

dt-bindings: display: bridge: renesas,lvds: RZ/G2E needs renesas,companion too

2021-01-05T05:20:37Z

Document RZ/G2E support for property renesas,companion. Signed-off-by: Fabrizio Castro Reviewed-by: Laurent Pinchart Reviewed-by: Jacopo Mondi Reviewed-by: Rob Herring Signed-off-by: Laurent Pinchart

dt-bindings: display: bridge: thc63lvd1024: Document dual-output mode

2021-01-05T05:19:47Z

The DT binding support both dual-input and dual-output mode, but only dual-input is documented. Document dual-output mode. Suggested-by: Jacopo Mondi Signed-off-by: Laurent Pinchart Acked-by: Jacopo Mondi Reviewed-by: Rob Herring Reviewed-by: Kieran Bingham

dt-bindings: Drop unnecessary *-supply schemas properties

2020-12-23T01:58:02Z

*-supply properties are always a single phandle, so binding schemas don't need a type $ref nor 'maxItems'. A meta-schema check for this is pending once these existing cases are fixed. Cc: Jonathan Cameron Cc: Dmitry Torokhov Cc: Mauro Carvalho Chehab Cc: Maxime Ripard Cc: dri-devel@lists.freedesktop.org Cc: linux-iio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-media@vger.kernel.org Acked-by: Sam Ravnborg Reviewed-by: Laurent Pinchart Acked-by: Sakari Ailus Acked-by: Lee Jones Acked-by: Mark Brown Link: https://lore.kernel.org/r/20201221234659.824881-1-robh@kernel.org Signed-off-by: Rob Herring

dt-bindings: display: eliminate yamllint warnings

2020-12-18T21:15:20Z

Eliminate the following yamllint warnings: ./Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml :52:9: [warning] wrong indentation: expected 6 but found 8 (indentation) ./Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml :42:8: [warning] wrong indentation: expected 8 but found 7 (indentation) :45:8: [warning] wrong indentation: expected 8 but found 7 (indentation) ./Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml :21:6: [warning] wrong indentation: expected 6 but found 5 (indentation) ./Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml :25:10: [warning] wrong indentation: expected 10 but found 9 (indentation) Signed-off-by: Zhen Lei Acked-by: Sam Ravnborg Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20201207044830.1551-2-thunder.leizhen@huawei.com Signed-off-by: Rob Herring

dt-bindings: display: sii902x: Add supply bindings

2020-11-08T10:52:48Z

The sii902x chip family requires IO and core voltages to reach the correct voltage before chip initialization. Add binding for describing the two supplies. Signed-off-by: Alexandru Gagniuc Acked-by: Rob Herring Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20201020221501.260025-3-mr.nuke.me@gmail.com

dt-bindings: display: bridge: Add documentation for LT9611UXC

2020-11-07T11:01:40Z

Lontium LT9611UXC is a DSI to HDMI bridge which supports 2 DSI ports and I2S port as input and one HDMI port as output. The LT9611UXC chip is handled by a separate driver, but the bindings used are fully compatible with the LT9611 chip, so let's reuse the lt9611.yaml schema. Signed-off-by: Dmitry Baryshkov Acked-by: Vinod Koul Acked-by: Sam Ravnborg Acked-by: Rob Herring Reviewed-by: Bjorn Andersson Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20201102011435.1100930-2-dmitry.baryshkov@linaro.org