kernel.git/Documentation/devicetree/bindings/display/bridge, branch linux-4.9.y

drm: bridge: add DT bindings for TI ths8135

2017-10-08T08:26:02Z

[ Upstream commit 2e644be30fcc08c736f66b60f4898d274d4873ab ] THS8135 is a configurable video DAC. Add DT bindings for this chip. Signed-off-by: Bartosz Golaszewski Reviewed-by: Laurent Pinchart Acked-by: Rob Herring Signed-off-by: Archit Taneja Link: http://patchwork.freedesktop.org/patch/msgid/1481623759-12786-3-git-send-email-bgolaszewski@baylibre.com Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

drm/bridge: Add RGB to VGA bridge support

2016-10-10T05:28:44Z

Some boards have an entirely passive RGB to VGA bridge, based on DACs implemented by resistor ladders. Those might or might not have an i2c bus routed to the VGA connector in order to access the screen EDIDs. Add a bridge that doesn't do anything but expose the modes available on the screen, either based on the EDIDs if available, or based on the XGA standards. Acked-by: Rob Herring Reviewed-by: Sean Paul Tested-by: Laurent Pinchart Signed-off-by: Maxime Ripard Signed-off-by: Archit Taneja Link: http://patchwork.freedesktop.org/patch/msgid/20160930143709.1388-3-maxime.ripard@free-electrons.com

Merge branch 'drm-tda998x-devel' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-next

2016-09-13T00:28:17Z

This adds the ASoC codec interfaces for TDA998x HDMI audio from Jyri Sarha. * 'drm-tda998x-devel' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: dts: am335x-boneblack: Add HDMI audio support drm/i2c: tda998x: Register ASoC hdmi-codec and add audio DT binding drm/i2c: tda998x: Improve tda998x_configure_audio() audio related pdata

drm/i2c: tda998x: Register ASoC hdmi-codec and add audio DT binding

2016-09-07T12:10:10Z

Register ASoC HDMI codec for audio functionality and adds device tree binding for audio configuration. With the registered HDMI codec the tda998x node can be used like a regular codec node in ASoC card configurations. HDMI audio info-frame and audio stream header is generated by the ASoC HDMI codec. The codec also applies constraints for available sample-rates based on Edid Like Data from the display. The device tree binding document has been updated [1]. Part of this patch has been inspired by Jean Francoise's "drm/i2c: tda998x: Add support of a DT graph of ports"-patch [2]. There may still be some identical lines left from the original patch and some of the ideas have come from there. [1] Documentation/devicetree/bindings/display/bridge/tda998x.txt [2] http://mailman.alsa-project.org/pipermail/alsa-devel/2015-July/095255.html Signed-off-by: Jyri Sarha Signed-off-by: Russell King

Merge branch 'drm_bridge_for_4.8' of https://github.com/boddob/linux into drm-next

2016-07-19T07:51:19Z

This is an update to the previous drm bridge pull request. The ADV7511 driver's conversion from slave encoder to bridge meant that its users (the rcar-du kms driver) should use the bridge interface too. This pull request now also contains a commit that updates the rcar-du's hdmi encoder interface from slave encoder to bridge. The other updates are as before: - Converts the ADV7511 i2c slave encoder driver to a bridge driver. Adds support for the ADV7533 bridge chip. - Add bridge driver for TC358767 (DSI/DPI to eDP) encoder chips. * 'drm_bridge_for_4.8' of https://github.com/boddob/linux: drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder drm/bridge: tc358767: Add DPI to eDP bridge driver dt-bindings: tc358767: add DT documentation dt-bindings: drm/bridge: Update bindings for ADV7533 drm/bridge: adv7533: Change number of DSI lanes dynamically drm/bridge: adv7533: Use internal timing generator drm/bridge: adv7533: Create a MIPI DSI device drm/bridge: adv7533: Initial support for ADV7533 drm/bridge: adv7511: Fix mutex deadlock when interrupts are disabled drm/i2c: adv7511: Move to bridge folder drm/i2c: adv7511: Convert to drm_bridge

dt-bindings: tc358767: add DT documentation

2016-07-17T08:30:41Z

Add DT binding documentation for the Toshiba TC358767 eDP bridge. Acked-by: Rob Herring Signed-off-by: Philipp Zabel Signed-off-by: Archit Taneja

dt-bindings: drm/bridge: Update bindings for ADV7533

2016-07-13T08:54:38Z

Add description of ADV7533. Add the required and optional properties that are specific to it. Cc: devicetree@vger.kernel.org Acked-by: Rob Herring Signed-off-by: Archit Taneja

drm/rockchip: analogix_dp: add rk3399 eDP support

2016-07-05T13:53:31Z

RK3399 and RK3288 shared the same eDP IP controller, only some light difference with VOP configure and GRF configure. Signed-off-by: Yakir Yang Acked-by: Mark Yao Reviewed-by: Tomasz Figa Reviewed-by: Sean Paul

drm/bridge: Add sii902x DT bindings doc

2016-06-20T13:57:06Z

Add Sii9022 DT bindings description. Signed-off-by: Boris Brezillon Acked-by: Rob Herring --- Changes since v6: - make 'reset-gpios' optional Changes since v1: - rename doc file - s/sil902/sii902/

drm: bridge: analogix/dp: try force hpd after plug in lookup failed

2016-04-05T02:13:07Z

Some edp screen do not have hpd signal, so we can't just return failed when hpd plug in detect failed. This is an hardware property, so we need add a devicetree property "analogix,need-force-hpd" to indicate this sutiation. Acked-by: Rob Herring Tested-by: Caesar Wang Tested-by: Douglas Anderson Tested-by: Heiko Stuebner Tested-by: Javier Martinez Canillas Signed-off-by: Yakir Yang