kernel.git/Documentation/devicetree/bindings/display/bridge, branch linux-4.8.y

Merge branch 'drm_bridge_for_4.8' of https://github.com/boddob/linux into drm-next

2016-07-19T07:51:19Z

This is an update to the previous drm bridge pull request. The ADV7511 driver's conversion from slave encoder to bridge meant that its users (the rcar-du kms driver) should use the bridge interface too. This pull request now also contains a commit that updates the rcar-du's hdmi encoder interface from slave encoder to bridge. The other updates are as before: - Converts the ADV7511 i2c slave encoder driver to a bridge driver. Adds support for the ADV7533 bridge chip. - Add bridge driver for TC358767 (DSI/DPI to eDP) encoder chips. * 'drm_bridge_for_4.8' of https://github.com/boddob/linux: drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder drm/bridge: tc358767: Add DPI to eDP bridge driver dt-bindings: tc358767: add DT documentation dt-bindings: drm/bridge: Update bindings for ADV7533 drm/bridge: adv7533: Change number of DSI lanes dynamically drm/bridge: adv7533: Use internal timing generator drm/bridge: adv7533: Create a MIPI DSI device drm/bridge: adv7533: Initial support for ADV7533 drm/bridge: adv7511: Fix mutex deadlock when interrupts are disabled drm/i2c: adv7511: Move to bridge folder drm/i2c: adv7511: Convert to drm_bridge

dt-bindings: tc358767: add DT documentation

2016-07-17T08:30:41Z

Add DT binding documentation for the Toshiba TC358767 eDP bridge. Acked-by: Rob Herring Signed-off-by: Philipp Zabel Signed-off-by: Archit Taneja

dt-bindings: drm/bridge: Update bindings for ADV7533

2016-07-13T08:54:38Z

Add description of ADV7533. Add the required and optional properties that are specific to it. Cc: devicetree@vger.kernel.org Acked-by: Rob Herring Signed-off-by: Archit Taneja

drm/rockchip: analogix_dp: add rk3399 eDP support

2016-07-05T13:53:31Z

RK3399 and RK3288 shared the same eDP IP controller, only some light difference with VOP configure and GRF configure. Signed-off-by: Yakir Yang Acked-by: Mark Yao Reviewed-by: Tomasz Figa Reviewed-by: Sean Paul

drm/bridge: Add sii902x DT bindings doc

2016-06-20T13:57:06Z

Add Sii9022 DT bindings description. Signed-off-by: Boris Brezillon Acked-by: Rob Herring --- Changes since v6: - make 'reset-gpios' optional Changes since v1: - rename doc file - s/sil902/sii902/

drm: bridge: analogix/dp: try force hpd after plug in lookup failed

2016-04-05T02:13:07Z

Some edp screen do not have hpd signal, so we can't just return failed when hpd plug in detect failed. This is an hardware property, so we need add a devicetree property "analogix,need-force-hpd" to indicate this sutiation. Acked-by: Rob Herring Tested-by: Caesar Wang Tested-by: Douglas Anderson Tested-by: Heiko Stuebner Tested-by: Javier Martinez Canillas Signed-off-by: Yakir Yang

dt-bindings: add document for analogix display port driver

2016-04-05T02:13:03Z

Analogix dp driver is split from exynos dp driver, so we just make an copy of exynos_dp.txt, and then simplify exynos_dp.txt Beside update some exynos dtsi file with the latest change according to the devicetree binding documents. Acked-by: Rob Herring Signed-off-by: Yakir Yang

dt-bindings: tda998x: Document the required 'port' node.

2015-12-09T21:30:56Z

All the users of the tda998x driver are component based and bind the driver via the device graph method described in Documentation/devicetree/bindings/graph.txt. Add the fact that the 'port' node is required to the bindings. Signed-off-by: Liviu Dudau Signed-off-by: Rob Herring

dt-bindings: consolidate display related bindings

2015-10-22T14:21:21Z

This is a quite large renaming to consolidate display related bindings into a single "display" directory from various scattered locations of video, drm, gpu, fb, mipi, and panel. The prior location was somewhat based on the Linux driver location, but bindings should be independent of that. Signed-off-by: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala