kernel.git/Documentation/devicetree/bindings/cpufreq, branch linux-6.3.y

Merge tag 'cpufreq-arm-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

2023-02-14T14:25:07Z

Pull cpufreq ARM updates for 6.3 from Viresh Kumar: "- Enable thermal cooling for Tegra194 (Yi-Wei Wang). - Register module device table and add missing compatibles for cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss). - Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu (Christian Marangi)." * tag 'cpufreq-arm-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing compatibles cpufreq: mediatek-hw: Register to module device table cpufreq: tegra194: Enable CPUFREQ thermal cooling

dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional

2023-02-14T05:21:58Z

The qcom-cpufreq-nvmem driver supports 2 kind of devices: - pre-cpr that doesn't have power-domains and base everything on nvmem cells and multiple named microvolt bindings. Doesn't need required-opp binding in the opp nodes as they are only used for genpd based devices. - cpr-based that require power-domain in the cpu nodes and use various source to decide the correct voltage and freq Require required-opp binding since they need to be linked to the related opp-level. When the schema was introduced, it was wrongly set to always require these binding but this is not the case for pre-cpr devices. Make the power-domain and the required-opp optional and set them required only for qcs404 based devices. Signed-off-by: Christian Marangi Reviewed-by: Krzysztof Kozlowski Signed-off-by: Viresh Kumar

dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables

2023-02-14T05:21:58Z

Add additional info on what opp tables the defined devices in this schema supports (operating-points-v2-kryo-cpu and operating-points-v2-qcom-level) and reference them. Signed-off-by: Christian Marangi Reviewed-by: Krzysztof Kozlowski Signed-off-by: Viresh Kumar

dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible

2023-02-06T04:01:39Z

Add compatible for EPSS CPUFREQ-HW on SM8550. Also document the interrupts. Signed-off-by: Abel Vesa Acked-by: Rob Herring Signed-off-by: Viresh Kumar

dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing compatibles

2023-02-06T04:01:39Z

Document the cpufreq-epss compatibles currently used in the tree, plus the sc7280 which will be added in a separate commit. Signed-off-by: Luca Weiss Signed-off-by: Viresh Kumar

dt-bindings: cpufreq: cpufreq-qcom-hw: document interrupts

2023-01-04T06:36:24Z

The Qualcomm Soc cpufreq hardware engine has LMh/thermal throttling interrupts (already present in SM8250 and SM8450 DTS) and Linux driver uses them: sm8250-hdk.dtb: cpufreq@18591000: 'interrupt-names', 'interrupts' do not match any of the regexes: 'pinctrl-[0-9]+' sm8450-qrd.dtb: cpufreq@17d91000: 'interrupt-names', 'interrupts' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski Signed-off-by: Viresh Kumar

dt-bindings: drop redundant part of title (end, part three)

2022-12-16T17:41:49Z

The Devicetree bindings document does not have to say in the title that it is a "binding", but instead just describe the hardware. Drop trailing "bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: $.*$ [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski Acked-by: Alexandre Belloni Acked-by: Matti Vaittinen # ROHM Acked-by: Ulf Hansson # MMC Acked-by: Stephen Boyd # clk Acked-by: Dmitry Torokhov # input Acked-by: Mark Brown Acked-by: Hans Verkuil # media Acked-by: Sebastian Reichel # power Acked-by: Viresh Kumar # cpufreq Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring

Merge tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2022-12-13T21:13:55Z

Pull devicetree updates from Rob Herring: "DT Bindings: - Various LED binding conversions and clean-ups. Convert the ir-spi-led, pwm-ir-tx, and gpio-ir-tx LED bindings to schemas. Consistently reference LED common.yaml or multi-led schemas and disallow undefined properties. - Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts, and fsl,imx-fb bindings to schema - Add ata-generic, Broadcom u-boot environment, and dynamic MTD sub-partitions bindings. - Make all SPI based displays reference spi-peripheral-props.yaml - Fix some schema property regex's which should be fixed strings or were missing start/end anchors - Remove 'status' in examples, again... DT Core: - Fix a possible NULL dereference in overlay functions - Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which never worked) - Add of_address_count() helper to count number of 'reg' entries - Support .dtso extension for DT overlay source files. Rename staging and unittest overlay files. - Update dtc to upstream v1.6.1-63-g55778a03df61" * tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (42 commits) dt-bindings: leds: Add missing references to common LED schema dt-bindings: leds: intel,lgm: Add missing 'led-gpios' property of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop() dt-bindings: lcdif: Fix constraints for imx8mp media: dt-bindings: atmel,isc: Drop unneeded unevaluatedProperties dt-bindings: Drop Jee Heng Sia dt-bindings: thermal: cooling-devices: Add missing cache related properties dt-bindings: leds: irled: ir-spi-led: convert to DT schema dt-bindings: leds: irled: pwm-ir-tx: convert to DT schema dt-bindings: leds: irled: gpio-ir-tx: convert to DT schema dt-bindings: leds: mt6360: rework to match multi-led dt-bindings: leds: lp55xx: rework to match multi-led dt-bindings: leds: lp55xx: switch to preferred 'gpios' suffix dt-bindings: leds: lp55xx: allow label dt-bindings: leds: use unevaluatedProperties for common.yaml dt-bindings: thermal: tsens: Add SM6115 compatible of/kexec: Fix reading 32-bit "linux,initrd-{start,end}" values dt-bindings: display: Convert fsl,imx-fb.txt to dt-schema dt-bindings: Add missing start and/or end of line regex anchors dt-bindings: qcom,pdc: Add missing compatibles ...

Merge tag 'pm-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2022-12-12T21:19:07Z

Pull power management updates from Rafael Wysocki: "These include two new drivers (cpufreq driver for Apple SoC CPU P-states and the SCMI Powercap based power capping driver), other new hardware support and driver extensions (Qualcomm cpufreq driver and its DT bindings, TI cpufreq driver, intel_pstate, intel-uncore-freq), a bunch of fixes and cleanups all over and a cpupower utility update including new features related to RAPL support. Specifics: - Fix nasty and hard to debug race condition introduced by mistake in the runtime PM core code and clean up that code somewhat on top of the fix (Rafael Wysocki) - Generalize of_perf_domain_get_sharing_cpumask phandle format (Hector Martin) - Add new cpufreq driver for Apple SoC CPU P-states (Hector Martin) - Update Qualcomm cpufreq driver (Manivannan Sadhasivam, Chen Hui): - CPU clock provider support - Generic cleanups or reorganization - Potential memleak fix - Fix of the return value of cpufreq_driver->get() - Update Qualcomm cpufreq driver's DT bindings (Manivannan Sadhasivam, Rob Herring, Melody Olvera): - Support for CPU clock provider - Missing cache-related properties fixes - Support for QDU1000/QRU1000 - Add support for ti,am625 SoC and enable build of ti-cpufreq for ARCH_K3 (Dave Gerlach, and Vibhore Vardhan) - Use flexible array to simplify memory allocation in the tegra186 cpufreq driver (Christophe JAILLET) - Convert cpufreq statistics code to use sysfs_emit_at() (ye xingchen) - Allow intel_pstate to use no-HWP mode on Sapphire Rapids (Giovanni Gherdovich) - Add missing pci_dev_put() to the amd_freq_sensitivity cpufreq driver (Xiongfeng Wang) - Initialize the kobj_unregister completion before calling kobject_init_and_add() in the cpufreq core code (Yongqiang Liu) - Defer setting boost MSRs in the ACPI cpufreq driver (Stuart Hayes, Nathan Chancellor) - Make intel_pstate accept initial EPP value of 0x80 (Srinivas Pandruvada) - Make read-only array sys_clk_src in the SPEAr cpufreq driver static (Colin Ian King) - Make array speeds in the longhaul cpufreq driver static (Colin Ian King) - Use str_enabled_disabled() helper in the ACPI cpufreq driver (Andy Shevchenko) - Drop a reference to CVS from cpufreq documentation (Conghui Wang) - Improve kernel messages printed by the PSCI cpuidle driver (Ulf Hansson) - Make the DT cpuidle driver return the correct number of parsed idle states, clean it up and clarify a comment in it (Ulf Hansson) - Modify the tasks freezing code to avoid using pr_cont() and refine an error message printed by it (Rafael Wysocki) - Make the hibernation core code complain about memory map mismatches during resume to help diagnostics (Xueqin Luo) - Fix mistake in a kerneldoc comment in the hibernation code (xiongxin) - Reverse the order of performance and enabling operations in the generic power domains code (Abel Vesa) - Power off[on] domains in hibernate .freeze[thaw]_noirq hook of in the generic power domains code (Abel Vesa) - Consolidate genpd_restore_noirq() and genpd_resume_noirq() (Shawn Guo) - Pass generic PM noirq hooks to genpd_finish_suspend() (Shawn Guo) - Drop generic power domain status manipulation during hibernate restore (Shawn Guo) - Fix compiler warnings with make W=1 in the idle_inject power capping driver (Srinivas Pandruvada) - Use kstrtobool() instead of strtobool() in the power capping sysfs interface (Christophe JAILLET) - Add SCMI Powercap based power capping driver (Cristian Marussi) - Add Emerald Rapids support to the intel-uncore-freq driver (Artem Bityutskiy) - Repair slips in kernel-doc comments in the generic notifier code (Lukas Bulwahn) - Fix several DT issues in the OPP library reorganize code around opp-microvolt- DT property (Viresh Kumar) - Allow any of opp-microvolt, opp-microamp, or opp-microwatt properties to be present without the others present (James Calligeros) - Fix clock-latency-ns property in DT example (Serge Semin) - Add a private governor_data for devfreq governors (Kant Fan) - Reorganize devfreq code to use device_match_of_node() and devm_platform_get_and_ioremap_resource() instead of open coding them (ye xingchen, Minghao Chi) - Make cpupower choose base_cpu to display default cpupower details instead of picking CPU 0 (Saket Kumar Bhaskar) - Add Georgian translation to cpupower documentation (Zurab Kargareteli) - Introduce powercap intel-rapl library, powercap-info command, and RAPL monitor into cpupower (Thomas Renninger)" * tag 'pm-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) PM: runtime: Adjust white space in the core code cpufreq: Remove CVS version control contents from documentation cpufreq: stats: Convert to use sysfs_emit_at() API cpufreq: ACPI: Only set boost MSRs on supported CPUs PM: sleep: Refine error message in try_to_freeze_tasks() PM: sleep: Avoid using pr_cont() in the tasks freezing code PM: runtime: Relocate rpm_callback() right after __rpm_callback() PM: runtime: Do not call __rpm_callback() from rpm_idle() PM / devfreq: event: use devm_platform_get_and_ioremap_resource() PM / devfreq: event: Use device_match_of_node() PM / devfreq: Use device_match_of_node() powercap: idle_inject: Fix warnings with make W=1 PM: hibernate: Complain about memory map mismatches during resume dt-bindings: cpufreq: cpufreq-qcom-hw: Add QDU1000/QRU1000 cpufreq cpufreq: tegra186: Use flexible array to simplify memory allocation cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain cpupower: Introduce powercap intel-rapl library and powercap-info command cpupower: Add Georgian translation cpufreq: intel_pstate: Add Sapphire Rapids support in no-HWP mode cpufreq: amd_freq_sensitivity: Add missing pci_dev_put() ...

dt-bindings: Add missing start and/or end of line regex anchors

2022-12-06T20:50:35Z

json-schema patterns by default will match anywhere in a string, so typically we want at least the start or end anchored. Fix the obvious cases where the anchors were forgotten. Acked-by: Matti Vaittinen Acked-by: Viresh Kumar Acked-by: Yoshihiro Shimoda Reviewed-by: Geert Uytterhoeven Acked-by: Mark Brown Acked-by: Sergio Paracuellos Acked-by: Guenter Roeck Link: https://lore.kernel.org/r/20221118223728.1721589-1-robh@kernel.org Signed-off-by: Rob Herring